• 대한구순구개열학회지
• /
• 제6권2호
• /
• pp.131-135
• /
• 2003

Severe maxilla1y deficiency can be caused by cleft lip and palate(CLP), other craniofacial deformities, atrophy in the edentulous maxilla, and trauma. Patients with maxillary deficiency present a difficult treatment challenge. Traditionally, this skeletal deformity has been treated by Le Fort osteotomy, skeletal repositioning, and fixation with mini-plates and screws. The drawbacks of this method include a limited amount of anterior maxillary advancement often requiring simultaneous mandibular setback, the inability to create new bone, and minimal soft tissue adaptation to the new position, all of which increase the potential of relapse in case of large advancement. The alternative method of maxillary distraction osteogenesis offers promising results for successfully treatment of these patients while potentially minimizing the risk of relapse.

• Clinics in Shoulder and Elbow
• /
• 제11권1호
• /
• pp.62-65
• /
• 2008

견갑골의 견봉에서 일어나는 골절은 오구돌기, 관절와와 같은 다른 견갑골 부위의 골절과 동반되거나 견봉쇄골 관절 탈구와 동반되는 경우가 흔하며, 이들 대부분의 골절은 전위가 많지 않아 보존적인 방법으로 치료가 가능하다. 저자들은 견갑부 주위 골절의 동반 없이 단독으로 견봉 후외측부위에 골절 및 전위가 있는 환자에서 유관나사 및 K-강선을 이용한 내고정으로 좋은 기능적 결과를 경험하였기에 견봉 골절 내고정을 위한 술기적 특징 및 문헌적 고찰을 보고하고자 한다.

• Imaging Science in Dentistry
• /
• 제44권4호
• /
• pp.321-324
• /
• 2014

Postoperative maxillary cysts are locally aggressive lesions, usually developing as delayed complications many years after radical antral surgery. This report describes a case of bilateral postoperative maxillary cysts following orthognathic surgery performed approximately 21 years previously. The patient complained of stinging pain on her right cheek. Radiographic examination revealed low-attenuation lesions on both maxillary sinuses with discontinuously corticated margins without distinct expansion or bone destruction. The cysts were enucleated with the removal of metal plates and screws for pain relief. Histopathological examination confirmed the diagnosis of postoperative maxillary cysts lined by ciliated, pseudostratified columnar cells. The patient has remained asymptomatic thus far, and there was no evidence of local recurrence at 21 months of postoperative follow-up.

• Archives of Plastic Surgery
• /
• 제32권6호
• /
• pp.739-743
• /
• 2005

Subcondylar fractures have generally been treated by intermaxillary fixation except in cases where there is an absolute indication for open reduction. The reason behind a less aggressive surgical approach lies on the inherent difficulties in manipulating fragments in such a small area at the risk of damaging facial nerves or vessels such as the internal maxillary artery. However, long-term follow-up studies showed that conservative treatment of subcondylar fractures results in disturbances of occlusal function, deviation of the mandible, internal derangement of the temporomandibular joint, and ankylosis of the joint. We carried out open reduction of dislocated subcondylar fractures in 14 patients from 2000 to 2004 by a retromandibular approach. After the reduction of fractured bone, two H-shaped miniplates with 6 holes were fixed with screws at the anterior and posterior surfaces of the subcondyle. The retromandibular approach allowed good access and easy manipulation of the subcondyle. Immediate relief from malocclusion and correction of mandibular midline shifting were observed in all patients. Late temporomandibular dysfunction and ankylosis were not observed. Open reduction with plate osteosynthesis made it possible to avoid IMF in 7 of the 14 patients. The present study shows that open reduction through this retromandibular approach can produce good outcome in adult patients with subcondylar fracture.

• The Journal of Advanced Prosthodontics
• /
• 제4권4호
• /
• pp.254-258
• /
• 2012

Implant-supported overdenture is a reliable treatment option for the patients with edentulous mandible when they have difficulty in using complete dentures. Several options have been used for implant-supported overdenture attachments. Among these, bar attachment system has greater retention and better maintainability than others. SFI-Bar$^{(R)}$ is prefabricated and can be adjustable at chairside. Therefore, laboratory procedures such as soldering and welding are unnecessary, which leads to fewer errors and lower costs. A 67-year-old female patient presented, complaining of mobility of lower anterior teeth with old denture. She had been wearing complete denture in the maxilla and removable partial denture in the mandible with severe bone loss. After extracting the teeth, two implants were placed in front of mental foramen, and SFI-Bar$^{(R)}$ was connected. A tube bar was seated to two adapters through large ball joints and fixation screws, connecting each implant. The length of the tube bar was adjusted according to inter-implant distance. Then, a female part was attached to the bar beneath the new denture. This clinical report describes two-implant-supported overdenture using the SFI-Bar$^{(R)}$ system in a mandibular edentulous patient.

• 대한족부족관절학회지
• /
• 제22권4호
• /
• pp.173-176
• /
• 2018

Pigmented villonodular synovitis (PVNS) is a proliferative disease that affects the synovial joint, tendon and bursa. PVNS can form a nodular structure in any joint, but it most commonly affects the knee joint and is rare in the foot and ankle joint. PVNS is divided into two types. Localized-type PVNS exhibits focal involvement with a nodular mass, while diffuse-type PVNS involves the entire synovium. Synovitis of the affected joint can also destroy cartilage and bone. Diffuse type accounts for 75% of PVNS and has a reported recurrence rate of 12.2% to 46%; aggressive synovectomy is recommended as the most effective treatment. In localized-type PVNS, only arthroscopic partial synovectomy is effective with a lower recurrence rate. We report a patient with severe ankle joint arthritis induced by diffusetype PVNS. The patient was treated by lateral malleolar ostectomy and ankle arthrodesis with a plate and screws via a lateral approach.

• 대한족부족관절학회지
• /
• 제22권4호
• /
• pp.181-183
• /
• 2018

Hallux valgus is a deformity that causes pain in the first metatarsophalangeal joint. Surgical methods are quite diverse and a range of osteotomies are used at the proximal and distal part of the metatarsal bone and proximal phalange. Fixation methods, such as plate, screw, K-wire, and others have been used in various ways. The fixation device is often removed with various side effects due to the fixation devices. In the case of instruments that are absorbed in vivo, these procedures are not necessary to remove and there is an advantage of not performing the second operation. Three patients were treated, in which a proximal chevron osteotomy was used with a bioabsorbable screw (K-$MET^{TM}$; U&I Corporation).

• Hip & pelvis
• /
• 제35권1호
• /
• pp.47-53
• /
• 2023

Purpose: The purpose of this study is to compare the radiological results of fixation using the femoral neck system (FNS) and cannulated screw (CS) for treatment of femoral neck fractures. Materials and Methods: A retrospective study of patients with femoral neck fractures who underwent internal fixation and had follow-up of more than six months from 2010 to 2020 was conducted. A total of 87 patients were enrolled in the study. The FNS group included 20 patients and the CS group included 67 patients. Classification of fractures was performed according to Garden and Pauwels classification. Operation time, intraoperative blood loss, sliding distance of the implant, lateral soft tissue irritation caused by implants, and complications were evaluated. Results: The mean operation time was 40.30 minutes in the FNS group and 46.84 minutes in the CS group. The mean intraoperative bleeding volume was 51.25 mL in the FNS group and 72.16 mL in the CS group. Bone union was achieved in 18 patients in the FNS group (90.0%) and in 61 patients in the CS group (91.0%). The mean sliding distance of the implant was 4.06 mm in the FNS group and 3.92 mm in the CS group. No patients in the FNS group and 12 patients in the CS group complained of soft tissue irritation. Conclusion: A shorter operative time, less intraoperative bleeding, and less irritation of soft tissue were observed in the FNS group. FNS could be an alternative to CS for fixation of femoral neck fractures.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권5호
• /
• pp.559-566
• /
• 2007

Distraction osteogenesis(DO) is a surgical method of bone formation that involves an osteotomy and sequential stretching of the healing callus by gradual movement and subsequent remodeling. DO is used to correct facial asymmetry, such as in patients with hemifacial microsomia, maxillary or mandibular retrusion, cleft lip and palate, alveolar defects, and craniofacial deficiency. It is accomplished with the aid of a distraction device, which is secured with screws placed directly into bone, for a predetermined length of time. Hemifacial microsomia is characterized by unilateral facial hypoplasia, often with unilateral shortening of the mandible and subsequent malocclusion. Patients with hemifacial microsomia and facial asymmetry have a vertically short maxilla, tilted occlusal plane, and short mandible. Early treatment is necessary to avoid subsequent impaired midfacial growth. The standard treatment of these malformations consists of the application of bone grafts, which can lead to unpredictable growth. The new bone-lengthening procedure represents a limited surgical intervention and opens up a new perspective for treatment, especially in younger children with severe deformities. This report describes a case of hemifacial microsomia(Type-II left-sided hemifacial microsomia). The patient, a 10-year-old child, visited our clinic for facial asymmetry correction. He had a hypoplastic mandible, displaced ear lobe, 10 mm canting on the right side, and malocclusion. We planned DO to lengthen the left mandible in conjunction with a Le Fort I osteotomy for decanting and then perform a right intraoral vertical ramus osteotomy(IVRO). Progressive distraction at a rate of 0.5 mm/12 hours was initiated 7 days postoperatively. The duration of DO was 17 days. The consolidation period was 3 months. Satisfactory results were obtained in our case, indicating that DO can be used successfully for functional, aesthetic reconstruction of the mandible. We report a case involving DO in conjunction with orthognathic surgery for correcting mandibular hypoplasia with a review of the literature.

• 대한치과교정학회지
• /
• 제31권5호
• /
• pp.517-523
• /
• 2001

교정치료에서 원하는 치아이동을 위해서는 안정된 고정원이 필요한데 티타늄 미니스크류가 매식과 제거가 쉽고, 구강 내 여러 부위에서 적용이 가능하고, 환자가 느끼는 불편감이나 비용적인 부담이 적고, 제거 후에 치유가 빠르게 진행될 수 있는 등의 장점이 있어 최근에 교정적 고정원으로 사용되기 시작하였다. 티타늄 미니스크류를 교정적 고정원으로 사용한 임상 예들이 여러 편 발표되었는데 미니스크류의 이완이 가장 큰 실패의 원인으로 보고되고 있다. 그러나 지금까지 보고된 논문들에서 교정적 고정원으로 안정성을 줄 수 있는 스크류의 식립 길이에 관한 연구가 없는 상태이다. 교정적 고정원으로 미니스크류를 효과적으로 사용하기 위해서는 식립 부위에 따른 골구조와 골밀도 차이를 고려한 식립 길이에 관한 기준이 필요하다. 이에 본 연구에서는 성견의 상악골과 하악골에서 직경 2mm 티타늄 미니스크류를 다양한 길이로 식립하고 교정력을 적용한 후 그 안정성을 평가하여 교정적 고정원으로 사용될 수 있는 미니스크류의 식립 길이를 결정하고자 하였다. 미니스크류가 상악에서는 6mm 이상, 하악에서는 4mm 이상이 골 내에 식립될 때 8주 동안 200g의 교정력에 동요도나 위치변화를 보이지 않았다. 식립 부위로는 부착치은 부위 치근 사이에 식립될 때 구강청결이 유지되고 미니스크류 주변 치은조직에 자극을 주지 않아 정상적인 조직으로 유지 될 수 있었다. 또한 교정력 적용 8주 후 치근단 방사선 사진검사에서 스크류 주변 치근 흡수나 치조골 흡수, 치주 인대 손상이 관찰되지 않았다. 따라서 상$\cdot$하악 골밀도와 골구조의 차이를 고려하여 미니스크류의 골내 식립 길이를 적절히 조절함으로써 교정적 고정원으로 티타늄 미니스크류가 효과적으로 사용될 수 있다고 생각된다. 통계적으로 유의한 차이를 보였으나 Sn-Pg line와 Sn perp. 에서부터의 거리에는 차이가 없었다(p$44.32\%$ 떨어진 거리에 위치하였고, 피질골 절단술 시행시에 저항중심의 수직적 위치는 치경부에서 치근단 쪽으로 치근 길이의 $46.38\%$ 떨어진 거리에 위치하여 피질골 절단술 시행하지 않은 경우보다 치근단 쪽으로 이동되었으며, 후방견인력의 크기 변화에 따라 저항 중심의 수직적 위치는 변하지 않았다.Stainless Steel의 순이었다. 5. 비틀림실험은 0.016x0.022의 경우 Unitek Resilient가 가장 비틀림에 대한 저항이 큰데, 64.8회의 회전후 파절한다. 그 다음으로 Jinsung Stainless Steel, Unitek Hi-T, Ormco Stainless Steel, Unitek Standard(50.6회) 순이었다. 0.019x0.025의 경우 Jinsung Stainless Steel이 가장 커서 83.2회의 회전에 저항하고, Unitek Resilient, Unitek Standard의 순이고 Ormco와 Unitek Hi-T가 가장 저항력이 작았다. 6. 주사전자현미경으로 본 표면은 모든 제품에서 생산과정 중에 보이는 압흔과 pitting이 관찰되는데, 진성기업의 Stainless Steel은 가늘고 긴 압흔이 있으며 비교적