• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.197-204
• /
• 2003

This paper develops a computer model for estimating the handling of a cabover type large-sized truck. The truck is composed of front and rear suspension systems, a frame, a cab, and ten tires. The computer model is developed using ADAMS. A shock absorber, a rubber bush, and a leaf spring aunt a lot on the dynamic characteristic of the vehicle. Their stiffness and damping coefficient are measured and used as input data of the computer model. Leaf springs in the front and rear suspension systems are modeled by dividing them three links and joining them with joints. To improve the reliability of the developed computer model, the frame is considered as a flexible body. Thus, the frame is modeled by finite elements using MSC/PATRAN. A mode analysis is performed with the frame model using MSC/NASTRAN in order to link the frame model to the computer model. To verify the reliability of the developed computer model, a double lane change test is performed with an actual vehicle. In the double lane change, lateral acceleration, yaw rate, and roll angle are measured. Those test results are compared with the simulation results.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.753-765
• /
• 2008

In this study, the characteristics of body types of female adults Korean living in Japan were reviewed by analyzing factors and groups in order to provide basic data required to research body types. The subjects were 304 women in their 20's, 40's and 60's born in Japan and living in Osaka at present. The major results of this study are as follows. As a result of factor analysis, there were eight factors for the body types of women in their 20' and 40'. In case of the women in their 60', nine factors were extracted. The results of cluster analysis were as follows: Type one from the women in their 20' was tallest and has long legs. Type two was short and had a small frame with lowest weight. Type three had a thick frame and weighed heavy. It was categorized into a fat body type. Type one from the women in their 40' had medium height but a fat frame. Type two was tallest and had average weight and long legs. Type three was short and had a small frame with lowest weight. Type one from the women in their 60'was tallest and had long legs. Type one was categorized into a slim body type, Type two was categorized into a fat body type, and Type three was categorized into a short and small body type with shortest height and lowest weight.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2615-2625
• /
• 2011

Recently in worldwide and Korea domestically, the LRT vehicles are introduced as reputable urban transit system, in a view of energy saving, punctuality and eco-friendly as well as transport efficiency. At first time in Korea, the Busan metro Line 4 was applied with AGT system which is a kind of LRT using the Rubber tired AGT vehicle and developed from 1999 to 2004 in charge of Korean government. Busan selected the AGT system for Metro Line 4 as the solution of traffic jam and networking the intercity. At present, Busan Metro Line 4 has been running since opened at March 30, 2011. The vehicle of Busan metro line 4 is aiming the maximization of LRT vehicle advantage that is the lightness of vehicle size and vehicle weight. So, it did size downed and weight downed by lightened the weight of car frame and bogies and by the compactness of electrical on-board equipments. The study carried out the structure analysis to verify and safety and performance of car body and bogie frame of Busan Metro Line 4 vehicles. In this study, it was analyzed the stress of main load and verified the fatigue strength. And measured the dynamic stress sending to body structure and bogie frame while running on main line and analyzed the fatigue stress. As a result, it verified the safety and life cycle of car body and bogie frame.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.71-78
• /
• 2011

A kart is a vehicle without the suspension system and the differential gear. The kart frame as an elastic body plays the role of a spring. By the cornering of a kart, rolling, pitching and twisting motions are induced in the kart frame. Also the slip or noncontact of the wheel and a permanent deformation of the kart frame can be induced. In order to examine closely this phenomenon, measurement on height-displacements with various sensors and tracking system and analysis on the kart frame twisting characteristics with the rolling and pitching angle are needed. According to the measurement result, while driving in a curve at high speed the kart frame is quite twisted. Analysis on the measurement results shows that a kart used primarily in high speed requires a frame with low torsional stiffness and a frame material with high tensile strength and large elongation.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.531-538
• /
• 2006

그레이팅은 아스팔트 도로에 설치하여 배수를 할 수 있는 구조물이다. 본 논문에서는 그레이팅의 구조를 개선하여 토사의 쌓임을 방지 할 수 있는 신제품을 제안한다. 기존 제품은 프레임에 오물이 쌓여 있어 평상시 해충이나 악취가 발생하며 우천 시 배수가 원활하지 못해 물이 고이는 현상도 빈번할 뿐 아니라 역류하는 현상이 발생한다. 또한 기존 그레이팅이 프레임과 본체를 일체형으로 설치하여 파손 시 전체를 교체하여야 하는 단점이 있다. 본 연구는 그레이팅 본체와 프레임을 분리시킨 구조로 프레임을 멘 홀에 시멘트와 함께 기초공사 하여 고정한 후 그레이팅 본체는 장착탈이 가능한 구조로 개발하였다. 또한 분실 방지용 지그도 설치하여 이를 개선하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.465-469
• /
• 2017

본 논문에서는 스마트폰 적용을 위한 휴먼 바디 추적 방법을 제안한다. 기존 휴먼 바디 추적 방법은 크게 센서 기반 방법과 비전 기반 방법으로 구분된다. 센서 기반 방법은 위치 정보의 누적 오차로 인해 추적 성능이 떨어지는 단점이 있다. 비전 기반 방법은 누적 오차가 없지만 스마트폰 적용을 위한 연산량 감소가 요구되고 있다. 본 논문에서는 스마트폰 적용을 위한 휴먼 바디 추적 방법으로 개선된 HOG 알고리즘을 이용한다. 개선된 HOG 알고리즘은 다운샘플링과 프레임 샘플링을 통해 구현된다. 다운샘플링에는 가우시안 피라미드가 적용되고, 프레임 샘플링에는 uniform sampling이 적용된다. 제안한 알고리즘을 2개 기기, 4개 해상도, 4개 프레임에서 측정하였고, 실시간으로 적용이 가능한 다운샘플링과 프레임 샘플링 파라미터 중에서 가장 검출률이 좋은 값을 도출하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.843-851
• /
• 2007

It is known that bogie frame must have sufficient stiffness for car body and passenger weight and transfer traction and braking force, and as of today most studies and verifications are restricted to static and fatigue analysis for force acted on bogie frame. Bogie frame is mounted with equipments to control the signal, traction and so on, this equipment's behavior is subjected to vibration mode occurs on running condition. If the resonance occurs on this equipment, the possibility of crack occurrence on bracket connected with equipment and bogie frame will be increased. In this paper, the method of vibration strength verification for bracket attached on bogie frame will be introduced by using frequency response method.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.112-119
• /
• 2004

This paper develops a computer model of a cabover type large truck for estimating the effects of the mounted method of frame on handling performance. The computer model considers two mounted methods of frame; flange mounted and web mounted. Frame is modeled by finite elements using MSC/NASTRAN in order to consider the flexibility of frame. The reliability of the developed computer model is verified by comparing the actual vehicle test results with the simulation results. The actual vehicle test is performed in a double lane change course, and lateral acceleration, yaw rate, and roll angle are measured. To estimate the effects of the mounted method of frame on handling performance, simulations are performed with the flange mounted and web mounted frame. Simulation results show that the web mounted frame＇s variations of roll angle, lateral acceleration, and yaw rate are larger than the flange mounted frame＇s variations, especially in the high test velocity and the second part of the double lane course. Also, simulation results show that the web mounted frame＇s tendencies of roll angle, lateral acceleration, and yaw rate advance the flange mounted frame＇s tendencies, especially in the high test velocity and the second part of the double lane course.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.215-218
• /
• 2002

In this paper, we applied composite material of high specific stiffness and strength to the fabrication of a folding wheelchair frame for the replacement of conventional metal wheelchair frames. A one-body composite frame was designed and the finite element analysis was performed on this design. Some specimens of joint parts were manufactured and strength test was done. With the results of analysis and test, some modification was done and a prototype was produced.

• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1202-1210
• /
• 2005

This paper develops a computer model for estimating the bump characterisitcs of a cat)over type large-sized truck. The truck is composed of front and rear suspension systems, a frame, a cab, and ten tires. The computer model is developed using MSC.ADAMS. A shock absorber, a rubber bush, and a leaf spring affect a lot on the dynamic characteristic of the vehicle. Their stiffness and damping coefficient are measured and used as input data of the computer model. Leaf springs in the front and rear suspension systems are modeled by dividing them three links and joining them with joints. To improve the reliability of the developed computer model, the frame is considered as a flexible body. Thus, the frame is modeled by finite elements using MSC.PATRAN. A mode analysis is performed with the frame model using MSC.NASTRAN in order to link the frame model to the computer model. To verify the reliability of the developed computer model, a double wheel bump test is performed with an actual vehicle. In the double wheel bump, vortical displacement, velocity, acceleration are measured. Those test results are compared with the simulation results.