• 한국음향학회지
• /
• 제25권1호
• /
• pp.1-6
• /
• 2006

천해에서의 수중음장 계산에서 음향 임피던스를 해저면 입력인자로서 도입하는 방안의 가능성을 고찰하였다. 먼저 탄성 해저면에서의 음파반사 특성을 고찰한 결과, 임계 접지각 이하에서 음향 임피던스는 접지각이 거의 $0^{\circ}$에 가까울 때의 임피던스 $Z_0$ 1개 값으로 근사가 가능함을 나타내었다. 이러한 특성과 'effective depth' 개념을 접목시켜 전달손실을 계산한 결과, 수중음장 계산에서 임피던스를 해저면 음향 특성을 나타내는 입력인자로 사용하는 것이 가능성이 있음을 확인하였다.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.37-43
• /
• 1998

The friction loss between piston rings and cylinder liner is due to the tension of the piston rings. Lubricant is usually supplied to reduce the friction. However, the sliding speed of the piston varies during the reciprocating cycle and is very low near TDC(Top Dead Center)/BDC(Bottom Dead Center), where the hydrodynamic lubrication cannot be sustained. Since the lubrication regime is shifted from the hydrodynamic to the boundary lubrication near TDC/BDC, wear particles are easily generated so that the friction loss becomes bigger and bigger due to the plowing effect of wear particles. In this study, for the purpose of reducing the friction loss, an undulated surface is adopted to the cylinder liner to trap wear particles. The friction force variations, which are measured by strain gaged, show that the concept of undulated surface is one of the promising methods to effectively reduce the friction between piston rings and cylinder liner.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.377-382
• /
• 2000

Film bulk acoustic resonator (FBAR) using AIN reactively sputtered at room temperature was fabricated. The FBAR is composed of a piezoelectric aluminium nitride thin film, top electrode of Al and bottom electrode of Au connected by a short (200${\mu}{\textrm}{m}$) transmission line on both sides and reflector layers of SiO$_2$- W Pair. The active areas of Al and Au were patterned using 150${\mu}{\textrm}{m}$ diameter shadow mask. The series resonance frequency (fs) and the parallel resonance frequency (fp) were measured at 1.976 GHz and 2.005 GHz, respectively. The minimum insertion loss and return loss were 6.1 dB and 37.19 dB, and the quality factor (Q) was 4261.

• Steel and Composite Structures
• /
• 제25권2호
• /
• pp.217-229
• /
• 2017

The effect of column loss location on the structural response of steel moment resisting frames (MRF) is investigated in this study. A series of nonlinear static and dynamic analyses were performed to determine the resistance of a generic frame to an arbitrary column loss and detect the structural members that are susceptible to failure progression beyond that point. Both force-controlled and deformation-controlled actions based on UFC 4-023-03 and ASCE/SEI 41-06 were implemented to define the acceptance criteria for nine APM cases defined in this study. Results revealed that the structural resistance against an arbitrary column loss in the top story is at least 80% smaller than that of the bottom story. In addition, it was found that the dynamic increase factor (DIF) at the failure point is at most 1.13.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.388-397
• /
• 2010

A two-dimensional time-domain, potential-theory-based fully nonlinear numerical wave tank (NWT) was developed by using boundary element method and the mixed Eulerian-Lagrangian (MEL) approach for free-surface node treatment. The NWT was applied to prediction of primary wave energy conversion efficiency of a bottom-mounted oscillating water column (OWC) wave power device. The nonlinear free-surface condition inside the chamber was specially devised to represent the pneumatic pressure due to airflow velocity and viscous energy loss at the chamber entrance due to wave column motion. The newly developed NWT technique was verified through comparison with given experimental results. The maximum energy extraction was estimated with various chamber-air duct volume ratios.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.889-898
• /
• 2022

In this study, sand casting process was applied to manufacture a large aluminum turbo-type fan used for tank powerpack. To apply the sand casting method, the turbo fan was reverse engineered, and after designing three gating systems, the optimal gating system design was selected by performing casting simulation. In the case of the bottom up-gating system, there is a significant temperature loss of the molten alloy during blade filling. When the molten alloy is completely filled into the sand mold, the blade upper tip and front shroud are below the liquidus temperature. In the case of the top down-gating system, molten alloy scattering occurs, but the temperature loss while the blade is filled is smaller than that of the bottom up type. And after the inflow of molten alloy into the mold is completed, the blade upper tip and front shroud are higher than the liquidus temperature. A sand mold was manufactured with the top down-gating system and the casting process was performed. The fan was made perfectly in appearance without any unfilled parts.

• 한국음향학회지
• /
• 제33권5호
• /
• pp.273-281
• /
• 2014

본 논문은 수온약층이 존재하는 제주도 근처 천해역 환경에서 획득한 수중음향 실험 데이터를 이용하여 장거리 신호 전달에 수온약층이 미치는 영향을 분석한 결과를 제시한다. 제주도 인근 해역에 서 장기간 측정된 한국해양자료센터의 수온 및 염분 관측자료는 계절에 따라 수온약층이 형성되는 것을 보여주며, 수온약층이 형성되는 시기에는 음향 신호가 해저면 방향으로 굴절하며 전파되므로 해저면에서의 반사 손실이 장거리 전파에 매우 큰 영향을 가진다. 본 연구에서는 2013년 5월에 수행한 제주 음향 통신 실험 (JACE13) 데이터를 이용하여, 수온약층이 존재할 때의 해저면 반사 손실을 추정하였다. 추정된 반사 손실은 약 3 dB 미만의 손실 값을 가지는 것으로 나타났으며, 수신기의 수심이 깊을수록 수신 신호 준위가 높게 나타났다. 이는 수온약층이 형성되는 천해역 환경에서는 수온약층 아래의 음향 트랩핑이 장거리 신호 전달의 주요 경로가 될 수 있음을 보여준다.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.918-924
• /
• 2009

As the population of overweight and obese children is rising rapidly around the world, there are many researches on purchasing and wearing children's clothing and optimal sizes, but researches on obese children are still inadequate. This study was carried out on 192 obese children over 75% in BMI. The purpose of the study was to set up the optimal interval of sizing system using the loss function which would be a guide for obese children for selecting ready to wear of suitable size. Introducing a loss function, which reflects how much the purchasing desire changes according to the difference, we formulate the problem and suggest a procedure to determine the optimal standard sizes minimizing the loss. These results were as follows ; In size chart of top's, 4 sizes had been determined by a loss function, had covered more than 91.1% of all subjects. In size chart of bottom's, 5 sizes had been determined by a loss function, had covered more than 87.0% of all subjects.

• Architectural research
• /
• 제24권3호
• /
• pp.63-74
• /
• 2022

Since lost child occurs frequently around us and there is a possibility of leading to an accident or a crime subsequently, it is necessary to study and have a plan for preventing child loss in advance. However, the preceding studies do not systemize the causes of child loss by places or situations, and the policy focuses only on the countermeasures afterward instead of prevention. In such perspective, this study derived the causes of child loss through the analysis of 202 cases by the bottom-up method. In addition, the causes were analyzed by dividing them into as negligence of guardian, breakaway of child, and environmental characteristics. As a result, it is found that children get lost by complex reasons usually with two or three causes combined together. And children got lost when guardians were not able to pay attention to their children, or when children moved away from their guardians. Furthermore, the environmental characteristics act as the catalyst by arousing child loss or making it more difficult for guardian to find the lost child. As a fundamental research, this study may be helpful in developing a environmental design certification system for preventing child loss in advance.

• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.105-115
• /
• 2010

산업의 발전과 함께 산업폐기물의 증가와 그에 따른 처리할 회사장 부족, 유해한 성분 함유로 인한 환경상의 문제 등에 대한 해결 방안의 일환으로, 본 연구에서는 석탄 화력발전소에서 발생되는 석탄회 중에서 bottom ash를 대상으로 콘크리트용 골재로서의 유용성 여부를 평가하고자 하였다. 먼저 잔골재와 굵은 골재의 대체재로서의 적절성 평가를 위해 경도시험, 입도분포시험, 흡수량시험, S.E.M 분석시험 등의 물리적 시험을 수행하였고, 화학적 시험으로는 강열감량시험, X-ray를 통한 분석시험을 수행하였다. 콘크리트에 적용하였을 때 미치는 영향은 대체재로서의 비율을 달리하여 작업성 확보차원에서 슬럼프의 변화를 측정하였고, 굳은 콘크리트에서는 강도확보, 내투수성, 동결융해 저항성, 내황산성, 탄산화 저항성에 대해 평가하였다. 실험결과, 미립분의 부족과 일부 bottom ash에서 결속력 상의 문제가 존재하였으나 천연골재와 혼합하여 사용하고 배출시 공정 개선을 한다면 골재로써 충분히 사용성이 있는 것으로 평가되었다. 또한, 다공성을 갖고 있어 작업성 확보를 위해서는 단위수량이나 감수제의 증가가 요구되지만 일반강도 한도 내에서는 일정 비율로 천연골재와 혼합하여 사용하면 강도 확보에 문제가 없고 오히려 내구성 확보에 있어서는 유리한 것으로 나타났다.