• 한국건설안전학회 논문집
• /
• 제6권1호
• /
• pp.7-11
• /
• 2024

펌프카는 콘크리트를 타설하는 장소에 필요한 만큼 운반하는 장비로, 짧은 시간에 많은 양의 콘크리트 타설하기 위해서는 펌프카를 사용하는 것이 경제성 및 품질관리 측면에 가장 효율적이다. 그러나 최근에는 콘크리트 타설중에 붐 파손으로 인한 인명피해가 많이 발생하고 있으므로 본 연구에서는 장비 제작단계, 노후장비에 대한 검사기준, 장비대여제도 등의 개선이 필요함을 제언한다. 그 이유는 펌프카의 유한요소해석 결과, 붐 2단에서 작용하는 상당응력과 붐상단에서 최대응력이 895.39MPa로 나타났고, M.S. 0.04로 가장 낮게 평가되었으므로 보강의 필요성을 인식했다. 그리고 2단계 붐은 1~5단계 붐대 중 가장 스트레스가 많고, 취약한 부분임을 확인했다. 따라서 설계 및 제작 단계에서 부재의 두께와 강성을 높이고, 현재 사용되는 장비의 강판에 대한 보강이 필요하다. 또한, 일반 건설기계 전체에 대한 비파괴 검사를 의무적으로 반영하고, 비파괴검사 및 정기검사시 붐대 결함 누락에 대한 책임을 검사기관에 부담시키는 제도 구축이 시급하다.

• Composites Research
• /
• 제15권3호
• /
• pp.18-29
• /
• 2002

본 논문에서는 얇은 벽보로 모델링 한 위성체 구조물에 입사되는 열 하중에 의해 발생하는 굽힘 진동과 열적 플러터에 대하여 연구하였다. 복합재료 얇은 벽보는 회전관성과 1차, 2차 와핑, 전단변형의 비고전적 요소를 포함한다. CUS구조물로 모델링한 복합재료 얇은 벽보의 열 진동 특성은 적층 순서와 섬유강화복합재료의 방향특성인자로부터 기인된 종방향 굽힘과 횡방향 굽힘의 언성과 관련하여 연구되었다. 수치 해석적인 방법으로 열적 플러터의 안정성 영역의경계값을 구하였으며, 태양 열 플럭스의 입사각, 감쇠계수, 섬유각의 변화에 의한 보의 변위를 구하였다. 주 구조물에 압전소자를 부착하여, 감지기와 작동기로 사용하여 제어해석을 수행하였다.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.209-216
• /
• 1999

A self-travelling sprayer was developed to avoid the exposure of an operator to agricultural chemicals and exhaust gas, to improve safety and to increase working efficiency during the application and transport work in the greenhouses. This system consists of self-travelling system and the control system for application and safety device. The auto-spray car is equipped with a liquid chemical tank of 80l capacity. The travelling system adopted mechanical steering system which link mechanism of front wheel is guided by guide rollers. The sprayer travels along the guiding pipe which is set on the furrow in the greenhouses. The sprayer stops automatically applying and traveling when the liquid chemical tank becomes empty or when the sprayer reach the turning point. The spray booms swings in a vertical plane. The control system of safety devices controls the automatic stop of the sprayer when there is an obstacle on the traveling path, or when the battery becomes discharged. The auto-spray car traveled smoothly and steadily along the guide pipe during traveling straightly and turning on the ground.

• 한국석유지질학회:학술대회논문집
• /
• 한국석유지질학회 1999년도 제6차 학술발표회 발표논문집
• /
• pp.68-84
• /
• 1999

자연 미생물 분해 (Biodegradation)는 미생물들이 유출 기름 또는 기타 환경 오염물들을 분해시키는 자연 풍화 과정이며 이를 더욱 가속화시키기 위하여 인공적으로 미생물에 필요한 영양분 공급 또는 미생물들을 추가로 파종하는 것을 미생물 분해법 (Bioremediation)이라고 한다 현재 해상 기름 유출 사고 시 기계적 장비를 이용한 제거방법이 널리 사용되고 있으며 기계적 제거 방법의 대안으로서 화학분산제 (Chemical Dispersants) 사용과 현장 소각 (In-situ Burning) 방법이 있다. 또 하나의 대안으로서 이 미생물 분해법이 지적되고 있으며 충분한 시간이 주어질 때 해안으로 유입되는 기름에 대하여 일부 미생물들을 이용하여 유출 기름을 적어도 부분적으로 제거할 수 있다. 본 논문에서는 해상 유출 기름 제거를 위한 미생물 분해법의 종류와 기술의 잠재력 그리고 적용 시 고려하여야 할 문제점들을 분석하여 발생 가능한 피해를 최소화시키는데 필요한 정보들을 정리하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1631-1636
• /
• 2003

The purpose of this study is to analyze the phenomena of the thermally-induced vibration for the flexible space structure due to abrupt change of radiation heating circumstance using the numerical analyze and experiment test. In order to verify this structure, numerical approaches on the simplified flexible tube were compared with experimental test results at the ground experimental facility In this analyze, it was found that the thermal deformation occurs firstly due to fast radiation heating of flexible structure and then the thermally-induced vibration would be induced due to small periodic change of temperature. According to comparison of numerical and experimental result, in case of no tip mass, the first mode vibration by the numerical analyze was O.78Hz same as that of the experimental result However in case of increase tip-masses of 8g l6g, 50g and 100g, the first modes vibration theoretical analyze were 1.75Hz, 1.3Hz, 0.87Hz and O.73Hz, in decrease trend respectively and those by experimental test were 234Hz, 1.5Hz, O.78Hz and O.78Hz in decrease trend respectively Although using the simpled equation for the estimation, the estimation results were similar to experimental results.

• 한국수자원학회논문집
• /
• 제31권2호
• /
• pp.133-144
• /
• 1998

계속되는 도시 개발붐은 유역내 불투수지역을 증가시켜 첨두홍수유출량이 늘어나게 되었고, 도시지역 저지대에서 침수피해가 자주 그리고 크게 발생하게 되었다. 본 연구에서는 홍수침수피해를 최소화 하기 위하여 빗물펌프장의 과학적인 운영바안을 제시하였다. 첫째, 연구대상유역에 대하여 기왕의 강우사상에 맞는 도시 홍수유출모형으로 ILLUDAS 모형을 선정하였다. 둘째, ILLUDAS모형으로 재현기간별 강우사상에 대한 유출수문곡선을 모의한 후 강우지속기간에 따른 펌프가동대수를 구하고 서울지방의 강우강도(I)-지속기간(D)-재현기간(F) 곡선식으로부터 강우강도와 지속기간에 따른 펌프가동대수를 결정하는 펌프장 운영기준을 개발하였다.

• 한국시스템다이내믹스연구
• /
• 제3권1호
• /
• pp.43-60
• /
• 2002

This paper describes the forecast of wholesale price in competitive Korean electricity market using the system dynamics approach. The system dynamics concepts have been implemented with the Ithink software. This software facilitates the development of stock and flow model with information feedback. Using this model, the future wholesale electricity price can be computed hour by hour, quarterly, and yearly. This model also gives the energy planner the opportunity to create different scenarios for the future of deregulated wholesale markets in Korea. Also It will lead to increased understanding of competitive wholesale market as a complex, dynamic system. Research results show that the plant construction appeared in waves of boom and bust in Korean electricity market like real estate construction. That is, the Korea wholesale market's new power plants and the market price will appear the Boom and Bust cycle. It is very similar behavior as real estate industry. In case of consideration of DSM program, The DSM savings lead to a somewhat different timing of the booms in construction and of price spikes. But the DSM programs do not eliminated the fundamental dynamics of the boom and bust. And the wholesale price is maintained at the lower level compared to the case of without DSM program. However, the unexpected result is found that due to the lower market price, Investor make significantly less investment in new CCs, which leads to the higher wholesale price after 2010. It suggests that the DSM Policy must be implemented with the dynamics of competitive Electricity Market.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.34-42
• /
• 2010

Agricultural automation has become more and more important by environmental change. The automation demands the highest technology due to the ever changing various conditions in agriculture system. In the paper, semi-autonomous pesticide spray robot system has been developed for rose farming in the glass house. The robot is in autonomous mode during pesticide spraying process driven on pipe rail. The robot is manually driven while moving from a rail to the next rail. The drive platform and autonomous operation control system are developed based on IT fusion technology. The pesticide spray system is also developed with nozzles and booms for precision mist spray system. Experimental data of nozzle test is also included.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.86-91
• /
• 2006

Oil spills caused by the accidents have been occurred from house and factory waste, grounded tanker, the rupture of storage tank and oil pipelines, the deterioration of various industrial facilities, etc. Many oil spills result in contamination of shorelines and workplace. Fire and explosion may happen from these spills. There are several technologies used for clean-up application, which include use of oil dispersing agents, absorbents, solidifiers, booms and skimmers by physical, chemical, and biological methods. Methods for oil spill clean-up operation are classified into the absorption type, gel type and self-swelling type. Porous materials with oil absorptive properties are classified into micropore, mesopore, and macropore depending on their pore sizes. Recently, new porous materials with smaller size have been developed, but the selective oil absorption in water-in-oil interface demonstrates the macro pore size. In this study oil absorption effects were evaluated using the organic porous materials with a complex function of gel type and swelling type. Samples were subjected to analysis by FT-IR spectroscopy and were characterized in terms of gel formation and morphologies. Oil sorption capacity, pressure retention force and gel strength were also measured. From these results, the physicochemical reactivity before and after gelation was verified and the industrial applications of clean-up operation were suggested.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.308-310
• /
• 2005

In recent years, the research and development for the photovoltaic(PV) energy system are making rapidly progress around the world and specially this country, too due the deregulation law for the renewable energy system seems to be born sooner or later. In PV generation system, the partially shaded PV array is the one of the worst case which reduces the efficiency of the total PV generation system. The partial shaded condition is the result of shadowing by cloud and dust building of on the surface of the panel. Some structural elements, such as antennas, booms etc. is also the reason of the shadowing. Even if only a small part of PV is shaded, the overall generation power of PV is significantly decreased. Therefore, several researchers who are focusing on the PV generation system take a time for the research related with the shadowing problem of PV array. In this paper, authors have developed the method which users can achieved the modeling of partially shaded PV array with. With several papers authors have already announced the availability of the EMTDC/PSCAD PV panel model component. This research result is the developed version of the previous papers.