• Title/Summary/Keyword: Bolting

Search Result 224, Processing Time 1.762 seconds

Effect of Seedling Size and Low Temperature on Growth and Bolting in Angelica gigas Nakai (참당귀묘의 크기 및 저온처리가 생육과 추대에 미치는 영향)

  • 유홍섭;강병화;김영국;이승택
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.42 no.2
    • /
    • pp.196-201
    • /
    • 1997
  • This study was carried out to understand the effect of low temperature treatment and seedling size on growth and bolting in Angeljca gjgas. Bolting rate increased as period of low temperature increased and bolting rate of control was lower than that of low temperature treatment. In low temperature treatment with seedling size, the smaller seedling size, the higher bolting rate. Period from transplanting to bolting was reduced with low temperature treatment extended and large seedling. The plant height, position of bolting leaf and number of developing leaf were decreased with low temperature treatment extended and large seedling, respectively, There was a highly significant negative correlation between bolting rate and number of developed leaves before bolting and number of developed leaves in growth to first bolting but positive correlation in late growth, respectively.

  • PDF

Ecotype-Dependent Genetic Regulation of Bolting Time in the Arabidopsis Mutants with Increased Number of Leaves

  • Lee, Byeong-Ha
    • Journal of Microbiology and Biotechnology
    • /
    • v.19 no.6
    • /
    • pp.542-546
    • /
    • 2009
  • Leaves are the major biomass-producing organs in herbaceous plants and mainly develop during vegetative stage by activities of shoot apical meristem. There is a strong correlation between leaf number and bolting, a characteristic phenotype during the transition to reproductive phase in Arabidopsis thaliana. In order to study interactions between leaf number and bolting, we isolated a Landsberg erecta-derived mutant named multifolial (mfo1) that produces increased number of leaves and bolts at the same time as the wild type. Through positional cloning and allelism test, mfo1 was found to be an allele of a previously reported mutant, altered meristem program1-1 (amp1-1) that is defective in a glutamate carboxypeptidase and bolts earlier than its wild type, Columbia ecotype, with the increased number of leaves. The bolting time differences between mfo1 and amp1, despite the same phenotype of many leaves, suggest the existence of genetic factor(s) differently function in each ecotype in the presence of mfo1/amp1 mutation.

Plant Growth and Bolting Affected by Transplanting Time in Angelica gigas (참당귀의 정식시기에 따른 생육 및 추대)

  • Yu, Hong-Seob;Jo, Jae-Seong;Park, Chung-Heon;Park, Chun-Geon;Sung, Jung-Sook;Park, Hee-Woon;Seong, Nak-Sul;Jin, Dong Chun
    • Korean Journal of Medicinal Crop Science
    • /
    • v.11 no.5
    • /
    • pp.392-396
    • /
    • 2003
  • This study was carried out to determine plant growth and bolting characteristics of Angelica gigas. Three varieties and/or lines Manchu bolting resistant variety, AGJ90-1 medium type line, and bolting Jinbu local were used for field trial in Suwon. FIve different transplanting times were applied on March 25, April 5, April 15, April 25, and May 5th. Survival rate was decreased by the delayed transplantation and it affected after April 25th respectively. Plant growth by the early transplantation showed the best growth during the beginning stage and recognized signifiquence but not by the late transplantation. Bolting rate revealed severe different by the variety and line, it ranged from $10{\sim}8.1%$ of Manchu, $5.9{\sim}20.3%$ of AGJ90-1, and $58.5{\sim}74.6%$ of Jinbu local clearly. By the treatment of transplantation time bolting rate was different, early plantation showed high bolting rate compare to the late plantation from the all of tested variety and lines. Bolting response according to the transplanting time, bolting resistant variety showed insensibility and boling line showed sensitive response. In Manchu root yield was best when planted on April 5th as 389 kg /10a, in case of AGJ90-1 was determined 377 kg/10a when planted on April 15th, and Jinbu local root yield was showed 133 kg/10a planted on April 25.

Growth and Root Yield in Progeny the Derived from Different Bolting Years in Angelica gigas Nakai. (참당귀(當歸) 추태년차별(抽苔年次別) 채종종자(採種種子)의 후대생육(後代生育) 및 수양(收量))

  • Yu, Hong-Seob;Lee, Seung-Tack;Kim, Kwan-Su;Kim, Young-Guk
    • Korean Journal of Medicinal Crop Science
    • /
    • v.4 no.4
    • /
    • pp.271-276
    • /
    • 1996
  • This studies were conducted to basic information on growth characteristics and root yield in progeny the derived from different bolting years and to establish optimum seed production time in Angelica gigas. Plant height of early and mid-growing stages had decreased with each year increase in bolting year, but showed no significance in late growing stage at different bolting years. Root charac­teristics including root length, root diameter and dry root weight was slightly good and it had high root/ shoot ratio in third year seed production. respectively. Bolting rate showed that first year seed 38.1%, second year seed 10.4% and third year seed 1.2%, respectively. Therefore, optimum seed production time revealed third year seed for reduce bolting rate. Root yield at different bolting years showed average 1,690kg per hectare as fresh root weight on first year seed, 2,860kg on second year and 2,940kg on third year seed, respectively. A significant positive correlation was appeared between bolting rate and plant height in mid-growing stage. On the other hard, there was highly significant negative correlation between bolting rate and root yield.

  • PDF

Bolting Response of Various Lettuce Cultivars Affected by Seed Treatments (종자처리에 의한 상추 품종간 추대반응 차이)

  • Hwang, Hyeon-Jeong;Lee, Jung-Myung;An, Jong-Moon;Kim, Se-Young;Choi, Geun-Won
    • Korean Journal of Environmental Agriculture
    • /
    • v.26 no.4
    • /
    • pp.325-331
    • /
    • 2007
  • A series of experiments were performed to evaluate effects of lettuce seed treatment with low temperature and dry heat treatment (DHT) on bolting response in the case of spring cultivation. During spring production in greenhouse, bolting response of the plants produced from the treated seeds was faster in the order of low temperature treatment, control and DHT. Plant height was increased 5-10 cm higher by low temperature treatment, but plant growth of some cultivars was inhibited by DHT. Difference on lettuce plant growth between low temperature treatment and DHT was gradually diminished with the lapse of time after transplanting. Fresh weight of plant was not significantly different among all treatments. 'Red Gyeolku' showed very early bolting response and plant height was significantly promoted by low temperature treatment. However, 'Cheongchima' showed low bolting percentage after various seed treatments, so it is considered late-bolting cultivar.

Relation between Bolting Rate and Yield in Angelica gigas NAKAI (참당귀(當歸) 추태율(抽苔率)과 수양(收量)과의 관계(關係))

  • Yu, Hong-Seob;Chang, Yeong-Hee;Lee, Seoung-Tack;Kim, Chung-Guk;Kim, Young-Guk
    • Korean Journal of Medicinal Crop Science
    • /
    • v.4 no.1
    • /
    • pp.47-51
    • /
    • 1996
  • This study was carried out to investigate the relation between bolting rate and root yield of Angelica gigas for 3 years from 1992 to 1994. Plant height at early growth stage and bolting rate showed linear regression as y=-8.502+0.5449x. Root yield was highest at the field with 11% bolting. Root yield of Angelica gigas in relation to seedling size was highest from medium and small seedlings with 10 to 15% bolting and from large seedlings with below 10% bolting.

  • PDF

Effect of Temperature and Daylength on Growth and Bolting of Angelica gigas NAKAI (온도(溫度) 및 일장조건(日長條件)에 따른 참당귀 생육특성(生育特性)과 추대현상(抽臺現象))

  • Ahn, Sang-Deuk;Yu, Chang-Youn;Seo, Jeong-Sik
    • Korean Journal of Medicinal Crop Science
    • /
    • v.2 no.1
    • /
    • pp.20-25
    • /
    • 1994
  • This study was carried out to investigate the effect of temperature and daylength on the bolting of Angelica gigas Nakai for decreasing the rate of bolting.Seedlings were transplanted on early December to the PVC pot(1 /1000) in the greenhouse con­trolled the temperature of 15, 20 and $25^{\circ}C$, and the daylength of 8, 12, and 16hrs. Growth of aerial parts, bolting rate and root characteristics of A. gigas were investigated. Seedlings of A. gigas untreated with low temperature were nomally emerged, bolted and flowered in maturing stage. In this results, it was assumed that A. gigas was low sensitive to low temperature. The early growth stage was good at $20^{\circ}C\;and\;25^{\circ}C$, but the late growth was effective at $15^{\circ}C\;and\;20^{\circ}C$. The bolting rate was the highest at $20^{\circ}C$ while the root weight was the lowest. Although the bolting rate was high at $15^{\circ}C$, the yield was increased by the delay of bolting and flowering stage. The bolting rate was increased in the longer daylength and showed more sensitive to the daylength condition than to the temperature. Thus, A. gigas cultivated in gully field with cool temperature or under the shading light could be reduced could the bolting rate.

  • PDF

Optimal pre-conditioning and support designs of floor heave in deep roadways

  • Wang, Chunlai;Li, Guangyong;Gao, Ansen;Shi, Feng;Lu, Zhijiang;Lu, Hui
    • Geomechanics and Engineering
    • /
    • v.14 no.5
    • /
    • pp.429-437
    • /
    • 2018
  • In order to reduce deformation of roadway floor heave in deep underground soft rockmass, four support design patterns were analyzed using the Fast Lagrangian Analysis of Continua (FLAC)3D, including the traditional bolting (Design 1), the bolting with the backbreak in floor (Design 2), the full anchorage bolting with the backbreak in floor (Design 3) and the full anchorage bolting with the bolt-grouting backbreak in floor (Design 4). Results show that the design pattern 4, the full anchorage bolting with the bolt-grouting backbreak in floor, was the best one to reduce the deformation and failure of the roadway, the floor deformation was reduced at 88.38% than the design 1, and these parameters, maximum vertical stress, maximum horizontal displacement and maximum horizontal stress, were greater than 1.69%, 5.96% and 9.97%. However, it was perfectly acceptable with the floor heave results. The optimized design pattern 4 provided a meaningful and reliable support for the roadway in deep underground coal mine.

Study on the Reduction of Bolting by Treatment of Growth Inhibitors in Angelica gigas Nakai (생육억제물질 처리에 의한 참당귀 추대감소 연구)

  • 안상득
    • Korean Journal of Plant Resources
    • /
    • v.7 no.1
    • /
    • pp.1-5
    • /
    • 1994
  • To decrease the bolting rate of Angelica gigas, The growth inhibitors such as MH, Pp333 (paclobutrazol) and CCC(chloroniequat or Cycocel) were treated twice with the interval of 20 days atthe forming stage of flower bud.Growth and bolting rate in plot treated inhibitors were retarded and decreased, and the yield ofroots was also decreased compared with non - treatment. The treatments of MH and Pp333 amongthree inhibitors showed the better effects in decreasing the bolting than that of CCC, but they did notshow the significant in the yield and contents of decursin among each of them.In order to improve the decreasing effects by chemicals, selection of suitable reagents, concentrationand number of treatment should be investigated.

  • PDF