• Journal of Korean Neurosurgical Society
• /
• v.29 no.5
• /
• pp.668-674
• /
• 2000

Objective : The classic and accepted surgical method of compound comminuted depressed skull fractures (FCCD) involves total resection of all the contaminated bone and fragments at the fracture site. A second operation for cranioplasty is then performed at a later date. However, we have believed that primary repair of these bony defects can be achieved by the replacement of bone fragments at the time of the initial debridement, and this can be accomplished without danger to patient. The authors retrospectively reviewed the surgical results to assess the advantages and disadvantages, and also propose the selection criteria of replacement of fractured bone fragments as a primary procedure in FCCD. Materials and Methods : The authors analyzed the data extracted from medical records, and radiological findings in 22 of 71 patients with FCCD, who underwent immediate replacement of fractured bone fragments between April 1993 and October 1998. The mean follow-up period was 13.7 months. The selection criteria for the operation included the patients with mild to moderate severity, regardless of the degree of contamination or dural violation, which presented in hospital within 24 hours of injury. Results : The ages of the patients varied from 4 to 63 years, and there were 20 males and 2 females. Seventeen of 22 patients were fully conscious on admission and the others also had relatively good Glasgow coma scales. Sixteen fractures were located in the frontal area, 9 with involvement of the frontal sinuses, and 6 in the parietal and temporoparietal areas. Of the 22 patients, 8(36.3%) had dural lacerations with 3 of these requiring patching with pericranium, and 12(54.5%) had intracranial hematoma requiring wide craniotomy. The degree of wound contamination was also variable. Fifteen patients had relatively clean wounds, while seven(31.8%) had seriously contaminated wounds with soil, sand, hair, and wood. Only one patient(4.5%) developed infection, and the bone fragments were removed. All wounds healed primarily without pulsatile defect, the skull has remained solid, and no complications have occurred, except the infected case. Conclusion : It is proposed that bone fragments removal for FCCD, regardless of the degree of contamination or dural violation, is not necessary and that primary bone fragments replacement avoids a second operation for cranioplasty.

• Journal of Veterinary Clinics
• /
• v.34 no.6
• /
• pp.463-466
• /
• 2017

A 3-year-old, 26 kg, castrated male Chow Chow was presented for assessment of weight-bearing lameness of the left hind limb. The patient had a history of triple pelvic osteotomy on the left side to correct hip dysplasia 2 years prior to his presentation of clinical signs and underwent total hip replacement on the right coxofemoral joint 1 year later. Upon physical examination, pain and crepitus were noted on the left hip joint during extension. Radiological examination revealed coxofemoral joint subluxation and moderate degenerative bone changes on the left hip joint and pelvic axis, which relates to acetabular angles that were changed after triple pelvic osteotomy (TPO). Preoperative computed tomography was used for 3-dimensional printing to establish an accurate surgical plan. The changed angles of the acetabulum after TPO were evaluated, and rehearsal surgery was performed using a 3-demensional printing bone model. Three months after the THR surgery, the function of the affected limb had improved, with no lameness. Complications, such as luxation and implant failure, were not observed until 6 months after the operation. Accurate evaluation of acetabulum angles and rehearsal surgery using a 3D-printed bone model is effective for total hip replacement after unsuccessful TPO.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.17-24
• /
• 2000

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.1
• /
• pp.87-94
• /
• 2001

The present study was performed to investigate the effect of $HTR^{(R)}$ (Hard Tissue Replacement) on osteogenesis in the mandibular bone defects. Eight adult male white rabbits weighing 2.5 to 3.0kg were used. Four bone defects (8mm in diameter and 4mm in depth) were made at the both mandibular body. In the control group, the right mesial bone defect was filled with blood clot and spontaneously healed. In the DFDB group, the right distal bone defect was filled with xenogenic demineralized freeze-dried bone. In the $HTR^{(R)}$ group, the left mesial bone defect was filled with $HTR^{(R)}$. In the $HTR^{(R)}-membrane$ group, the left distal bone defect was filled with $HTR^{(R)}$ and covered with BioMesh membrane. The rabbits were sacrified at 2,4,6 and 9 weeks after the operation and microscopic examination was performed. Results obtained were as follows: In the control and DFDB groups, inflammatory cells and the fibrous connective tissue existed and the bone growth was slower than $HTR^{(R)}$ group by 6 week, and there was intervention of the soft tissue at 9 week. In the $HTR^{(R)}$ group, bone trabeculi extended between the $HTR^{(R)}$ particles without intervention of inflammatory cells and the connective tissue at 4 and 6 weeks. In addition, extensive osseous ingrowth into the $HTR^{(R)}$ particles was observed at 9 week. Bone formation was more active in the $HTR^{(R)}$ group than the control and DFDB groups. There was not obvious difference in the bone healing rate between the $HTR^{(R)}$ and the $HTR^{(R)}-membrane$ group. These results suggest that the $HTR^{(R)}$ promotes osteogenesis in the bone defects and the $HTR^{(R)}$ group has no difference in comparison with the $HTR^{(R)}-BioMesh^{(R)}$ membrane group in bone healing.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.2
• /
• pp.76-79
• /
• 2014

In treatment of failure in ankle joint replacement therapy, talar avascular necrosis with massive bone defect, talus fracture with severe comminution and bone defect and ankle dislocation, treatment of large bone defects is considerably important for ankle joint stability and union, therefore, the choice of treatment for large bone defects is use of femoral head or iliac crest bone graft and rigid internal fixation. Because first generation total ankle arthroplasty performed for the first time using a cemented fixation technique requires a large amount of bone resection during re-surgery and there is some possibility of a larger bone defect after removal of implants, in cases where prosthesis for the defect is needed, performance of palliative femoral head or iliac crest bone graft and rigid internal fixation can be difficult. We report on a case of a 48-year-old woman who had experienced ankle pain for 25 years since undergoing total ankle arthroplasty. Because the patient had little ankle motion and rigid soft tissue despite a large bone defect caused by aseptic loosening, a good outcome was obtained only for the femoral cancellous bone graft using allo femoral head without internal fixation.

• Journal of the Korean Arthroscopy Society
• /
• v.1 no.1
• /
• pp.72-80
• /
• 1997

Numerous techniques of anterior cruciate ligament (ACL) reconstruction have been described in literature. All have inherent advantages and disadvantages. The central one-third patellar tendon and hamstring tendons are the most commonly used autogenous tissues for replacement of a torn anterior cruciate ligament. Although the central one-third patellar tendon is considered to be 'the gold standard' for replacement of torn ACL. equivalent results have been reported using hamstring tendon grafts. Autogenous hamstring grafts provide adequate strength while avoiding donor site morbidity associated with bone-tendon-bone harvest. $EndoButton^{\circledR}$ femoral fixation allows precise femoral tunnel placement without a second incison. The purpose of this article is to describe surgical techniques using a quadrupled semitendinosus tendon and $EndoButton^{\circledR}$ fixation, and review the results of replacement of ACL.

• Journal of Korean Foot and Ankle Society
• /
• v.25 no.4
• /
• pp.181-184
• /
• 2021

End-stage ankle arthritis is a debilitating condition that causes functional limitations and consequently a poor quality of life. Total ankle replacement arthroplasty is a good alternative to arthrodesis for preserving the ankle's range of motion. However, many complications can occur in patients with rheumatoid arthritis and with poor soft tissue and bone conditions. A 61-year-old female experienced spacer subluxation after surgery, which was not reduced by medial soft tissue release and spacer change. Buttress plating was found to be a good treatment option to prevent spacer subluxation and can be considered in patients with rheumatoid arthritis with bone erosion and soft tissue damage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2777-2785
• /
• 2000

In cementless total hip replacement(THR), an initial stability of the femoral component is important to long term fixation of femoral stem. The intial stability has close relationship with the relative displacement of prosthessis and sponge bone at the proximal of femur. After implantation of the proshesis, the surrounding bone is partially shielded from load carrying and starts to resorb. Stress shielding is the cause of the loss of proximal bone. Assessing stress distribution of femur is important to predict stress shielding. The initial stability and the stress shielding were investigated for two loading conditions approximating a single leg stance and a stair climbing. Three types of stems were studied by the finite element method to analyze the biomechanical effects of distal filling of cementless femoral stems. Three types of stems empolyed are a distal filling stem, a distal flexible stem, and a distal tapered stem.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.951-955
• /
• 2001

The experimental comparison between bonded and unbonded types stem-cement interface was carried out on axisymmetric stem-cement-aluminum model of the femoral component of a total hip replacement. Human femur was modeled in non-tapered and tapered($7.5^{\circ}$) aluminum hollow cylinders to emulate the diaphyseal and metaphyseal segments of the femur. For unbonded type, we tested stems with three different taper angles($5^{\circ},\;7.5^{\circ},\;10^{\circ}$). In every case, the cement-aluminum interface was designed to endure 8MPa shear strength. (a measured value at cement-bone interface) We tested aluminum models under axial loading for both cases. As an experimental result, it was found that unbonded stem sustained more axial load as bonded stem in both cases, diaphyseal and metaphyseal models. The unbonded types failed in cement mantle under axial compressive load, while the bonded ones failed in shear at cement-aluminum interface. These results suggest that a polished stem will sustain much higher axial load than a roughened stem. And a polished stem will make more stable cement-bone interface that may promote better osteosythesis around the stem.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.37-43
• /
• 2018

In orthopedic surgery and in particular in total hip arthroplasty, the implant fixation is carried out using a surgical cement called polymethylmethacrylat (PMMA). This cement has to insure a good adhesion between implant and bone and a good load distribution to the bone. By its fragile nature, the cement can easily break when it is subjected to a high stress gradient by presenting a craze zone in the vicinity of inclusion. The focus of this study is to analyze the effect of inclusion in some zone of cement in which the loading condition can lead to the crack opening leading to their propagation and consequently the aseptic loosening of the THR. In this study, the fracture behavior of the bone cement including a strange body (bone remain) from which the onset of a crack is supposed. The effect of loading condition, the geometry, the presence of both crack and inclusion on the stress distribution and the fracture behavior of the cement. Results show that the highest stresses are located around the sharp tip of bony inclusion. Most critical cracks are located in the middle of the cement mantle when they are subjected to one leg standing state loading during walking.