• Journal of radiological science and technology
• /
• v.43 no.3
• /
• pp.187-194
• /
• 2020

Bone mineral density is a examination to measure the amount of bone in patients with metabolic bone disease. It is a low dose, but may cause unnecessary exposure to the gonads and other organs located in the periphery when examining the lumbar and proximal femurs. Therefore, the purpose of this study was to evaluated the exposure dose for each organ exposed during the bone mineral density through simulation, and analyzed the applicability of the subject to radiation shielding devices using 3D printing materials. As a result, the highest dose was shown at 11.47 uSv in the breast during lumbar examination and 8.98 uSv in the testis during proximal femur examination. Also, the farther away from the examination site, the lower the effect of the scattering-ray. The shielding effect of using 3D printing shielding device showed high results in proportion to the effective atomic number and specific gravity of the printing material. Among the printing materials, ABS + W showed an effect of at least 78.72 to 96.3 9% compared to the existing lead material.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.20 no.3
• /
• pp.230-238
• /
• 2013

Purpose: This study was done to identify the relationship among bone mineral density (BMD), body composition and osteoporosis self-efficacy and to identify predictors of BMD in female nursing students. Method: Participants were 154 nursing students. Osteoporosis self-efficacy was determined by a self-report questionnaire. BMD was measured by ultrasound bone densitometry and body composition by a body composition analyzer. Data were collected between April 1 and 27, 2013 and analyzed using descriptive statistics, ANOVA, Scheff$\acute{e}$ test, Pearson correlation coefficient, and multiple regression with SPSS 18.0. Results: Mean BMD at the calcaneus site was $0.58{\pm}1.31$ (T-score). Incidence of osteopenia was 11.7%. Percentage of body fat (PBF)-defined obesity had higher prevalence than body mass index (BMI)-defined obesity. BMD had significant positive correlations with skeletal muscle mass (r=.226, p=.005) and fat free mass (r=.225, p=.005). The factor predicting BMD was skeletal muscle mass with 4.7% of explained variance. Conclusion: Study results indicate that of body composition components, skeletal muscle mass is the prime predicting factor for BMD. Thus to promote healthy bones, it is important to strengthen the muscles using a program, based on balanced development of all muscles.

• Clinical and Experimental Pediatrics
• /
• v.53 no.3
• /
• pp.286-293
• /
• 2010

Peak bone mass is established predominately during childhood and adolescence. It is an important determinant of future resistance to osteoporosis and fractures to gain bone mass during growth. The issue of low bone density in children and adolescents has recently attracted much attention and the use of pediatric dual-energy X-ray absorptiometry (DXA) is increasing. The process of interpretation of pediatric DXA results is different from that of adults because normal bone mineral density (BMD) of children varies by age, body size, pubertal stage, skeletal maturation, sex, and ethnicity. Thus, an appropriate normal BMD Z-score reference value with Z-score should be used to detect and manage low BMD. Z-scores below -2.0 are generally considered a low BMD to pediatrician even though diagnoses of osteoporosis in children and adolescents are usually only made in the presence of at least one fragility fracture. This article will review the basic knowledge and practical guidelines on pediatric DXA based on the International Society for Clinical Densitometry (ISCD) Pediatric Official Positions. Also discussed are the characteristics of normal Korean children and adolescents with respect to BMD development. The objective of this review is to help pediatricians to understand when DXA will be useful and how to interpret pediatric DXA reports in the clinical practice for management of children with the potential to develop osteoporosis in adulthood.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.527-534
• /
• 2016

Dual-energy X-ray absorptiometry (DEXA) is the most widely used technical instrument for evaluating bone mineral content (BMC) and density (BMD) in patients of all ages. In 2016, DEXA devices operating is 5617 in Korea. In this study we investigated the quality of management practices survey for DEXA equipment and we analyzed it. We got a survey response rate of 12.6%. Accurate bone densitometry test is used data for estimation a patient's risk of fracture. However, improper bone densitometry will increase the possibility of causing a false positive. Therefore. it is essential to use the proper aids accurate bone densitomenty to be performed, and the quality control of the device to reduce the error factor of the tester through the training to reduce error for the device and the attitude.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.721-728
• /
• 2019

The purpose of this study was to evaluate the relationship between bone mineral density (BMD) and body composition (BC) or backmuscle strength (BS). Sixty-one participants were measured by BMD using ultrasound bone densitometry and Inbody for BC (i.e., SLM=Soft lean mass, SMM=Skeletal muscle mass, FS=Fitness score. et al.), BS after self-questionnaire for life cycle. This study was performed after approving Institutional Review Board and obtaining the informed concent from all participants. Participants was divided into two group by BMD T-score; $T-score{\geq}-1.0$, T-score<-1.0. Statistical analysis was performed by using SPSS ver. 22.0(USA), Spearma test for correlation between BMD and BC or BS. BMD or SLM, BS was increased with increasing physical activity or body mass index. SMM or SMM, FS of BMD $T-score{\geq}-1.0$ group was higher than that of T-score <-1.0 group as well as BS(p>0.05). BMD T-score was correlated positively with SLM(r= 0.424) or SMM(r= 0.431) in men, as well as in women(p<0.05). BS was correlated positively with SLM or SMM, FS. BS was significantly positive correlated with BMD in women group (r= 0.591, p= 0.001), but not in men group. We concluded that BMD is the relationship with SLM or SMM, as well as BS in women.

• Journal of Bone Metabolism
• /
• v.25 no.4
• /
• pp.235-241
• /
• 2018

Background: Procollagen type I N-terminal propeptide (PINP) is one of the most clinically useful bone formation biomarkers. Therefore, the purpose of this study was to independently evaluate the performance of automated total PINP assay and established age- and gender- specific reference intervals for PINP in healthy Korean population. Methods: The imprecision, linearity, and detection capability of Elecsys total PINP assay was determined and reference interval was established using 599 serums from Korean population with normal bone mineral densities based on bone densitometry. Age groups were divided into 20s, 30s, 40s, 50s, 60s and over. Results: Elecsys total PINP had excellent performance in imprecision, linearity, and detection capability. When partitioning age groups in Korean male and female populations, there was significant difference in total PINP between different age groups. In male populations, PINP level was decreased with increasing age, then it remained steady after middle-age. In female populations, there was a decreasing tendency similar to that in the male population with a sharp increase in the 50 to 59 age group. Conclusions: Elecsys total PINP assay showed precise and reliable performance in our study. We established age-related PINP reference intervals for Korean male and female population with normal bone mineral densities.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.241-250
• /
• 2008

The interest in male osteoporosis is increasing as the incidence of osteoporotic fractures has increased not only in female but also in male due to the increase of old age population thanks to the development of medical science and science in general. Therefore, this study is to find factors related to bone mineral density of male older than 40 years old, to investigate the incidence of the male osteoporosis and to provide a basic result for prevention and medical treatment for the male osteoporosis. The incidence of the osteopenia and the osteoporosis at L-spine was 45% and 12.9% respectively and the incidence of them at femur was 51.9% and 7.63% respectively, among male older than 40 years old who took a medical examination. It was higher than the existing study results conducted to male older than 50 years old in USA and Europe. The incidence of them at both of L-spine and femur showed a significant difference depending the age groups. As the age increases, the average bone mineral density decreases at both of L-spine and femur. And as the weight increases and the body mass index is higher, the incidence of the osteoporosis decreases. There was no significant relation with the incidence of the osteoporosis depending on the exercise, the smoking and the drinking, but the number of exercise, smoking and drinking changes the quantity of bone and are factors influencing the bone mineral density of male person.

• The Journal of Pediatrics of Korean Medicine
• /
• v.19 no.1
• /
• pp.53-66
• /
• 2005

Objectives : Osteoporosis is generally occurred in old age, especially postmenopausal women therefore, it is relatively overlook osteoporosis in children, but the authors have paid attention to bone density in children because maximizing peak bone mass of childhood is advocated as a way to prevent osteoporosis and environmental factor of childhood play role in the regulation of bone density. the present study was performed to measure bone density of children and to assess the influence of age, sex, body size, exercise, weak symptoms on bone density during the period of bone growth. Methods : We have measured bone density of calcaneus bone in 283 children (male 144 female 139, ranged from3 to 18) who visited in growth clinic of Pediatrics, Dongguk University Bundang Oriental Hospital, using quantitative ultra sound densitometry and they were divided into 3 groups by age(3-10, 11-15, 15-18 years). Pearson's correlation was used to assessed the influence of age, body size and Student's t-test was used to detect differences in sex, exercise, weak symptoms between the groups on bone density Results : The bone density correlated with age, height, weight, body mass index in this study. Bone density were significantly higher in males than in female. Digestive weak children's bone density were lower than normal children. Conclusion : Weight-bearing exercise and food rich in nutrition are necessary to increase maximizing peak bone mass in children.

• Journal of Radiation Industry
• /
• v.11 no.1
• /
• pp.27-31
• /
• 2017

Reliable follow-up of bone mineral density (BMD) by dual energy X-ray absorptiometry (DXA) is essential in clinical practice. When there is a difference in the BMD values from DXA systems in the same patient, cross calibration equation is required for the reliable follow-up. Unfortunately, no equation is existed in BMD measure between GE Lunar Prodigy Advance (US, GE Healthcare; LPA) and Osteosys Dexxum T (Korea, Osteosys; ODT) DXA systems. In this study, we evaluate the agreement of BMD values between LPA and ODT and suggest the cross calibration equation using European spine phantom (ESP) with two systems. We performed BMD measurements using ten scans with ESP in each DXA systems. We compared BMD values and calculated cross calibration equation by linear regression analysis. The comparison between the LPA and ODT bone densitometers used the ESP. Compared to the ESP BMD values, ODT underestimated 14.36% and LPA overestimated 12.96%. The average of total BMD measurement values acquired with ODT were 21.44% lower than those from LPA. Cross-calibration equation for LPA and ODT was derived from ESP. We calculated simple cross calibration equation for LPA and ODT DXA systems. Cross-calibration equation is necessary for the reliable follow-up of BMD values in two different systems.

• Journal of Korean Neurosurgical Society
• /
• v.53 no.1
• /
• pp.26-30
• /
• 2013

Objective : The purpose of this study was to compare the results of three types of short segment screw fixation for thoracolumbar burst fracture accompanying osteopenia. Methods : The records of 70 patients who underwent short segment screw fixation for a thoracolumbar burst fracture accompanying osteopenia (-2.5< mean T score by bone mineral densitometry <-1.0) from January 2005 to January 2008 were reviewed. Patients were divided into three groups based on whether or not bone fusion and bone cement augmentation procedure 1) Group I (n=26) : short segment fixation with posterolateral bone fusion; 2) Group II (n=23) : bone cement augmented short segment fixation with posterolateral bone fusion; 3) Group III (n=21) : bone cement augmented, short segment percutaneous screw fixation without bone fusion. Clinical outcomes were assessed using a visual analogue scale and modified MacNab's criteria. Radiological findings, including kyphotic angle and vertebral height, and procedure-related complications, such as screw loosening or pull-out, were analyzed. Results : No significant difference in radiographic or clinical outcomes was noted between patients managed using the three different techniques at last follow up. However, Group I showed more correction loss of kyphotic deformities and vertebral height loss at final follow-up, and Group I had higher screw loosening and implant failure rates than Group II or III. Conclusion : Bone cement augmented procedure can be an efficient and safe surgical techniques in terms of achieving better outcomes with minimal complications for thoracolumbar burst fracture accompanying osteopenia.