• 한국태양에너지학회 논문집
• /
• 제36권3호
• /
• pp.63-74
• /
• 2016

The nanofluids are the fluids with excellent thermal property, it is expected as a working fluid of the next generation. The nanofluids are well known that if it is used in the boiling heat transfer system, the critical heat flux is enhanced up to 200%, and the thermal conductivity is increased up to from 10 to 160%. However, the fouling phenomenon can be occurred that nanoparticles of nanofluids are deposited on the heat transfer surface. Therefore, to investigate relation between nanofluid and fouling, this study is carried out using oxidized graphene nanofluid. Also it compared and analyzed the critical heat flux and the boiling heat transfer coefficient. As the result, in case of oxidized graphene deposition for fouling, the critical heat flux is increased up to 20% more than oxdized graphene nanofluid. However, the boiling heat transfer coefficient is decreased down to about $6kW/m^2K$ at $1,000kW/m^2$ more than pure water.

• 한국과학교육학회지
• /
• 제26권7호
• /
• pp.805-812
• /
• 2006

본 연구에서는 끓는점 오름에 대한 고등학교 화학 교과서의 기술 양식과 고등학생, 예비교사, 고등학교 화학교사의 이해에 대하여 조사하였다. 6차와 7차 교육과정에 근거하여 개발된 고등학교 화학 II 교과서를 분석하였고 고등학생과 예비교사, 화학교사의 개념은 설문지를 통해 얻었다. 끓는점 오름의 원인에 대한 교과서의 설명 유형은 '표면의 용매 입자수의 감소', '용매-용질간의 인력', 그리고 '표면 입자수의 감소와 용매-용질간의 인력'등의 세 가지 유형으로 분석되었다. 개념조사 결과 '용매-용질간의 인력'을 끓는점 오름의 원인으로 인식하는 학생과 예비교사, 화학교사의 비율이 높았다. 대상자들은 끓는점 오름을 설명하기 위하여 엔트로피 개념보다 엔탈피 개념을 선호하는 경향이 있었고, 그 원인을 분석하기 위하여 사후 인터뷰를 실시하였다.

• 한국가시화정보학회지
• /
• 제18권1호
• /
• pp.18-25
• /
• 2020

The droplet impact behavior is dominated by some parameters such as surface temperature, We number, surface and fluid property. Especially, Leidenfrost effect which prevents the contact between surface and droplet is very powerful phenomenon for determining droplet impact behavior. Due to this effect, the impact regime is divided into contact boiling regime and film boiling regime whether the droplet contact with the surface. Many studies have found that surface micro-structures which processed by surface processing are effective to overcome the Leidenfrost effect. In this study, droplet impact behaviors were compared using ethanol both on flat and laser-ablated Al surface. On the flat surface, impact regime was mainly divided by surface temperature. And there is key dominant parameter for each regime. On the laser-ablated surface, we could see changed impact regime and different impact behavior such as jetting and ejection of tiny droplets despite of same impact conditions.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1851-1859
• /
• 2022

Experimental research on flow characteristics of open natural circulation system was performed, to figure out the mechanism of the open natural circulation behaviors. The influence factors, such as the heating power, the inlet subcooled and the level of cooling tank on the flow characteristics of the system were examined. It was shown that within the scope of the experimental conditions, there are five flow types: single-phase stable flow, flash and geyser coexisting unstable flow, flash stable flow, flash unstable flow, and flash and boiling coexisting unstable flow. The geyser flow in flash and geyser coexisting unstable flow is different from classic geysers flow. The flow oscillation period and amplitude of the former are more regular, is a newly discovered flow pattern. By drawing the flow instability boundary diagram and sorting out the flow types, it is found that the two-phase unstable flow is mainly characterized by boiling and flash, which determine the behavior of open natural circulation respectively or jointly. Moreover, compared with full liquid level system, non-full liquid level system is more prone to boiling phenomenon, and the range of heat flux density and undercooling degree corresponding to unstable flow is larger.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권2호
• /
• pp.156-164
• /
• 1986

In the case of boiling on high temperature wall, vapor film covers fully or parcially the surface. This phenomenon, film boiling or transition boiling, is very important in the surface heat treatment of metal, design of cryogenic heat exchanger and emergency cooling of nuclear reactor. Mainly supposed hydraulic-thermal accidents in nuclear reactor are LCCA (Loss of Coolant Accident) and PCM (Power-Cooling Mismatch). Recently, world-wide studies on reflooding of high temperature rod bundles after the occurrence of the above accidents focus attention on wall temperature history and required time in transient cooling process, wall superheat at rewet point, heat flux-wall superheat relationship beyond the transition boiling region, and two-phase flow state near the surface. It is considered that the further systematical study in this field will be in need in spite of the previous results in ref. (2), (3), (4). The paper is the study about the fast transient cooling process following the wall temperature excursion under the CHF (Critical Heat Flux) condition in a forced convective subcooled boiling system. The test section is a vertically arranged concentric annulus of 800 mm long and 10 mm hydraulic diameter. The inner tube, SUS 304 of 400 mm long, 8 mm I.D, and 7 mm O.D., is heated uniformly by the low voltage AC power. The wall temperature measurements were performed at the axial distance from the inlet of the heating tube, z=390 mm. 6 chromel- alumel thermocouples of 76 .mu.m were press fitted to the inner surface of the heating tube periphery. To investigate the heat transfer characteristics during the fast transient cooling process, the outer surface (fluid side) temperature and the surface heat flux are computed from the measured inner surface temperature history by means of a numerical method for inverse problems of transient heat conduction. Present cooling (boiling) curve is sufficiently compared with the previous results.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.185-198
• /
• 1995

This is an experimental study conducted to visualize the nucleate boiling phenomena and flow regimes occurring inside the liquid pool in a closed two-phase thermosyphon. To meet this purpose, an annular-type thermosyphon was designed and manufactured using a glass tube and a stainless steel tube, being assembled axisymmetrically. The heat to be supplied to the working fluid is generated within a very thin layer of stainless steel tube wall by applying a high frequency electromagnetic field through the induction coil, axisymmetrically set around the evaporator zone. Some important results were as follows ; 1) Considering the structural complexity of the tested thermosyphon, it showed good performance for the range of heat flux 2＜ q" ＜25kW/$m^2$ and saturation vapor pressure, 0.1＜Pv＜1.1bar 2) different type of nucleating boiling regimes were observed as described below, -Pulse boiling regime : Flow pattern changed cyclically with time during 1 cycle of pulse boiling process. The onset of Nucleation was followed by expulsive growing of vapor bubble, resulting in the so called blow-up phenomenon, massive expulsion of large amount of liquid around the bubble. -Transient : Some spherical vapor bobbles were observed growing out from 2~3 nucleating sites, that was dispersed at the lower part of the heated tube wall in the liquid pool. But the rest upper region above the nucleating sites were filled with churns or bubbles of vapor. -Continuous nucleate boiling regime : The whole zone of evaporator was filled with lots of spherical vapor bubbles, and the bubbles showed tendency to decrease in diameter as the heat flux increased.ased.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.833-846
• /
• 1988

본 연구에서는 후래시현상과 가열이 동시에 존재하면서 증발을 일으키는 수직 증발관내에서의 유동양식에 대해서, 우선 전기 프로우브를 이용하여 관내의 유동양식 에 따른 전기적 신호를 얻고, 시진실험 방법(photographic experimental method)을 통 하여 이를 확인한다. 또한, 전기 프로우브를 통하여 얻은 신호는 적절한 해석과정을 통해 수직 증발관내의 유동에 따른 기공률을 측정하는데 적용된다.

• 기본간호학회지
• /
• 제6권1호
• /
• pp.78-95
• /
• 1999

The grafting of a kidney has been found to be the best medical treatment for patients who have renal insufficiency failure, but the patients still have experienced much trouble and apprehension. This study was done to further nursing theory developing for patients who have has a kidney graft from another person. The research method followed grounded theory methodology of Strauss and Corbin. The subjects were three female and four male patients. This study done befween Oct. 1997 and Mar. 1998. All of the subjects were interviewed by the author. Interview were done by the long interview technique and observation. In the process of data analysis, 'heart-boiling' was found to be the core phenomenon. The results were composed to 101 concepts. These concepts were grouped into nineteen categories, and then to twelve categories. There were 12 super-class categories as follows ; 'pain', 'heart-boiling', 'experience of dialysis', 'term of admission to a hospital', 'support of other person', 'dependence on God', 'direction', 'negative reaction', 'positive reaction', 'comfortable', 'lacking', 'acceptance'. In this process, 14 hypotheses were derived from the categories as follows ; (1) The more experience with dialysis that the patients have, the stronger the heart-boiling will tend to be. (2) The less experience with dialysis the patients have, the weaker the heart-boiling will tend to be. (3) The longer admission to hospital the patients have, the stronger the heart-boiling will be. (4) The shorter the admission to hospital the patients have, the weaker the heart-boiling will be. (5) The weaker the intense-grief is, the more positive the reaction to heart-boiling the patients wll have. (6) The stronger the intense-grief is, the more negative the reaction to heart-boiling the patients will have. (7) The stronger the support of other persons that the patients have, the more positive the reaction to heart-boiling the patients will have. (8) The weaker the support of other person that the patients have, the more negative the reaction to heart-boiling the patients will have. (9) The stronger the dependence on God that the patients have, the mure positive reaction to heart-boiling the patients will have. (10) The weaker the dependence on God that the patients have, the more negative reaction to heart-boiling the patients will have. (11) The more positive thoughts that the patients have, the more positive reaction to heart-boiling the patinets will have. (12) The more negative thoughts that the patients have, the more negative reaction to heart-boiling the patients will have. (13) The more positive reaction the patients have, the more free from heart-boiling the patients tend to be. (14) The more negative reaction the patients have, the less free from heart-boiling the patients tend to be. From the analysis of observed data and comparing each class, I concluded that there are four formula relation types between reaction of patients and heart-boiling. (1) If patients have the experience of dialysis, have a long term admission to hospital, are strong in heart-boiling, depend on God, have positive thoughts and another's strong support, they experience release by positive reaction to the intense-grief. (2) If patients have the experience of dialysis, have a short term admission to hospital, are weak in heart-boiling, do not depend on God, have negative thoughts, and have few supports from others, they experience attachment to heart-boiling though a negative reaction. (3) If patients have the experience of dialysis, have a long term admission to hospital, are strong in heart-boiling, do not depend on God, and have negative thoughts, they experience attachment to heart-boiling through negative reaction in spite of support from another. (4) If patients have the experience of dialysis, have a long term admission into hospital, are strong in heart-boiling and satisfaction is low, but they have positive thoughts, then they experience acceptance and harmony through the positive reaction to heart-boiling. The results of this study are expected to help the way nurses care for patients who have had a kidney graft from another.

• 대한기계학회논문집B
• /
• 제34권11호
• /
• pp.1005-1013
• /
• 2010

본 연구는 HCCI 엔진의 운전조건을 고려한 혼합연료의 감압비등 분무제어방법을 평가하기 위하여 수행하였다. 2상영역이 존재하는 혼합연료는 고비점성분의 증발촉진과 함께 연료분무의 급격한 증발을 유도할 수 있는 감압비등분무를 이용함으로써 저온 및 저밀도장에서 혼합기형성과정의 제어가 가능하다. HCCI 엔진은 이러한 분위기조건에서 연료를 조기분사하기 때문에 착화성이 높은 경유와 휘발성이 높은 가솔린성분으로 함유한 혼합연료의 감압비등현상을 이용함으로써 액체연료의 분열, 미립화와 같은 물리적 제어 및 착화연소에 의한 화학적 제어를 실현할 수 있다. 본 연구는 혼합연료의 성분과 몰분율을 주요변수로 설정하여 정적용기 내에 분사된 연료분무의 감압비등현상을 슐리렌 화상 및 Mie 산란광을 촬영한 후, 화상처리과정을 통하여 이루어졌다. 그 결과로 감압비등현상은 비교적 저온 및 저밀도장에서 분무구조가 크게 변화함을 알 수 있었으며, 조기 연료분사시기에서 감압비등분무를 이용한 혼합기형성을 제어함으로써 HCCI 연소에 적용이 가능할 것으로 분석하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.108-113
• /
• 1996

Several analytical models for the departure from nucleate boiling (DNB) phenomenon have been developed during the last decade. Among these, Chang & Lee's model based on a bubble crowding mechanism is remarkable in the fundamental features characterized as the formulation of mass, energy, and momentum balance equation at thermal-hydraulic conditions leading to the DNB. However, Bricard and Souyri remarked that the assumption of stagnant bubbly layer at the DNB condition is questionable and the signs on the axial projections of the momentum fluxes at the core/bubbly layer interface in the momentum balance equations are erroneous. From this remark, Chang & Lee's model has been re-examined and modified by correcting the erroneous treatments in the momentum balance equations and removing the spurious assumptions. The revised model predicts well the extensive DNB data of water in uniformly heated tubes at low qualities and shows more accurate prediction compared with the original model.