The management of giant cell tumor involving juxta-articular portion has always been a difficult problem. In certain some giant cell tumors with bony destruction, a wide segmental resection may be needed for preventing to recur. But a main problem is preserving of bony continuity in bony defect as well as preservation of joint function. The traditional bone grafts have high incidence in recurrence rate, delayed union, bony resorption, stress fracture despite long immobilization and stiffness of adjuscent joint. We have attemped to overcome these problems by using a microvascular technique to transfer the fibula with peroneal vascular pedicle as a living bone graft. From Apr. 1984 to Nov. 1990, we performed the reconstruction of wide bone defect after segmental resection of giant cell tumor in 4 cases, using Vascularized Fibular Graft, which occur at the distal radius in 3 cases and at the proximal tibia in 1 case. An average follow-up was 2 years 8 months, average bone defect after wide segmental resection of lesion was 11.4cm. These all cases revealed good bony union in average 6.5months, and we got the wide range of motion of adjacent joint without recurrence and serious complications.
본 연구에서는 일방향 생분해성 유리섬유(BGF)와 친환경 생분해성 수지인 폴리락트산(PLA)을 이용하여 골절치료용 복합재료 고정판을 제작하고 체액 노출에 따른 고정판의 성능 변화를 확인하고자 $50.0^{\circ}C$ 온도조건으로 설정된 인산완충식염수(PBS)에 제작된 생분해성 고정판을 0~3주 동안 노출시켜 질량 변화를 측정하고 4점 굽힘 실험을 수행하였다. 굽힘 강성, 수분 흡수율, 그리고 질량 감소율과 같은 기계적 특성 변화를 파악하였으며 실험 결과로부터 노출 기간이 증가함에 따라 고정판을 구성하고 있는 생분해성 재료들의 손실로 인해 기계적 물성이 서서히 저하되는 경향을 보이는 것을 확인하였다.
This report presents the case of a 14-year-old male with rheumatoid arthritis (RA) in both temporomandibular joints (TMJs), in whom a bone scan and laboratory tests were used to confirm the diagnosis. The patient visited the Department of Orofacial Pain and Oral Medicine at the affiliation hospital with a complaint of a 1-year history of bilateral TMJ pain and sound. Clinical examination revealed bilateral TMJ and masseter muscle pain during mouth opening and palpation. Radiological examination revealed no significant morphological changes in either TMJ. The patient was prescribed medications at the first visit to address the pain, inflammation, and stiffness. A bone scan and laboratory tests were planned/scheduled for differential diagnosis between simple arthralgia and osteoarthritis. The bone scan revealed increased radiotracer uptake in both TMJs. The laboratory tests revealed a RA factor of 82.4 IU/mL, which is more than four times the normal range. The final diagnoses were bilateral TMJ early rheumatoid arthritis (ERA) and juvenile idiopathic arthritis. We created a stabilization splint and referred the patient to the Department of Rheumatology for further evaluation of the ERA. After fitting of the stabilization splint and giving instructions regarding its use, the patient has been receiving monthly follow-up checks for symptoms and undergoes follow-up blood tests every 3 months. About 14 months after the initial visit, the pain had significantly decreased from a Visual Analog Scale score of 5 to 1, and the RA factor decreased to 66.6 IU/mL. A regular follow-up check will continue until the end of growth.
We can sec the case of hand injury patient in the industry field. Hand injury has more particularity than other injury cases. Because it is densely a lot of muscle, tendon, bone, vessels, and in progressing speedily to fibrosis, adhesion, stiffness than other joints. If it has baud injury, it is important to the physical therapy in early stage after operation. Otherwise, it is difficult to recover the function. Hand malfunction intimately has to do with the return to work and the grade of disability. There are many different hand injury cases but, we want to investigate several cases. : fracture. joint injury, tendon injury, and want to looking for treatment tine and method about these. So, we'll understand hand injury of industry disaster. and acknowledge of the importance of physical therapy in the early stage through these.
Journal of mucopolysaccharidosis and rare diseases
/
제2권1호
/
pp.31-31
/
2016
Purpose: To describle clinical features and enzyme activity of Vietnamese patients with Mucolipidosis type II. Methods: Clinical features, laboratory and plasma lysosom enzyme activity by 4 MU-Fluorometric assay was studied from 2014-2015 at the Northern referral center of Pediatrics - National Children's Hospital. Results: 16 cases (7 girls and 9 boys) were diagnosed with I-cell bases on clinical symptoms and enzyme activities studies. Diagnosis age was $5.93{\pm}4.28$ years, onset age was recognised from birth to 4 years (median 1.25) with the feature of joint stiffness and bone deformation. All cases presented with the feature of joint stiffness, chest deformation and kyphoscoliosis; Fifteen cases (93.7%) had coarse facial features. No patients had hepatosplenomegaly on abdominal ultrasound, 5/15 patients had heart valves disease. Enzyme assay showed ${\alpha}$-Hexosaminidase of $1,885.9{\pm}338.7$ (nmol/mg plasma/17 hrs), ${\alpha}$-Iduronate sulfatase of $4,534.8{\pm}1,062.9nmol/mg$ plasma/4 hrs). Conclusion: Mucolipidosis II seriously affected the life of the patients with skeletal deformities, contractures develop in all joints and cardiac involvement.
Ultra high performance concrete (UHPC) can be used in the UHPC-steel composite structures especially for bridge structures to achieve high stiffness and high fatigue resistance with low self-weight. The structural performances of UHPC-steel composite slabs subjected to hogging moment have a significant influence on the global stiffness and durability of UHPC-steel composite structures. In order to study the structural behaviors of non-steam-cured UHPC-steel composite slabs subjected to negative moment, five composite slabs combined the thin UHPC layers to steel plates via shear stud connecters with the diameter of 16mm were fabricated and tested under negative moment. The test program aimed to investigate the effect of stud spacing and longitudinal reinforcement ratios on the failure mode, load-deflection behaviors, cracking patterns, bond-slips, and carrying capacities of composite slabs subjected to negative moment. In addition, direct tensile tests for the dog-bone UHPC specimens with longitudinal reinforcement bars were carried out to study the effect of reinforcement bars on the tensile strength of UHPC in the thin structure members. Based on the experimental results, analytical models were also developed to predict the cracking load and ultimate load of UHPC-steel composite slabs subjected to negative moment.
Eun Ju Lee;Tae Kyung Kim;Chang Min Shin;Jong Cheol Seo;Seo Whi Kim;Si Yong Cho;Hyun Min Yoon;Cheol Hong Kim
Journal of Acupuncture Research
/
제41권1호
/
pp.69-73
/
2024
This study evaluated a case of trigeminal nerve stimulation during acupotomy at a site 5 pun left of GV16. The study participant was a 52-year-old male suffering from upper neck pain and numbness, which was managed by acupotomy at a site 5 pun left of GV16. During acupotomy, the patient experienced unexpected numbness and stiffness of the left zygomatic bone. This area corresponds to the distribution of the maxillary nerve, which is the second branch of the trigeminal nerve. After approximately one month, symptoms of numbness and stiffness disappeared without rendering medical treatment. These side effects are presumed to be associated with the trigeminocervical complex and stimulation of the trigeminal nucleus within the spinal cord. Thus, during the acupotomy of the upper neck, especially at GV16, the needles should be inserted slowly, and the patient's response should also be monitored.
The objectives of this work here focus on the differences in responses to multiple cyclic tests of different sections along the length of the same tendon. Tendon specimens were obtained from the hindlimbs of canines and frozen to -70$^{\circ}C$. After thawing, specimens were mounted in the immersion bath at room temperature (22$^{\circ}C$) , preloaded to 0.13 N and then subjected to 3% or 4% of the initial length at a strain rate of 5%/sec. It was found that different sections of the same long tendons had different resistances to deformation. In general, the bone end sections were stiffer and carried greater loads for a given strain than the muscle end sections, and the mid-portions were the least stiff and carried the smallest loads for a given strain. The results of this study offer new information about the mechanical responses of collagenous tissues. We know more about their responses to multiple cyclic extensions and how their responses are different from the positions along the length of the tendon specimen. The nature and causes of these differences in the stiffness are not fully known. However, it is clear that differences in the mechanical response of tendons and other connective tissues are significant to musculoskeletal performance.
Rots, Jan G.;Invernizzi, Stefano;Belletti, Beatrice
Computers and Concrete
/
제3권4호
/
pp.213-233
/
2006
Over the past years techniques for non-linear analysis have been enhanced significantly via improved solution procedures, extended finite element techniques and increased robustness of constitutive models. Nevertheless, problems remain, especially for real world structures of softening materials like concrete. The softening gives negative stiffness and risk of bifurcations due to multiple cracks that compete to survive. Incremental-iterative techniques have difficulties in selecting and handling the local peaks and snap-backs. In this contribution, an alternative method is proposed. The softening diagram of negative slope is replaced by a saw-tooth diagram of positive slopes. The incremental-iterative Newton method is replaced by a series of linear analyses using a special scaling technique with subsequent stiffness/strength reduction per critical element. It is shown that this event-by-event strategy is robust and reliable. First, the model is shown to be objective with respect to mesh refinement. Next, the example of a large-scale dog-bone specimen in direct tension is analyzed using an isotropic version of the saw-tooth model. The model is capable of automatically providing the snap-back response. Subsequently, the saw-tooth model is extended to include anisotropy for fixed crack directions to accommodate both tensile cracking and compression strut action for reinforced concrete. Three different reinforced concrete structures are analyzed, a tension-pull specimen, a slender beam and a slab. In all cases, the model naturally provides the local peaks and snap-backs associated with the subsequent development of primary cracks starting from the rebar. The secant saw-tooth stiffness is always positive and the analysis always 'converges'. Bifurcations are prevented due to the scaling technique.
The purpose of this study was to describe the application of 3D finite element analysis to determine resultant stresses on the bone anchored fixed prosthesis, implants and supporting bone of the mandible according to fixture numbers and load conditions. 4 or 6 fixtures and the bone anchored fixed prosthesis were placed in 3D finite element mandibular arch model which represents an actual mandibular skull. A $45^{\circ}$ diagonal load of 10㎏ was labiolingually applied in the center of the prosthesis(P1). A $45^{\circ}$ diagonal load of 20㎏ was buccolingually applied at the location of the 10mm or 20mm cantilever posterior to the most distal implant(P2 or P3). The vertical distribution loads were applied to the superior surfaces of both the right and the left 20mm cantilevers(P4). In order that the boundary conditions of the structure were located to the mandibular ramus and angle, the distal bone plane was to totally fixed to prevent rigid body motion of the entire model. 3D finite element analysis was perfomed for stress distribution and deflection on implants and supporting bone using commercial software(ABAQUS program. for Sun-SPARC Workstation. The results were as follows : 1. In all conditions of load, the hightest tensile stresses were observed at the metal lates of prostheses. 2. The higher tensile stresses were observed at the diagonal loads rather than the vertical loads 3. 6-implants cases were more stable than 4-implants cases for decreasing bending and torque under diagonal load on the anterior of prosthesis. 4. From a biomechanical perspective, high stress developed at the metal plate of cantilever-to-the most distal implant junctions as a consequence of loads applied to the cantilever extension. 5. Under diagonal load on cantilever extension, the 6-implants cases had a tendency to reduce displacement and to increase the reaction force of supporting point due to increasing the bendign stiffness of the prosthesis than 4-implants cases. 6. Under diagonal load on cantilever extension, the case of 10mm long cantilever was more stable than that of 20mm long cnatilever in respect of stress distribution and displacement. 7. When the ends of 10mm or 20mm long cantilever were loaded, the higher tensile stress was observed at the second most distal implant rather than the first most distal implant. 8. The 6-implants cases were more favorable about prevention of screw loosening under repeated loadings because 6-implants cases had smaller deformation and 4-implants cases had larger deformation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.