• Journal of Technologic Dentistry
• /
• v.23 no.1
• /
• pp.75-83
• /
• 2001

This study was conducted to find antibacterial agent against growth of dental caries bacteria. St. mutans KDJ-50 from various medicinal plants of which safety was indetified. Medicinal plants used in this study was dried and grinded after purchased at Daegu yakryung sijang and Kyungsan jungang sijang. Medicinal plants extracted with 80% ethanol at boiling point for 3 hrs was used as antibacterial agent after freeze dried. This study was conducted to find antibacterial agent against growth of dental caries bacteria. St. mutans KDJ-50 from 32 medicinal plants of which safety was indetified. The result of using paper disc method. Caryophylli Flos. Coptidis Rhizoma. Phellodendri Cortex. Schizamdrae Fructs. Myristicae Semen, Crataegi Fructus and Acori Graminei Rhizoma was selected as antibacterial agent. The result of viable cell counting method. the antibacterial activity of Caryophylli Flos was highest among tested 7 medicinal plants followed by Phellodendri Cortex and Coptidis Rhizoma. The extinction effect of the St. mutans by Caryophylli Flos was shown with the addition of 0.5 (w/v) in the medium. The high antibacterial activity was acquired at high extraction temperature and long extraction temperature. The antibacterial activity of Caryophylli Flos was not effected by the concentration of ethanol.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.714-719
• /
• 2001

SrBi$_2$Ta$_2$$O_{9}$ thn films were etched in inductively coupled Cl$_2$/CF$_4$/Ar plasma. THe maximum etch rate was 1060 $\AA$/min at a Cl$_2$/(Cl$_2$+CF$_4$+Ar)=0.2. The 20% additive Cl$_2$ into CF$_4$/Ar plasma decreased carbon and fluorine radicals, but increased Cl radicals. Sr was effectively removed by reacting with Cl radical because the boiling point of SrCl$_2$(125$0^{\circ}C$) is lower than that of SrF$_2$(246$0^{\circ}C$). The chemical reactions on the etched surface were studied with x-ray photoelectron spectroscopy and secondary ion mass spectrometry. The etching profile was evaluated by using scanning electron microscopy.y.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.311-316
• /
• 2010

The ignition and the burning characteristics of aluminum and magnesium particles ($30-110{\mu}m$ in diameter) isolated due to electrodynamic levitation were experimentally investigated. The burning time, the ignition delay time, the flame temperature, and the flame diameter were measured. The thermal radiation intensity was measured using the photomultiplier tube and the combustion history was monitored by high-speed cinematography. Two-wavelength pyrometry measured the temperature of the burning particles. The burning times of aluminum particles were measured approximately 5 to 8 times longer than those of magnesium particles. Exponents of $D^n$-law, for the burning rate of magnesium and aluminum particles of diameters less than $110{\mu}m$, are found to be 0.6 and 1.5, respectively. The instant of aluminum ignition is clearly distinguished with the ignition delay time little less than 10 ms, however the burning history of magnesium particle exhibits no distinct instant of the ignition. The ignition delay time of magnesium particle (less than $110{\mu}m$) were approximately shown in the range from 50 to 200 ns. The flame temperatures of single metal particles are lower than the boiling point of the oxide. The nondimensional flame diameters for magnesium are decreased with increasing of the diameter. The nondimensional flame diameters for aluminum are not changed significantly.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.105-108
• /
• 2008

Beijing as one of the prosperous cities has been attracting more and more to the people in China and overseas because of the coming Olympic Games. And the housing enterprises have become extremely popular as follows. The request of housing designation has also been increased and a color factor should be the key point of housing designation. This study is a research of perceptual color designation in public residential housing in Beijing. In particular, this study will deal with the color designation development trend of public residential housing in Beijing after an analysis of color designation of high-class residential housing from 2000 to 2007 in Beijing. Color around people is not only understood more rationally and personally in 21 century but also it is pursued to get a brand-newly incentive from tradition. While color could give housing many wonderful looks. Chromatics people have had a deeper acknowledge of color and color function so color has played a key role of housing designation. Color effect on people in physical and physiology aspect is getting more important. The color issue are one of the most effective and efficient factor in the in public residential housing, therefore this study deal with this issue 'How to effectively use the color in public residential housing space.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.45-48
• /
• 2000

High dielectric (Ba,Sr)TiO$_3$ thin films were etched in an inductively coupled plasma (ICP) as a function of C1$_2$/Ar gas mixing ratio. Under Cl$_2$(20)/Ar(80), the maximum etch rate of the BST films was 400$\AA$/min and selectivities of BST to Pt and PR were obtained 0.4 and 0.2, respectively. We investigated the etched surface of BST by x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and x-ray diffraction (XRD). From the result of XPS analysis, we found that residues of Ba-Cl and Ti-Cl bonds remained on the surface of the etched BST for high boiling point. The surface roughness decreased as Cl$_2$ increases in Cl$_2$/Ar plasma because of non-volatile etching products. This changed the nature of the crystallinity of BST. From the result of XRD analysis, the crystalliility of etched BST film maintained as similar to as-deposited BST under Ar only and Cl$_2$(20)/Ar(80). However, (100) orientation intensity of etched BST film abruptly decreased at Cl$_2$ only plasma. It was caused that Cl compounds were redeposited on the etched BST surface and damaged to crystallinity of BST film during the etch process.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.172-180
• /
• 2006

This study was to analyze the effect of mixed fuel composition and mass fraction on the characteristics of evaporating diesel spray and combustion under the various ambient conditions. The characteristics of vaporization distribution and combustion were visualized by laser induced fluorescent method and direct photography. The experiments were conducted in the constant volume vessel and rapid compression expansion machine with optical access. Multi-component fuels mixed i-octane, n-dodecane and n-hexadecane were injected the vessel and rapid compression expansion machine with electronically controlled common rail injector. Experimental results show that fuel vapor formed stratified distribution. And vaporization and diffusion are become actively increasing in mass fraction of low boiling point component. Consequently multi-component fuels were expected to control the evaporating behavior according to their suitable mass fraction.

• Journal of Welding and Joining
• /
• v.31 no.6
• /
• pp.27-31
• /
• 2013

Magnesium alloy is used on parts of aircraft and electronic equipment because of the highest specific strength among the common metal materials. Recently, studies about appling magnesium alloy sheet to automotive bodies are on the increase rapidly. For application to automotive bodies, researches about characteristics of resistance spot welding of magnesium alloy sheet are essential. Magnesium alloy has low boiling point, so getting sound bead shape is difficult when appling varies welding processes. Resistance spot welding is also particular about setting optimum welding conditions because of spatter generation, pores and cracks occurrence in nugget. And life of electrodes is very short because of alloying with copper that main material of electrodes. This requires frequent dressing and replacement of electrodes and decrease in productivity of resistance spot welding on magnesium alloy. Therefore in this study, for effective analysis of changes in tensile shear load and nugget size during electrode life test, evaluate detail characteristics of resistance spot welding on magnesium alloy sheet using dome type electrode.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.61-68
• /
• 2020

Thermographic phosphor (TP) thermometry is a noncontact optical measurement method and has been applied in many fields such as combustion and heat transfer. However, due to the limitation of bonding technology and measurement method, most TP thermometry studies were conducted only on the air environment with water-soluble binders. In this paper, a temperature measurement technology in water using TP is proposed by coatings of manganese activated magnesium fluorogermanate (Mg4FGeO6:Mn4+, MFG) with Polydimethylsiloxane (PDMS). Four MFG-PDMS coatings with different thicknesses were prepared. The lifetime of MFG was not affected by the thickness of the coating as a result of the experiment and analysis of phosphor intensity using a photomultiplier tube. To measure the surface temperature field of an immerged body in water, a cylinder-type cartridge heater was coated with MFG doped PDMS. Transient surface temperature field was successfully measured even the initial temperature is higher than the boiling point of water.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.371-380
• /
• 2022

Objectives: To ensure that employers handling petroleum compounds understand whether petroleum-based UVCB (unknown or variable composition, complex reaction products, or biological materials) substances contain hazardous substances and comply with the Occupational Safety and Health Act, petroleum-based UVCB substances were analyzed and the results from samples were compared with MSDS (Material Safety Data Sheet) contents. Methods: Twenty-one petroleum samples were analyzed using GC-MS (Gas Chromatography-Mass Spectrometry), targeting ten volatile organic compounds regulated by the Occupational Safety and Health Act. Results: The target chemicals were detected in 13 out of 21 samples. All 13 samples were in the naphtha (low boiling point naphthas (gasolines)) group. There were also naphtha group samples containing 2% benzene. Some naphtha samples used as solvents contained about 1% benzene. Conclusions: This study shows that naphtha group petroleum substances contain hazardous chemicals in many cases. In particular, if benzene, n-hexane, and toluene with low occupational exposure limits are contained above the limit concentration. Such information should be delivered in the article on MSDS legal regulations.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.64-71
• /
• 2023

In this study, we investigated the effects of BiAlSiO glass composition on its glass forming range, thermal properties, and plasma resistance. The results showed that increasing the Al2O3 content suppressed the tendency for crystallization and hindered glass formation beyond a certain threshold. Bi2O3 was found to increase the content of non-bridging oxygen, resulting in a decrease in glass transition temperature and an increase in thermal expansion coefficient. Furthermore, the etching rate was found to improve with increasing Al2O3 content but decrease with increasing SiO2 content. It was concluded that the boiling point of fluorinated compounds should be considered to 900℃. Therefore, this study is expected to contribute to the understanding of the properties of BiAlSiO glass and its application to low temperature melting PRG compositions.