• Nuclear Engineering and Technology
• /
• 제24권1호
• /
• pp.30-39
• /
• 1992

본 연구에서는 붕산주입 및 회석운전동안에 노심의 붕산농도를 변화시키기 위한 보충수 유량을 예측하고 화학 및 체적제어계통을 포함한 원자로 냉각재계통내에 있는 각종 계통에서 붕산농도 거동분석을 위한 종합적 붕산주입 및 희석모델(INBAD)이 제안되었다. 이 모델은 기존의 노심코드와 새로 개발된 붕산주입 및 희석모델로 구성되어 있으며 붕산주입 및 희석모델은 단일 cell 모델 및 다중 cell모델을 이용하여 본 연구목적에 맞게 개발되었다. 또한, 본 모델에서는 보다 실제적인 붕산농도 거동분석을 위하여 가변적 가압기 가열기 출력 및 선택적인 보충수 운전형태 (직접주입 또는 간접주입)가 모사되었다. 이 모델의 유용성을 증명하기 위하여 영광 3,4호기 설계자료를 이용하여 각종 계통에서 직접주입 및 간접주입운전에 대한 붕산농도 거동분석을 수행하였고, 노심의 붕산농도에 대한 가압기 가열기의 영향을 검토하였다. 그 결과 본 모델은 붕산주입 및 희석운전시에 각종 계통에서 붕산농도 변화를 정확히 예측할 수 있음을 보여 주었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권3호
• /
• pp.551-552
• /
• 2010

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2757-2772
• /
• 2023

The fluid retention effect of the Volume Control Tank (VCT) leads to a long time delay in Reactor Coolant System (RCS) concentration during the boration process. A coupled model combining a lumped-parameter sub-model and a computational fluid dynamics sub-model is currently used to investigate the concentration dynamic characteristic of RCS during the boration process. This model is validated by comparison with experimental data, and the predicted results show excellent agreement with experimental data. We provide detailed fields in VCT and concentration variations of RCS to study the interaction between mixing in VCT and the transient responses of RCS. Moreover, the impacts of the inlet flow rate, inlet nozzle diameter, original concentration, and replenishing temperature of VCT on the RCS concentration characteristic are studied. The inlet flow rate and nozzle diameter of VCT remarkably affect the RCS concentration characteristic. Too-large or too-small inlet flow rates and nozzle diameters will lead to unacceptable long delays. In this work, the optimal inlet flow rate and nozzle diameter of VCT are 5 m³/h and 58.8 mm, respectively. Besides, the impacts of the original concentration and replenishing temperature of VCT are negligible under normal operating conditions.

• Nuclear Engineering and Technology
• /
• 제15권1호
• /
• pp.11-22
• /
• 1983

가압 경수로의 노 냉각수 제어계통의 신뢰도를 해석하였다. 이 신뢰도 해석에서 붕소주입실패를 상위사고로 설정하였다. 신뢰도 해석은 고장계통도를 작성한 후 이 고장 계통도로부터 최소절군을 구하였다. 붕소주입실패에 의한 노 냉각수 제어계통의 불가용성은 1.497$\times$$10^{-5}$으로 계산되었다. 노 냉각수 제어계통의 불가용성에 가장 중요한 영향을 미치는 것은 붕산전달펄프의 신뢰도이며, 인간의 실수 역시 계통 신뢰도에 중요한 인자임이 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제25권6호
• /
• pp.889-894
• /
• 2004

Polyaddition reactions of 1,1-diethynyl-3-triethylsilyl-1-silacyclopent-3-ene with several organoborane derivatives have afforded the oligomeric materials containing organosilacyclic group and organoboron moiety along the oligomer main chains. All of these materials are soluble in THF as well as chloroform, and their molecular weights are in the range of 1,990/1,190-21,950/7,050 ($M_w/M_n$) with the polydispersity indexes of 1.67-3.43. The prepared oligomers are characterized by several spectroscopic methods such as $^1H,\;^{13}C, \;^{29}Si,\;^{11}B$ NMR and FTIR spectra along with elemental analysis. FTIR spectra of all the oligomers show that the new strong C=C stretching frequencies appear at 1599-1712 $cm^{-1}$, in particular. The UV-vis absorption spectra of the materials in THF solution exhibit the strong absorption bands at the ${\lambda}_{max}$ of 268-275 nm. The oligomeric materials show that the strong excitation peaks appear at the ${\lambda}_{max}$ of 255-279 nm and the strong fluorescence emission bands at the ${\lambda}_{max}$ of 306-370 nm. All the spectroscopic data suggest that the obtained materials contain both the organoboron ${\pi}$-conjugation moiety of C=C-B-C=C and the organosilacyclic group of 3-triethylsilyl-1-silacyclopent-3-ene along the oligomer main chains. The oligomers are thermally stable up to 162-200 $^{\circ}C$ under nitrogen.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.413-418
• /
• 1996

The main purpose of this paper is to develop the modified LTC code for accurate analysis of the boron concentration behavior of all components in the Nuclear Steam Supply System (NSSS). This is achieved by adapting a multi-cell mad to the existing Long Term Cooling (LTC) code. To verify the modified LTC, the simulated results were compared with the actual test results measured during YGN 4 initial criticality test. It was shown that the simulated results of this modified LTC were in good agreement with the actual test results. Also, the boron concentration behavior analysis were performed using the modified LTC code for both direct and indirect dilution/boration nude using YGN 3,4 design data. This modified LTC code can provide a valuable information in predicting boron concentration behavior during power maneuvering such as startup operation, shutdown operation and load follow operation. It is expected that the modified LTC can be applied to both on-line and off-line mode using Plant Computer System(PCS).

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3041-3046
• /
• 2014

Blue emitting materials, 9,10-bis-biphenyl-4-yl-anthracene (AC-P), 9,10-bis-[1,1';4',1"]terphenyl-4-yl-anthracene (AC-DP), and 9,10-bis[3",5"-deiphenyltriphenyl-4'-yl]anthracene (AC-TP) were synthesized through boration and Suzuki aryl-aryl coupling reaction. EL performance of blue light-emitters was optimized and improved by varying the chemical structures of the side groups. In the thin film state, the three materials exhibit $PL_{max}$ values in the range of 442-456 nm. EL device with the synthesized compounds in the following configuration was fabricated: ITO/4,4',4"-tris(N-(2-naphthyl)-N-phenylamino)triphenylamine (2-TNATA) 60nm/N,N'-bis (naphthalene-1-yl)-N,N'-bis(phenyl)benzidine (NPB) 15nm/synthesized blue emitting materials (30nm)/1,3,5-tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl (TPBi) 20nm/LiF 1nm/Al 200nm. The current efficiency and C.I.E. value of AC-TP were 3.87 cd/A and (0.15, 0.12). A bulky and non-planar side group helps to prevent ${\pi}-{\pi}^*$ stacking interaction, which should lead to the formation of more reliable amorphous film. This is expected to have a positive effect on the high efficiency of the operating OLED device.