• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.636-643
• /
• 1999

Green-emission intensity of a $Zn_{2-x}Mn_xSiO_4$ phosphor, which is a potential candidate as a green component in PDP device, significantly increases provided that the compound is additionally heat treated at 900$^{\circ}C$ after solid state reaction at 1300$^{\circ}C$. In order to verify origin of such an intensity enhancement after the additional heat treatment in association with the electronic and local structural change at around Mn ions, the Mn K-edge X-ray absorption spectra were recorded. From the analyses of the preedge peak corresponding to $1s{\rightarrow}3d$ bound state transition and XANES spectrum, it is known that most Mn ions are in +2 oxidation state and substitute Zn ion site regardless of the thermal treatment. In addition, EXAFS analyses revealed that Mn ions formed $MnO_4$ tetrahedra with the Mn-O bond length shortened by 0.01${\AA}$ and with reduced Debye-Waller factor in the thermally treated sample.

• Journal of the HCI Society of Korea
• /
• v.3 no.1
• /
• pp.33-38
• /
• 2008

The major users of children's library are children and housewives. Recent increasing frequency of their visit to the library expands the function of it from the place where they borrow and read books further to the cultural space where each family unit can enjoy leisure activities. Though the children's library basically is a quiet place for reading books, peers' establishing friendship and emotional bond with the parents, and such plays as small scale muscular movements take place in addition to reading activities because the major users are infants under six or children in the lower grades in elementary school. Thus, in order to study the features and requirements that are inherent in the various behaviors of the children who use furniture, understanding of the particular factors in the physical environment of the children's library and the user context must precede. In reality, though the fixed form of the desks and chairs in the library was made by a small number of designers, a large number of children are using them in tremendously various ways beyond the ways that the designers had intended, adapting themselves to the environmental context. Therefore, the purpose of this study is to find out the children's using way of seats when they do reading and playing activities based on the way of interaction between children and parents, and, after modeling of the children's behavior data, to understand the demands inherent inside the various behaviors of children who use furniture.

• Journal of Global Scholars of Marketing Science
• /
• v.15 no.3
• /
• pp.211-231
• /
• 2005

It is important for marketers to understand both individual resistance and group resistance in order to successfully bring innovations into global markets. We suggest that consumers resist innovations as individuals and as members of a group and that they do this in different ways at different stages of decision-making. The individual resistance begins with forms of initial resistance, develops into emergent resistance and mature or belated resistance at the individual level. In addition, personal moral standards can influence decision making in relation to the adoption of innovations. Individual resistance is sometimes accompanied by or evolves into group resistance. We introduce a framework for thinking about consumer resistance to innovations that sees it as a consequence of social identity, which has functions for the individual, the group to which one belongs, and other individuals and groups. Consumers with membership in a certain group try to increase their self-esteem through the process of social comparison. The more consumers strongly identify with and bond with a certain group, the more in-group solidarity and out-group hostility will occur. Out-group hostility gives group members strong resistance toward products and services related to the out-group. Individual resistance and group resistance are threats to marketers and dampen performance. By considering the existence of resistance to innovations and seeking strategies to overcome it, marketers can transform these threat into new opportunities. A better understanding of consumer resistance can complement research on the adoption of innovations and help in the development of a universal model of consumer behavior.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.4 s.111
• /
• pp.129-142
• /
• 2005

Korea's pet-related society has been fast growing without the base and preparations of socio-cultural animal welfare. For the most part, Korea's current public parks, in particular, have a space structure in which a lot of friction between the general public who are not fond of dogs and dog owners in public places has been happening unavoidably. A lot of countries that are taking a lead role in animal welfare have built dog parte that the general public and dogs can enjoy together. This research starts with the realization that the concept of 'dog park' needs to be introduced in Korea as more and more Koreans own dogs and other pets. This research aims to provide guidance for dog park planning by drawing a dog park planning model and to promote basics for co-existence of dogs and people in a park and set in place animal welfare early and raise the level of awareness. Total 7 types of dog put 56 planning items including dog zone, dog playground, and agility, and a selective matrix by which it is possible to select essential recommendatory optional items by each type of dog park were drawn in this research. Overall there were the highest needs in separated area for dogs in park. A dog park planning model is designed as follows. 1) To select a dog park type that was introduced. 2) To set up facilities applicable in common and planning items desired in advance by each type. 3) To zone dog park areas by the priority order of planning items that were introduced and to position necessary facilities. 4) To plan program that should be were introduced. A dog park was expected to take some positive roles such as providing opportunities to socialize dogs, activating social communities, more effective park management by participating local community members and so on.

• Journal of the Korean Chemical Society
• /
• v.21 no.5
• /
• pp.330-338
• /
• 1977

In order to elucidate the plastic deformation of solids, the following assumptions were made: (1) the plastic deformation of solids is classified into two main types, the one which is caused by dislocation movement and the other caused by grain boundary movement, each movement being restricted on a different shear surface, (2) the dislocation movement is expressed by a mechanical model of a parallel connection of various kinds of Maxwell dislocation flow units whereas the grain boundary movement is also expressed by a parallel connection of various kinds of Maxwell grain boundary flow units; the parallel connection in each type of movements indicates that all the flow units on each shear surface flow with the same shear rate, (3) the latter model for grain boundary movement is connected in series to the former for dislocation movement, this means physically that the applied stress distributes homogeneously in the flow system while the total strain rate distributes heterogeneously on the two types of shear planes (dislocation or grain boundary shear plane), (4) the movement of dislocation flow units and grain boundary units becomes possible when the atoms or molecules near the obstacles, which hinder the movement of flow units, diffuse away from the obstacles.Using the above assumptions in conjunction with the theory of rate processes, generalized equations of shear stress and shear rate for plastic deformation were derived. In this paper, four cases important in practice were considered.ted N${\cdot}{\cdot}{\cdot}$O hydrogen bond and the second of two normal N${\cdot}{\cdot}{\cdot}$O hydrogen bonds, both of which exist between the amino group and the perchlorate, groups. A p-phenylenediamine group is approximately planar within an experimental error and bonded to twelve perchlorates: ten perchlorates forming hydrogen bonds and two being contacted with the van der Waals forces. A perchlorate group is surrounded by six p-phenylenediamines and four perchlorates; among the six p-phenylenediamines, five of them are hydrogen-bonded, and the rest contacted with the van der Waals force.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.3
• /
• pp.225-234
• /
• 1992

Thermal decomposition was conducted to investigate the influence of the various factors on stability of a new insecticide, [O, O-Diethyl O-(1-phenyl-3-trifluoromethyl-5-pyrazoyl) thiophosphoric acid ester : KH-502], in view of those informations applicable for industrial exploitation. In the thermal decomposition experiment, KH-502 was, after mixing with Fe, Cu and adjustment of moisture and pH conditions, subjected to three temperatures, 25, 50, and $100^{\circ}C$. Results for stability, and degradation pattern of KH-502 from the above experiment can be summarized as follows: 1. Main products of the thermal decomposition when this was conducted in the closed system were identified as following five compounds:O, O, O-Triethylthiophosphoric acid(TEPA), 1-Phenyl-3-trifluoromethyl-5-ethoxypyrazole(PTMEP), 1-Phenyl-2-ethyl-3-trifluoromethyl-5-hydroxypyrazole(PETMHP), O, O-Diethyl O-(1-phenyl-3-trifluoromethyl-5-pyrazoyl)phosphoric acid ester(KH-502 oxo form), O, S-Diethyl O-(1-phenyl-3-trifluoromethyl-5-pyrazoyl)phospho rothiolate(S-ethyl KH-502). However, compounds such as oxo form and S-ethyl KH-502 were not identified when the thermal decomposition was proceeded in the open system. 2. KH-502 was stable at 25 and 50$^{\circ}C$, but it was decomposed at 100$^{\circ}C$ following the first-order kinetics at the early stages of decomposition. 3. Rate constants for the thermal decomposition of KH-502 at 100$^{\circ}C$ were in the orders of Cu powder addition 0.344>Cu plate addition 0.21>moisture addition 0.05>closed system=open system=iron addition=pH 5.5 adjustment 0.04>pH 8.5 adjustment 0.027 day$^{-1}$, representing KH-502 was decomposed fast at Cu powder treatment and slow at pH 8.5 adjustment. 4. Half-life for the thermal decomposition of KH-502 at 100$^{\circ}C$ was in the orders of Cu powder addition 2.02

• Korean Journal of Social Welfare
• /
• v.65 no.3
• /
• pp.239-263
• /
• 2013

This research was carried out in order to develop and validate the Korean Version of Working Relationship Scale for Mentally Disabled Persons, which measures the working relationship between a mentally disabled person and his or her case manager. The first step taken to develop this scale was to construct sample items for the Working Relationship Scale using literature research and three focus group interviews of mentally disabled persons who use local mental health services. Secondly, mentally disabled people were surveyed with these sample items and two professors from the department of social work who specialize in mental health social work and two licensed mental health social workers working in the community mental health field reviewed these sample items to select and compile a final version of the scale. Lastly, the scale's reliability and validity was verified through an empirical study of 569 mentally disabled persons who surveyed the final selection of items. An explanatory factor analysis showed that the sample items can be grouped into three factors. Factor 1 is 'Professional Contribution Factor,' which is related to the professional practice of the case manager; Factor 2 is 'Negative Working Relationship Factor'; and Factor 3 is 'Emotional Bond Factor,' which measures the intimacy between the case manager and the mentally disabled person. A confirmatory analysis of the three-factor format that was discovered in the explanatory factor analysis was carried out with the rest of the randomly divided data, which showed that the model demonstrated a goodness-of-fit. The convergence validity between similar concepts appeared to be appropriate as well. Based on these results, the Korean Version of Working Relationship Scale for Mentally Disabled Persons consisting of a final 33 items is developed and proposed and its implications in social work are discussed.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.3
• /
• pp.7-13
• /
• 2007

In the optical module for optical communications, the flip chip bonding is used fer the precise alignment of the optical fiber and optical device. In flip chip bonding, the optical device is aligned and welded while observing the alignment mark of substrate and chip by using flip chip bonder in order to bond the optical device at the exact position. In this research, optical passive alignment method of photodiode(PD) flip chip bonding is suggested for low cost optical subassembly. By using the visible He-Ne laser (633nm wavelength), photodiode is easily aligned with emitting spot on the optical fiber with the help of stereoscopic alignment system. We compensated wavelength dependent deviation about 4m to find out real alignment position of 1550nm input laser by ray tracing. The maximum optical coupling efficiency between the optical fiber and photodiode was about 23.3%.

• International Journal of Highway Engineering
• /
• v.5 no.2 s.16
• /
• pp.15-24
• /
• 2003

The performance of waterproofing system (WPS) is known to be a function of many complex interaction of material factors, design details, and the quality of construction, but it is mainly determined by the bond strength, which is measured by tensile adhesive strength (TAS) test. to the concrete bridge deck. In this research, eight waterproofing membranes were selected from commercial market and the tensile adhesive characteristics of the WPS on concrete bridge deck were investigated in view of various factor in asphalt pavement. The factors include type of asphalt mixture, pavement thickness, paving temperature and influence of wheel loading. TAS test of different asphalt pavement types showed that TAS of WPS under SMA (Stone Mastic Asphalt) pavement was greater than that under dense asphalt pavement. TAS of sheet membranes was improved as the compaction temperature of asphalt concrete increase, but TAS of liquid membranes were not. The influence of thickness of pavement val minimal with given laboratory test condition. TAS of sheet membranes after wheel tracking test were in the order of the sites under wheel path (UWP), before wheel tracking (BWT) and nearby wheel path (NWP). Since TAS of the same WPS of UWP was higher than TAS of BWT, wheel loading had function of pressing WPS resulting in higher adhesive strength. But liquid membranes were variable on types. The feature of detached interface after TAS test showed that sheet types were all detached in between deck concrete and WPS, and liquid types were detached in between asphalt pavement and WPS.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.85-94
• /
• 2013

PURPOSES: The performance of tack coat, commonly used for layer interface bonding, is affected by application rate and curing time. In this study, bonding strength tests were performed according to the application rate and curing time of asphalt emulsion. Based on finding from this study, optimum application rates and curing times are proposed. METHODS: In order to investigate bonding characteristic of asphalt emulsion, tests were performed on both asphalt concrete pavement and portland concrete pavement. Also, asphalt emulsions were tested at the application rate of 0, 0.2, 0.4, 0.6, and $0.8{\ell}/m^2$ and at the curing time of 0, 0.5, 1, 2, and 24 hours. Pull-off test and shear bonding strength test, which commonly used for bonding strength measurement of asphalt emulsion, were adopted for this study. To assess field performance under different testing condition, asphalt emulsions were applied to in-service pavement. Throughout coefficient of determination analysis between material index properties from asphalt emulsion and mechanical response from bonding strength tests, performance correlativity was analyzed. RESULTS: Test results show that optimum application rate for asphalt overlay on asphalt concrete pavement (AOA) and asphalt overlay on concrete pavement (AOC) was $0.4{\sim}0.5{\ell}/m^2$ and $0.3{\sim}0.5{\ell}/m^2$, respectively. According to the curing time increment, tensile strength and shear strength of AOC were increased to 22~44% and 20~39%, respectively. AOA case also show strength increment in tensile strength (42%) and shear strength (9%). We tested the applicability of tack coat materials at the field sites, and our findings demonstrated that the bonding (for D and E) and rapid curing (for B, C, and D, E) performances were superior than others. Among material index properties, there was a high correlation between penetration ratio and bonding strength test result. CONCLUSIONS : Result show that interlayer bonding strength was affected by asphalt emulsion type, application rate and curing time. AOC required slightly higher application ($0.1{\ell}/m^2$) than AOA. Both AOA and AOC cases show higher strength at longer curing time. Up to 2hours of curing, rapid strength increments were observed, but strength increment ratio was decreased after 2hours of curing. From the observed correlation between penetration ratio and bonding strength, it is expected that penetration ratio can be used as one of important factors affecting bonding strength analysis.