• 한국가금학회지
• /
• 제8권2호
• /
• pp.55-68
• /
• 1981

칼슘과 인은 동물의 골격형성 및 반 평형유지에 필수적일 뿐 아니라 란각의 중요간 구성물질이다. 그러나 가금의 주요 원료사료인 식물성사료는 대부분 칼슘과 인의 함량이 낮으며 그 이용성도 낮아 별도로 추가공급이 필요하다. 따라서 칼슘과 인의 기능을 밝히고 요구량을 찾아내며, 그 공급원 및 이용성을 조사하는 것은 매우 중요하다. 이제까지 칼슘과 인의 영향적 특성 및 공급에 관해 고찰하였는 바 결과를 요약하면 다용과 같다. 1. 칼슘과 인은 정상적인 기능을 수행하기 위해 비타민D 및 Na 등과 긴밀한 상호작용을 가지고 있다. 2. 대부분의 식물성 사료내에 들어 있는 인은 피 틴태로서 단위 동물에는 이용성이 낮으며 가축의 년령이 증가하거나 비타민D$^3$의 급여가 증가하면 피틴태 인외 이용율도 다소 증가한다. 일반적으로 동물성사료 및 무기가물사료내 존재하는 칼슘과 인은 이용성이 상당히 높다. 3. 가금의 칼슘과 인의 요구량은 부로일러 및 산란용 초생추의 경우 칼슘 1.0% 인 0.7% 내외이며. 산란계의 경우 칼슘 3.5% 인 0.4% 수준으로 요약되었는데 이는 최근 NRC(1977)의 요구량 수준과 비슷하다. 4. 칼슘과 인의 공급은 사료섭취량이 적은 경우 공급수준을 증가시켜 주는 것이 바람직하며 산란계의 경우 산란율이 높거나 년령이 오래된 닭의 경우 칼슘의 급여량을 증가시켜 3.75%까지 급여하는 것이 좋다. 실제 사육시에는 칼슘과 인의 이용율을 고려하여 요구량 수준보다 20%정도 증가시켜 주는 것이 바람직하다. 5. 칼슘과 인 공급제의 이용성은 제1, 제2, 제3 인산칼슘. 탄산칼슘, 골분, 석회석, 패분등이 가장 우수하였으며 연인광석, 탈불인광석, 석고등은 다소 떨어졌다. 산란계의 경우 칼슘공중제로서 방해 석은 석회석이나 패분과 비교해 볼때 거의 같은 효과를 가지는 것으로 나타났다. 따라서 방해석은 새로운 칼슘공급제로서 효과적으로 사용될 수 있을 것이다. 6. 칼슘공급제의 입자도가 산란능력에 미치는 영향은 아직 확정지을만한 결과를 얻지 못하고 있으나 일반적으로 패분은 입자도가 굵을때 석회석은 입자도가 미세할 때 산란능력이 우수하였다. 7. 산란계에 있어서 패분과 석희석을 단용 하는 것보다 혼용하면 그 이용성이 증가하였다. 8. 사료내 Na의 농도가 높으면 인의 급여량도 높여 주는 것이 산란능력 향상에 도움이 되었으며 Na수준이 낮은경우는 인의 급여수준도 낮추는 것이 바람직한 것으로 나타났다.

• 생명과학회지
• /
• 제24권3호
• /
• pp.297-303
• /
• 2014

대황(Eisenia bicyclis)은 온대 태평양에 서식하며 우리나라에서는 울릉도 일대에서 주로 발견 되는 갈조류이다. 대황은 칼슘 함량이 가장 높고 요오드, 철, 마그네슘뿐만 아니라 많은 미네랄과 비타민을 포함하고 있다. 본 연구에서는 대황 추출물을 이용하여 세포 수준에서 대황의 골 형성에 미치는 영향을 검토하였다. MTT 분석법에 의한 조골세포 증식률에서는 대황 에탄올 추출물 10 ${\mu}g/ml$ 처리하였을 때 128%의 높은 활성을 나타내었다. 반면 열수추출물 첨가군에서는 에탄올 추출물에 비해 유의적으로 낮은 활성을 나타내었고, 첨가 농도가 증가할수록 감소되는 결과를 보였다. 대황 추출물의 농도에 따른 석회화 형성에 미치는 영향을 검토한 결과, 대황의 에탄올 추출물 1~100 ${\mu}g/ml$의 범위에서 시료를 처리 하지 않은 대조군에 비해 높은 골석회화 형성능을 나타내었다. 또한, 적색의 석회화 형성 부위를 현미경을 통해 관찰한 결과, 대황의 에탄올 추출물을 처리 하였을 때, 시료를 처리하지 않은 대조군 보다 붉은 색의 반점이 많이 형성된 것을 확인할 수 있었다. 한편, ALP 활성에서는 에탄올 추출물 50 ${\mu}g/ml$에서 179% 활성을 나타내었다. 파골세포인 RAW 264.7 세포를 이용하여 세포 증식률을 측정한 결과, 대황 열수추출물의 경우 1~200 ${\mu}g/ml$의 모든 농도에서 대조군과 비교하여 유의적으로 감소하여 파골세포의 증식억제 효과가 나타났다. 파골세포의 분화형태를 측정하고자 TRAP 효소 활성을 측정한 결과, 열수 및 에탄올 추출물의 10 ${\mu}g/ml$이상의 농도에서 대조군에 비해 감소하는 경향을 나타내었다. 대황 추출물의 첨가 농도가 증가함에 따라 파골세포의 증식이 감소된 결과와 마찬가지로 파골세포의 분화 지표인자인 TRAP활성 역시 농도가 증가함에 따라 감소함을 알 수 있었다. 이상의 결과, 대황 추출물이 조골세포의 증식, 분화유도와 석회화능을 촉진하고 파골세포의 증식 및 분화를 억제시킨다는 것을 알 수 있었다. 향후 대황 추출물 중의 활성성분들의 규명과 in vivo 연구가 병행된다면 조골세포의 증식과 파골세포의 억제에 관여할 수 있는 기능성 식품의 천연소재로 개발이 가능하리라 사료된다.

• 생명과학회지
• /
• 제27권4호
• /
• pp.456-463
• /
• 2017

본 연구는 3종의 한약재(감초(Glycyrrhizae radix), 황기(Astragali radix) 및 산약(Dioscorea rhizome)) 추출물의 에스트로겐 유사활성 및 조골세포 증식과 분화에 미치는 영향을 검토하고자 실험을 진행하였다. 에스트로겐 유사활성 측정을 위하여 인체 유방암 세포주인 MCF7 세포를 luciferase 유전자를 리포터로 사용하는 에스트로겐 반응성 리포터 시스템을 가지는 세포로 형질전환하여 사용하였다. 상기 세포를 이용하여 추출물의 에스트로겐 유사활성을 측정한 결과, 한약재 추출물이 음성대조군과 비교하여 1.11배~5.73배 높은 에스트로겐 유사활성을 나타내었다. 그 중 감초 추출물이 가장 높은 에스트로겐 유사활성을 보였다. 감초 추출물의 에스트로겐 유사활성은 추출물의 농도가 $50{\mu}g/ml$ 및 $500{\mu}g/ml$ 일 때 각각 $10^{-8}M$ 및 $10^{-7}M$ $17{\beta}-estradiol$과 거의 유사한 활성을 나타내었다. 조골세포주인 MC3T3-E1 세포를 이용한 실험에서는 감초 추출물의 농도가 $1{\sim}1,000{\mu}g/ml$ 범위일 때 독성을 나타내지 않았다. 황기 추출물은 조골세포에 있어서 유의적인 세포 증식률을 보이지 않았다. 그러나, 감초 및 산약 추출물은 각각 148% 및 133%의 최대 증식률을 보였다. 또한, 감초 추출물은 대조군과 비교하여 alkaline phosphatase(ALP) 활성이 증가하였으며, 추출물의 농도가 $100{\mu}g/ml$ 일 때 최대 122%의 ALP 활성을 나타내었다. 또한, Alizarin red S 염색법을 이용한 석회화 형성능 측정에서도 대조군과 비교하여 석회화가 증가하였다. 이러한 결과로 미루어 보아 감초 추출물이 골 형성 및 골다공증 예방 효과가 우수한 식품 소재인 것으로 사료된다.

• 한국식품조리과학회지
• /
• 제16권6호
• /
• pp.652-662
• /
• 2000

섭취 빈도가 높은 어류중 붉은 살 생선인 고등어(Mackerel), 삼치(Saury pike), 방어(Yellowtail), 연어(Salmon), 흰 살 생선인 조기 및 염장조기(Croaker, Salted Croaker), 및 갈치(Trichiurus)를 시료로 하여 , 가스그릴, 전기그릴과 microwave oven으로 가열 조리한 후 일정기간 동안 냉장 및 냉동 보존한 시료와 보존한 시료를 microwave로 재가열하였을 때 변이원성을 in vitro test로 Ames/salmonella assay를, in vivo test 로 Micronucleous test를 실시하여 검색하고, 그 제어방법으로 항암성분을 많이 함유하고 있는 녹황색 채소즙으로 전처리하여 돌연변이 억제능을 검토하고자 한다. 또한, 지질의 과산화도를 측정하여 변이원 생성과 과산화 지질간의 상관성을 검토한 결과는 다음과 같다. 1.어류의 가열조리에 의해 대조군(생시료)보다 변이원성이 유의적으로 증가되었는데 , 생성된 변이원은 모두 농도 의존성을 나타내었으며, 5 mg/plate인 농도구간에서 돌연변이원성이 유의적으로 높게 나타났다(p<0.05). 2. 조리온도가 높아질수록 변이원성이 유의적으로 높아졌으며 대사활성물질을 첨가했을 경우 무첨가시보다 2-4 배정도 돌연변이원성이 높게 나타났다. 3. 조리기기에 따른 복귀 돌연변이 균수는 가스그릴과 전기그릴군 간에는 유의적인 차이가 없었으나 MW에서 조리한 시료의 경우에는 유의적으로 낮게 나타났다(p<0.05). 4. 생선 종류별 변이원성을 검색한 결과 흰살 생선이 붉은 살 생선에 비해 유의적으로 낮은 변이원성을 나타내었으며, 붉은 살 생선간에 유의적인 차이는 나타나지 않았으나 고등어가 약간 높은 변이원성을 나타내었고, 흰살 생선중에서도 유의차는 없었으나 염장조기가 가장 낮은 변이원성을 나타내었다. 5. 채소즙 및 녹차 추출물로 처리 후 가열조리을 한 시료의 경우 모두 대조군에 비해 유의적으로 변이원성이 억제되었으며, 녹차>생강＞무순으로 변이원성 억제효과가 나타났다. 6. 저장에 의해 돌연변이원성이 유의적으로 증가하였는데, 냉장 저장시 저장 3일째부터, 냉동저장시에는 저장 7일째부터 변이원성이 유의적으로 증가하였다. 냉동저장보다 냉장저장시 더 높은 변이원성을 나타내었고 MW에 의한 재가열에 의해 변이원성이 증가되었다. 7. Micronucleus test 결과, 조리온도가 증가할수록 골수 소핵 형성이 유의적으로 증가되었고, 채소즙 처리군의경우 생강>녹차＞무순으로 골수 소핵 형성 억제효과를 보였다. 8. 조리, 재가열 및 저장 조건에 따른 산패도(TBA value)를 측정한 결과 저장기간이 길어질수록 산패도가 증가하였고 냉장 저장시료의 경우 저장 3일째부터 유의 적으로 산패도가 증가되었으며 냉동 저장 시료의 경우에 는 저장 7일째부터 유의적으로 높은 산패도를 나타내었다. 냉장저장 시료가 냉동저장 시료보다 더 높은 산패도를 나타내었으며, microwave에 의한 재가열에 의해 산패도가 증가되었다. 9. 채소즙 및 녹차 추출물로 처리 한 고등어의 DPPH에 대한 전자공여능(%EDA)측정 결과는 양파>녹차＞생강>양배추 순으로 양파의 전자공여능이 가장 높게 나타났다. 10.전기그릴 26$0^{\circ}C$에서 조리한 시료의 냉장저장 및 냉동저장에 따른 변이원성과 과산화지질 생성간의 상관관계는 냉장 저장했을 때 0.93으로 높은 상관관계를 나타내었고 재가열했을 경우 0.98로 상관관계가 더 높게 나타났다. 냉동저장 역시 0.92를 나타내어 상당히 높은 상관관계를 나타내었으나 재가열했을 경우에는 0.89로 오히려 낮은 상관관계를 보였다.

• 한국식품영양과학회지
• /
• 제34권6호
• /
• pp.805-813
• /
• 2005

본 연구팀에서는 방사선으로부터 위장관과 면역 조혈계를 보호하기 위하여 당귀, 천궁, 백작약으로부터 새로운 생약복합물 HIM-I을 개발한 바 있다. 본 연구에서는 방사선 방호뿐 아니라 다양한 생체질환의 예방에 있어 면역조혈기능이 중추적인 역할을 한다는 관점에서, HIM-I로부터 면역조혈 기능을 더욱 증진시킨 생약복합조성물 HemoHIM을 제조하여 그 효능을 검증하였다. HIM-I를 에탄을 침지하여 에탄을 분획(HIM-I-E)과 조다당 분획 (HIM-I-P)을 얻은 후, HIM-I 에 조다당 분획을 첨가하여 HemoHIM을 제조하였다. 이렇게 얻은 HemoHIM, HIM-I 및 각 분획에 대하여 재생조직 및 면역계 방호와 회복촉진 효과를 비교 검증하였다. HemoHIM 과 HIM-I는 시험 관내에서 방사선에 의한 DNA 손상을 유의 적으로 억제하고 수산화 라디칼을 소거하는 효과가 있음이 관찰되었으며, HemoHIM과 HIM-I는 거의 비슷한 활성을 나타내었다. 시험 관내 면역 세포 활성화와 골수세포 성장촉 진 실험에서는 HemoHIM이 HIM-I 비하여 높은 활성을 보였으며, 이는 HIM-I에 비해 높은 조다당 함량에 기인한 것으로 보인다. 감마선 조사 마우스를 이용한 생체 보호효과를 살펴본 결과, HemoHIM은 HIM-I와 비슷한 정도의 소장 움 생존율 증가효과를 보였으나, 내재성 비장 조혈세포집락 형성 시험에서는 HemoHIM은 HIM-I보다 높은 효과를 나타내었다. 또한 방사선조사 마우스에서 HemoHTM의 투여는 방사선 조사후 급격히 감소된 말초 혈액내 백혈구 및 림프구수의 회복을 촉진시키고, 생존율을 증대시키는 효과가 관찰되었다. 이상의 결과들은 생약복합물 HIM-I 조다당 분획을 첨가하여 개발한 새로운 생약복합조성물 HemoHIM이 방사선에 의해 유발된 위 장관 및 면역계 조직의 손상을 감소 시켜 생존을 증가시키는 효과가 있음을 제시하였다. 특히 HemoHIM은 HIM-I와 비교하여 재생조직의 산화적 손상억제 효과는 비슷하게 유지되면서도 면역 조혈세포 방호 및 회복촉진 효과가 높은 것으로 관찰되어 방사선 방호제로서 뿐만 아니라 면역조혈기능 증진제로서 유용하게 활용될 수 있을 것으로 사료된다.

• 한국식품영양과학회지
• /
• 제42권5호
• /
• pp.697-704
• /
• 2013

본 실험에서는 primary culture된 연골세포 in vitro 실험모델과 MIA로 유발한 골관절염 in vivo 실험모델을 이용하여 꾸지뽕나무 잎 추출물의 관절염 예방 효과를 확인하였다. 먼저 MTT 시험법을 통해 세포 사용 적정농도를 $500{\mu}g/mL$ 이하로 결정하여 연골세포사멸 억제를 확인하고, 이를 근간으로 골관절염 동물실험 모델에서 골관절염 예방효과를 확인하였다. $H_2O_2$ 처리에 따른 산화적 독성으로 연골세포 사멸을 유도한 실험에서 꾸지뽕 잎 추출물은 정상세포 수준으로 사멸을 억제하였으며, 이러한 효과는 CTL80의 $200{\mu}g/mL$, CTL10의 $300{\mu}g/mL$ 농도에서 비교적 높게 나타났다. 교원질 합성을 억제하고 분해를 촉진시키는 MMPs(MMP-7, MMP-13)의 발현을 실시간 정량 PCR로 측정하여 발현변화를 살펴보았다. 그 결과 앞선 세포실험 결과와 마찬가지로 CTL80과 CTL10 처리군에서 발현이 유의적으로 낮아졌음을 살펴볼 수 있었다. 특히 CTL80에서 MMP-7과 MMP-13의 발현이 농도 유의적으로 감소하였으며, CTL10의 경우 200, $300{\mu}g/mL$ 농도에서 유의적으로 발현이 감소하는 것을 확인하였다. 세포실험 결과를 바탕으로 동물실험에서의 적정농도를 결정하였으며, 동물독성실험 결과 이상이 없음을 확인하고 실험을 진행하였다. 이때 세포실험결과 선정된 두농도(200, $300{\mu}g/mL$) 간의 차이가 미미하여 동물실험에 적용할 경우 비슷한 실험결과가 나타날 것으로 사료되어 두 실험군 간의 결과를 정확히 구분 짓기 위해 200, $500{\mu}g/mL$ 농도를 선정하여 사용하였다. 골관절염 유발 동물모델을 만들기 위해 SD rat의 관절강에 MIA를 injection 하였으며, 꾸지뽕 잎 에탄올 추출물 투여에 따른 관절염 예방 효과를 관찰하기 위해 관절염 유발 2주일 전부터 1일 1회 경구투여를 실시하고, 유발 후 3주간 지속적으로 투여하고 관찰하였다. 동물 관절의 병리학적 변화를 관찰하기 위하여 Micro-CT 촬영 및 분석을 실시한 결과 Control 군은 골의 강도와 밀도가 감소한 반면, 양성대조군인 MTX 투여군에서 정상군과 비슷한 수준으로 회복된 것을 확인하였고, CTL80-200군과 CTL10-500군에서 Control 군에 비해 유의적으로 수치가 감소하여 골관절염에 따른 손상이 감소한 것을 확인하였다. 동물의 관절조직의 H&E 염색을 통한 조직학적인 변화에서는 골관절염 유발로 연골세포의 손상과 뼈조직의 손상을 관찰하였으며 관절형태를 알아볼 수 없을 정도로 손상된 것을 확인하였다. 반면 CTL80과 CTL10에서는 관절강 세포의 형태가 정상군과 비슷한 둥근모양을 띤 양상을 보였으며 연골조직의 형태가 잘 유지되어 Control 군에 비해 꾸지뽕잎의 투여효과가 나타났음을 관찰하였다. 이상의 결과를 통하여 꾸지뽕 잎 에탄올 추출물은 높은 항관절염 효과가 있을 것으로 사료되며, 항관절염 효능을 지니는 기능성 소재로써 개발 가능성을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.