• 대한화학회지
• /
• 제39권11호
• /
• pp.837-841
• /
• 1995

사염화탄소 속에서 티오프로피온아미드(TPA)와 triethylphosphine oxide(TEPO), triethylphosphine oxide(TPPO), trimethylphosphate(TMP), 그리고 tributyl phosphate(TBP)간의 수소 결합에 대한 열역학적 상수들을 근적외선 분광법을 이용하여 구하였다. TPA의 .nu./.alpha./+amide 2 조합띠는 TPA 단위체 및 수소 결합을 이룬 TPA의 띠로 이루어져 있음이 확인되어 이 띠를 두 개의 Lorentzian-Gaussian 곱함수의 띠로 분해하였다. 온도 및 농도의 변화에 따른 이 조합띠의 변화기로부터 TPA와 TEPO, TPPO, TMP, TBP의 수소 결합 엔탈피는 각각 -21.4, -16.8, -12.8, -12.9kJ/mol이었다. 이 결과는 치환기의 inductive effect 및 steric effect로 설명할 수 있다.

• Elastomers and Composites
• /
• 제49권2호
• /
• pp.134-143
• /
• 2014

자가치유형 아스팔트를 구현하기 위하여 분자간결합력이 큰 고분자를 아스팔트에 투입시켰다. 사용된 고분자는 셜린, 나일론 및 폴리에스터이다. 이 고분자들은 가공온도가 $200^{\circ}C$를 넘어 고체상태로는 투입이 어려워 용액상태로 첨가하였다. 고분자가 첨가된 아스팔트들은 우수한 개질효과와 치유효과를 나타내었다. 인장강도에서 고분자개질아스팔트들은 고분자가 5% 투입되었으나 강도는 18%이상 증가하였다. 고분자와 아스팔트분자 간에 상호작용이 있는 것으로 보인다. 특히 셜린과의 분자간결합력이 가장 큰 것으로 보인다. 셜린은 아스팔트와 수소결합 및 아스팔트내에 존재하는 금속들과 이온결합을 할 것이다. 치유성에 있어서는 인장강도 면에서 셜린이 가장 높은 138%의 치유능을 나타내었으며 복합모듈러스 면에서는 폴리에스터가 141%의 치유능을, 충격강도 면에서는 나일론이 131%의 치유능을 보였다. 이는 치유능 해석에서 고분자의 분자간결합력도 중요 사항이지만 고분자와 아스팔트간의 상호작용 또한 중요한 고려 사항이 되어야함을 의미한다.

• 한국산림과학회지
• /
• 제63권1호
• /
• pp.12-20
• /
• 1984

본(本) 연구(硏究)는 국산낙엽송재(國産落葉松材)를 이용(利用)한 압체온도(壓締温度)와 시간(時間)에 따른 파티클보오드의 특성(特性)들을 조사(調査)하였다. 결론(結論)을 요약(要約)하면 다음과 같다. 1) 길이와 두께의 비율(比率)이 1:1~35인 비교적(比較的) 불리(不利)한 조건하(條件下)의 chip임에도 불구하고 chip의 표면(表面)이 비교적(比較的) 매끈하게 접착제(接着劑)의 도포(塗布)가 고르게 되고, 공시재(供試材)의 좋은 접착특성(接着特性)이 물리적(物理的) 성질(性質)에 좋은 영향(影響)을 주었다. 2) MOR, MOE, SHA에서 압체시간(壓締時間)이 10분(分)일 때 더욱 좋은 기계적(機械的) 특성(特性)을 보여주고 있다. 3) MOR, IBS, SHA에서 압체시간(壓締時間)이 20분(分)인 경우에 온도(温度)에 따른 그 유의성(有意性)이 인정(認定)되지 않았다. 이는 공시재(供試材)의 노화작용(老化作用)과 수지(樹脂)의 연화작용(軟化作用)이 상호작용(相互作用)하여 일어나는 현상(現狀)으로 보인다. 4) 박리저항(剝離抵抗)에서 압체시간(壓締時間)이 10분(分)일 때 온도(温度)에 따른 내부저항(內部低抗) 값이 증가(增加)되고 있는 것은 중층(中層)에 수지(樹脂)의 적정(適定) 경화온도(硬化温度)가 형성(形成)되는 시간(時間) 때문이다. 5) 흡수(吸水) 팽창(膨脹)에서 압체온도(壓締温度)와 압체시간(壓締時間)에 큰 영향(影響)을 주는데, 이는 열처리(熱處理) 효과(效果)에 따른 공시재(供試材)의 흡수성(吸水性), 이방성(異方性), 불균일성(不均一性) 등(等)이 감소(減)少되어 치수 안전성(安定性)을 유지(維持)시키는데 큰 역할(役割)을 하기 때문이다. 따라서 압체시간(壓締時間)과 압체온도(壓締温度)가 증가(增加)할수록 보다 좋은 치수 안전성(安定性)을 보여 준다.

• Archives of Pharmacal Research
• /
• 제7권1호
• /
• pp.1-9
• /
• 1984

Polyethylene glycol 20, 000 and 6, 000 were found to have an upper consolute temperature, called "cloud point", and the effects of various additives on the polythylene glycols were investigated in this study. Electrolytes lowered the cloud point in proportion to their concentrations through dehydration and electrostriction. It was found that anions played a more important role than cations and the effects of both the cations and the anions clearly followed the classical Hofmeister series. However, the Schultze Hardy rule holds for the effect of anions, and fails for the effect of cations. Salts of large polarizable anions such as iodide and thiocynate rather raised the cloud point, and their effects were ascribed to the fact that they break the water structure and weaken hydrophobic bonding of the polyxyethylene moiety. Nitrates of polyvalent cations also raised the cloud point. This was ascribed to the complex formation between the polyvalent cations and ether oxygens of the polyoxyethylenes. This explained the failure 'of the Schultz-Hardy rule for cations. Uncharged aromatic compounds drastically lowered the clound point, while aliphatic alcohols slightly lowered the cloud point, This result suggests that there might be some interaction between ether oxygens and aromatic nucleus.c nucleus.

• 한국세라믹학회지
• /
• 제47권3호
• /
• pp.262-267
• /
• 2010

a-SiC has been thought as an ideal candidate for conventional silicon at many applications. However, the uniformity problem of deposition has been a obstacle for conventional use of a-SiC:H films. a-SiC:H films were deposited on (100) silicon wafer by RPECVD system in various temperature. HMDS and $H_2$ gas were used as a precursor and a carrier gas, respectively. The flow rate of HMDS source and $C_2H_2$ dilution gas was fixed in order to study the carbon effect on the film stoichiometric and bonding properties. The plasma power varied from 200 to 400W. We used three types of source delivery line to control the uniformity and film properties of deposited film. We showed that the change of source delivery line has effect on the film uniformity of deposited film and this change of line did not affect on film properties. Also, the change of deposition conditions has effect on the film uniformity.

• 한국주조공학회지
• /
• 제12권4호
• /
• pp.335-345
• /
• 1992

Aluminum alloy matrix composites reinforced with various amounts of SiC particles have been produced by rheo-compocasting followed by hot extrusion. A relatively uniform distribution of SiC particles in the composites was obtained. The amounts of pore and SiC particles cluster were relatively small in the composites. Particle free zones were observed in the hot extruded composites when the amount of SiC particles was less than 20 vol%. However, the width of particle free zone decreases with the increase of SiC particle content. Eutectic Si phase play an important role for improving bonding between SiC particle and matrix. Tensile and yield strength increased with the increase of SiC particle content. the strenthening effect of SiC particle addition was effective even at relatively high temperature of 573 K.

• 연구논문집
• /
• 통권34호
• /
• pp.131-138
• /
• 2004

Porous silicon nitride ceramics were prepared by Self-propagating High Temperature Synthesis from silicon powder, silicon nitride powder and the pore-forming precursor. The microstructure, porosity and the flexural strength of the porous silicon nitride ceramics were varied according to the Si/$Si_3N_4$ ratio, size and amount of the pore-forming precursors. Some samples exhibited as high flexural strength as $162\pm24$ MPa. The high strength is considered to result from the fine pore size and the strong bonding among the silicon nitrid particles.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.555-560
• /
• 2002

Brazing of Al to Cu using AI-Si-Mg-Bi brazing alloy has been carried out in the vacuum furnace. In the bonded interlayer, there were two kinds of intermetallic compounds. One of these intermetallic compounds was e phase and the other was b phase. The growth of b phase was controlled by diffusion Al into Cu. Deformation behavior of Al-Cu brazing joint was brittle without deformation of the base metal. Shear strength of the joint was only about 20MPa. The shear specimen broken in the intermetallic compound, which was mainly e phase. Shear strength did not depend on the bonding temperature.

• Transactions on Electrical and Electronic Materials
• /
• 제8권3호
• /
• pp.125-130
• /
• 2007

DLC coating on ceramics is very useful for manufacturing the materials with hardness and low friction. Adhesion of DLC thin film on ceramics, on the other hand, is usually very weak. Adhesion of DLC film depends on many parameters such as contamination and chemical bonding between thin film and substrate. In this study, adhesion of DLC film on ceramics was improved by the intermediate layer when the plasma immersion ion deposition (PIID) technique was applied. It is found that the chemical composition and the thickness of intermediate layer have significantly an effect on the adhesion of DLC thin film on $Al_2O_3$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.290-290
• /
• 2011

In this study Diamond-like carbon (DLC) films were deposited on p-type Si substrates using a Radio-Frequency magnetron Sputtering system. The DLC film was deposited by bombarding graphite target with a N2/Ar plasma mixture with various conditions: substrate, pressure, deposition time, temperature of substrate, power and ratio of gas mixture. The effect on the conduction and hardness of DLC thin films were investigated. The conduction of DLC films were measured by I-V measurement. In addition, Raman analysis was performed to study the chemical bonding structure. The hardness was measured by Nano indentation. Atomic Force Microscopy was used for determined surface morphology of DLC film.