• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.173-179
• /
• 2014

This is an experimental study for recycling coal ash left over from coal use as a potential fine aggregate in concrete. Coal ash is generally divided into either fly ash or bottom ash. Fly ash has been utilized as a substitution material for cement in concrete mixes. On the other hand, bottom ash has the problem of low recycling rates, and thus it has been primarily reclaimed. This study partially substituted fine concrete aggregates with bottom ash to increase its application rate and therefore its recycling rate; its suitability for this purpose was confirmed. The concrete's workability dropped noticeably with increasing bottom ash content when a fixed water-cement ratio of concrete mix was used. Thus, concrete mixes with higher ratio levels are required. To address this problem, concrete was mixed using a polycarboxylate high-range water reducing agent. The fluidity and air entrainment immediately after mixing the concrete and 1 h after mixing were measured, thereby replicating the time concrete is placed in the field when produced either in a ready-mixed concrete or in a batch plant. As a result of this research, the workability and air entrainment were maintained 1 h after mixing for a concrete mixture with approximately 30% of its fine concrete aggregates substituted with the bottom ash. A slight drop in compression strength was seen; however, this confirmed that potential of using bottom ash as a fine aggregate in concrete.

• Journal of Korean Society of Forest Science
• /
• v.50 no.1
• /
• pp.45-48
• /
• 1980

Multivariate analysis methods were used to examine the relationships between top and bottom growth variables of hybrid poplars after coppicing and to discriminate between clones in coppice growth potential. Strong and linear relationship was exhibited between top and bottom growth variables. Clone 5328 was different from the other clones and the best among the clones in coppice growth potential.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.2
• /
• pp.51-57
• /
• 1993

It is often assumed that the wave velocity at the bottom given by potential wave theory il the same as the wave velocity at the top of the turbulent boundary layer. This assumption is found to be the major cause of the error detected by recent elaborate theories and numerical models for the description of velocity profile near the sea bottom. A relationship is suggested between the potential velocity and the real boundary velocity. Based on this relation, the existing theories of Jonsson (1967) and Fredsoe (1984) are refined for the estimation of wave friction factor, and the computation results of the modified theories are favourably compared with the published laboratory results.

• Ocean Science Journal
• /
• v.43 no.1
• /
• pp.9-16
• /
• 2008

Environmental qualities of coastal water and bottom sediment were assessed at Jordan's northernmost tip of Gulf of Aqaba to evaluate possible impacts of the bordering fish pen cages in Eilat. Results showed significant differences between surface and bottom water in the chemical and physical variables in the different months of the year (2004-2005). Chlorophyll a was also significantly higher in bottom water when compared to that of the offshore water. Nitrate and ammonia were significantly higher in bottom water than the surface water at each individual station. The upper 2 cm of sediment sample recorded higher values of total phosphorus and organic matter. Seasonality affected the content of total phosphorus, organic matter, redox potential and color especially at the sediment layer below 3 cm of the sediment core. The present investigation showed slight modification of water and sediment qualities but no clear sign of eutrophication was observed. However, to maintain sustainability of healthy environmental conditions at the northern tip of Gulf of Aqaba potentials of any possible environmental risks arising from the fish farms or any other coastal investment should be carefully considered.

• Environmental Engineering Research
• /
• v.15 no.4
• /
• pp.207-213
• /
• 2010

This study investigated the potential of using bottom ash to be used as an adsorbent for the removal of lead (Pb) from aqueous solutions. The physical and chemical characteristics of bottom ash were determined, with a series of leaching and adsorption experiments performed to evaluate the suitability of bottom ash as an adsorbent material. Trace elements were present, such as silicon and aluminum, indicating that the material had a good adsorption capacity. All heavy metals leached during the Korea standard leaching test (KSLT) passed the regulatory limits for safe disposal, while batch adsorption experiments showed that bottom ash was capable of adsorbing Pb (experimental $q_e$ = 0.05 mg/g), wherein the adsorption rate increased with decreasing particle size. The adsorption data were then fitted to kinetic models, including Lagergren first-order and Pseudo-second order, as well as the Elovich equation, and isotherm models, including the Langmuir, Freundlich and Dubinin-Radushkevich isotherms. The results showed that pseudo-second order kinetics was the most suitable model for describing the kinetic adsorption, while the Freundlich isotherm best represented the equilibrium sorption onto bottom ash. The maximum sorption capacity and energy of adsorption of bottom ash were 0.315 mg/g and 7.01 KJ/mol, respectively.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.39-49
• /
• 2022

Bottom ash generated from thermal power plants is mainly disposed in landfills, from which metals may be leached by infiltrating water. To evaluate the effect of metals in leachate on soil and groundwater, we characterized bottom ash generated from burning cokes, bituminous coal, the mixture of bituminous coal and wood pellets, and charcoal powder. The bottom ash of charcoal powder had a relatively large particle size, and its wood texture was well-preserved from SEM observation. The bottom ash of charcoal powder and wood pellets had relatively high K concentration from total element analysis. The eluates of the bottom ash samples had appreciable concentrations of Ca, Al, Fe, SO₄, and NO₃, but they were not a significant throughout the batch test. Therefore, it is considered that there is low possibility of soil and groundwater contamination due to leaching of metal ions and anions from these bottom ash in landfills. To estimate the trend of various trace elements, long-term monitoring and additional analysis need to be performed while considering the site conditions, because they readily adsorb on soil and aquifer substances.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.34-46
• /
• 2002

Carbon accounting is a key issue in the discussions on global warming/CO$_2$mitigation. This paper applies both the IPCC Approach and the NEAT (Non-Energy use Emission Accounting Tables) model, a bottom-up approach, to estimate the potential CO$_2$ emissions (carbon storage) originating from the non-energy use as to assess the actual CO$_2$ emissions (carbon release) from the use of fossil fuels in Korea. The current Korean carbon accounting seems to overestimate the potential CO$_2$ emissions and with it to underestimate the actual CO$_2$ emissions. The estimation shows that the potential CO$_2$ emissions calculated according to the IPCC Approach are lower than those calculated using the NEAT model. This is because the IPCC default storage fraction for naphtha seems to be low for the Korean petrochemical production structure, on the one hand and because the IPCC Approach does not consider the trade with short life petrochemical products, on the other hand. This paper shows that a bottom-up approach like the NEAT model can contribute to overcome some of limitations of the IPCC guidelines, especially by considering the international trade with short life petrochemical products and by estimating the storage fractions of fossil fuels used as feedstocks for the country in consideration. This paper emphasizes the importance of accurate energy statistics for carbon accounting.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.1
• /
• pp.32-39
• /
• 2012

New and renewable energy systems(solar thermal system, photovoltaic system, geothermal system, wind power system) are environmentally friendly technologies and these in South Korea are very important measures to reduce greenhouse-gas(GHG) and to push ahead with Green Growth. The purpose of this paper is to analyze GHG mitigation potential by distribution of solar thermal system in housing sector with bottom-up model called 'Long-range Energy Alternative Planning system'. Business as usual(BAU) was based on energy consumption characteristic with the trend of social-economic prospects and the volume of housing. The total amount of GHG emission of BAU was expected to continuous increase from 66.0 million-ton $CO_{2e}$ in 2007 to 73.1 million-ton $CO_{2e}$ in 2030 because of the increase of energy consumption in housing. The alternative scenario, distribution of solar thermal system in housing sector had GHG mitigation potential 1.54 million-ton $CO_{2e}$ in 2030. The results of this study showed that new and renewable energy systems made a contribution of reducing the use of fossil fuel and the emission of greenhouse-gas in building.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.982-984
• /
• 1997

DSM activities have grown and matured over several years in Korea. KEPCO is currently offering some DSM programs in industrial, commercial, and residential customers such as rebate program in purchasing efficient measures. The systematic evaluation process of energy savings and peak reduction will be very important for deciding on the optimal investment of DSM activities in utilities in the future. In general, the estimation process of the potential savings of DSM activities include the determination of baseline electricity consumption, the instantaneous technical potential (ITP), the phased technical potential (PTP), the economic potential (EP), and the achievable potential (AP). The purpose of this article is to provide evaluation process of those DSM potential savings based on bottom-up approach and applicate to residential sector in Korea. In case study, ITP, EP are estimated to be respectively 21.5%, 5.7% of total energy consumption, and 4.1%, 2.5% of peak load in 2010.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.992-997
• /
• 2016

This paper analyzes the deviation of tunneling current for the ratio of top and bottom gate oxide thickness of short channel asymmetric double gate(DG) MOSFET. The ratio of tunneling current for off current significantly increases if channel length reduces to 5 nm. This short channel effect occurs for asymmetric DGMOSFET having different top and bottom gate oxide structure. The ratio of tunneling current in off current with parameters of channel length and thickness, doping concentration, and top/bottom gate voltages is calculated in this study, and the influence of tunneling current to occur in short channel is investigated. The analytical potential distribution is obtained using Poisson equation and tunneling current using WKB(Wentzel-Kramers-Brillouin). As a result, tunneling current is greatly changed for the ratio of top and bottom gate oxide thickness in short channel asymmetric DGMOSFET, specially according to channel length, channel thickness, doping concentration, and top/bottom gate voltages.