• Title/Summary/Keyword: Body Surface Temperature

Search Result 402, Processing Time 0.029 seconds

The Relationships between Abdominal Temperature and Some Thermoregulatory Responses in Male Broiler Chickens

  • Zhou, W.T.;Fujita, M.;Ito, T.;Yamamoto, S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.10 no.6
    • /
    • pp.652-656
    • /
    • 1997
  • This study was conducted to determine the relationships between abdominal temperature (Tabd) and some thermoregulatory responses, such as heat production (HP), heart rate (HR), respiration rate (RR), temperature of external ear tract (Tee), comb surface temperature (Tcs) and shank skin temperature (Tss), for revealing the role of deep body temperature in the thermoregulation of broiler chickens. Tabd was divided into 5 zones of 40-41, 41-42, 42-43, 43-44 and $44-45^{\circ}C$, and maintained for 3 hours in each zone by varying environmental temperature from 11 to $33^{\circ}C$. HP and HR had a greater increase with Tabd above $42.5^{\circ}C$. RR increased markedly with Tabd above $41.5^{\circ}C$, and reached a maximum when Tabd was at $42.5^{\circ}C$, then began to decrease. In addition, HP and HR increased significantly with decrease RR during the decreasing phase of panting. Tcs and Tss changed rapidly with Tabd when Tabd was below $41.5^{\circ}C$, and increased more slowly above $41.5^{\circ}C$. Tee was lower than Tabd, and its increase was less than that of Tabd. These results suggest that changes in thermoregulatory responses are induced by an increase in abdominal temperature. Tabd increases to adjust the ratio of sensible and evaporative heat loss when Tabd is below $42.5^{\circ}C$, while the ability in body temperature regulation gradually disappears when abdominal temperature exceeds $42.5^{\circ}C$ and heat balance can not be maintained.

A Study on the Fishing Efficiency of the Jigging Gear Neon Flying Squid , Ommastrephes Bartrami in the North Pacific (북태평양 빨강오징어 채낚기의 조획성능에 관한 연구)

  • 오희국
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.30 no.3
    • /
    • pp.150-160
    • /
    • 1994
  • Drift gillnet fishery for neon flying squid in the North pacific was one of the major pelagic fisheries of Korea until 1992, its annual catch was 79, 000M/T as average during 1988-1992, but moratoriumed since 1993 according to the decision of UN. Therefore, for the developing of the new fishing gear for the squid, the seven types of rip hook by automatic squid jigging machine were experimented by the korean research vessel Pusan 851 (G/T 1.126, 2.600 PS) in the North Pacific (38 $^{\circ}$30'-43 $^{\circ}$N, 152 $^{\circ}$E-178 $^{\circ}$W) from July 6. 1993 to August 31. 1993. The investigation on catch rate, dropout rate, and catch condition of the rip hooks related to the fishing lamp power for aggregating the squid were carried out during the period. The results obtained are as follows: The composition of catch by automatic squid jigging machine was 83.9% for neon flying squid. 15.5% for boreopacific gonate squid. 0.6% for boreal clubhook squid, and 0.01% for luminous flying squid. The catch rate of neon flying squid was 94.6% in 13.6-18.3$^{\circ}C$ of surface water temperature and 5.4% in others. The higher catch rate of neon flying squid was made in the range 13.6-18.3$^{\circ}C$ of temperature at the surface and about 1$0^{\circ}C$ of temperature at the 100m layer. The CPUE of neon flying squid in the 13.6-18.3$^{\circ}C$ of surface water temperature was ranged 0.8-11.8kg (8.7kg as average). The mantle length and body weight of neon flying squid caught in the experiment were ranged 18.3-51.3 cm, 140-3, 980g and mean mantle length and mean body weight were 29.4cm, 972g respectively. The catch rate of neon flying squid was the highest at dawn with a value of 25.0% of the total catch. The body weight of neon flying squid caught by the D type hooks was 1.7 times more than that of the A type hooks. The dropout rate of neon flying squid caught by the seven types hooks was 7.9-57.5% (19.0% as average), and dropout rate of the D type hooks was 7.9% with 2.7 times decrease than that of the A type hooks. The catch efficiency of small sized neon flying squid in case of using on-off switch method on fishing lamp in 15 minutes intervals was 2.6 times higher than that of the on-switch method with same fishing lamp power.

  • PDF

Factors that Influence Biofilm Formation in Vibrio parahaemolyticus (장염비브리오의 biofilm 형성에 영향을 미치는 인자)

  • No, A-Reum;Park, Kwon-Sam
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.42 no.5
    • /
    • pp.456-460
    • /
    • 2009
  • Biofilm is a structured community of microorganism encapsulated within a self-developed polymeric matrix and adherent to a living or a solid surface. In this study, we investigated the effects of various substrates on the formation of biofilm in Vibrio parahaemolyticus. We found that biofilm formation profoundly increased in a substrate, that consisted of calcium chloride, calcium nitrate, and calcium sulfate in 1% peptone water. On the other hand, a dramatic reduction in biofilm formation was observed in a substrate, that consisted of glucose and ferric chloride in LB broth. These results suggest that V. parahaemolyticus prefer to form a biofilm on the surface of a crustacean or a clam, where calcium ion is rich, and also where seawater temperature is relatively lower. In contrast, high levels of glucose in a crustacean or a clam body resulting from increased seawater temperature, can make V. parahaemolyticus detach from it and lead to free floating.

Effects of Steel Chemistry, Annealing and Galvannealing Conditions on Bake Hardenability of Hot-Dip Galvannealed Sheet Steels (합금화 용융아연 도금강판의 강성분, 소둔 및 합금화 열처리가 소부경화성에 미치는 영향)

  • 이호종;김종상
    • Journal of the Korean institute of surface engineering
    • /
    • v.34 no.3
    • /
    • pp.247-257
    • /
    • 2001
  • In an effort to improve the dent resistance of exterior body panels at a reduced steel thickness, the bake hardenable steels added Ti or Nb with tensile strength of 35Kgf/$\textrm{mm}^2$ were investigated. The bake hardenability increased with the annealing temperature and solute carbon content. Bake hardening of 3 to 5Kgf/$\textrm{mm}^2$ was obtained in steels with a controlled solute carbon concentration range from 6 to 10ppm. The galvannealing temperature and time had little influence on the bake hardenability. The Fe-Zn alloying reaction of 35Kgf/$\textrm{mm}^2$ BH steel was remarkably retarded due to a 0.07%P addition. The optimum galvannealing temperatures of 35Kgf/$\textrm{mm}^2$ BH steel were ranged from 520 to 56$0^{\circ}C$ in view of the Fe content and powdering resistance. The cross-section and planar views of the galvannealed coatings to characterize morphology development were discussed.

  • PDF

Thermal Stability of 2.5Y-TZP under Low-Temperature Aging (2.5Y-TZP의 안정성에 관한 연구)

  • 장성도;오경영
    • Journal of the Korean Ceramic Society
    • /
    • v.27 no.2
    • /
    • pp.226-232
    • /
    • 1990
  • The degradation phenomena and thermal stability of 2.5Y-TZP at low-temperature were studied by means of XRD, Raman spectra and microstructural analysis. The degradation of heat-treated 2.5Y-TZP at 20$0^{\circ}C$-20hr in air was observed on the TZP surface, be caused by the cracks generated from tlongrightarrowm transformation, and the cracks was propagated inside the polycrystalline body. The ZrO2 grain boundaries and grains near the crack were revealed as if these were diffused and dissolved. And it was also observed mlongrightarrowt transformation as the degraded TZP was refired at 140$0^{\circ}C$, and it was thought to be the fact that the moisture in atmosphere during the aging process contributed to the degradation. The thermal stability of 2.5Y-TZP was improved dramatically with an addition of 3w/o CeO2 or a provision of high Y2O3 concentration on the TZP surface.

  • PDF

The characteristics analyses of deteriorated PVC insulated flexible cords by over-current (과전류에 의해 열화된 비닐코드의 특성 분석)

  • Kim, Hyang-Kon;Choi, Chung-Seog;Kim, Dong-Ook;Chung, Hun-Sang
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2003.07a
    • /
    • pp.489-492
    • /
    • 2003
  • In this paper, we experimented on the deterioration process of power supply cords and analyzed the heating temperature of each part of those cords. We also analyzed the surface states, metallurgical structures surface structures and compositions of the wire melted by over-current. In the results of the analyses, the covering began to be deteriorated from the inside. The heating temperature of extension cord was higher than that of plug body. The dendrite structures appeared at the melted wire. By the SEM and EDS analyses, the dendrite structure showed the growth of copper oxide. We found out the characteristics of PVC insulated flexible cords by over-current from the above experiments and analyses. These results may be useful data in the analyses of deterioration causes of power supply cords.

  • PDF

Reduction of the residual stresses during the additive manufacturing of a thermo-viscoelastic growing cylinder under non-uniform volumetric heating by electric induction

  • Fekry, Montaser
    • Structural Engineering and Mechanics
    • /
    • v.82 no.2
    • /
    • pp.259-270
    • /
    • 2022
  • The paper investigates the residual stresses arising in a thermoviscoelastic cylinder as a result of layer-by-layer deposition of material on its lateral surface. Internal stresses are caused by incompatible deformations that accumulate in the assembly as a result of joining parts with different temperatures. For the analysis of internal stresses, an analytical solution to the axisymmetric quasi-static problem of thermoelasticity for a growing cylinder is constructed. It is shown that the distribution of residual stresses depends on the scenario of the surfacing process. In this case, the supply of additional heat to the growing body can significantly reduce the unevenness of temperature fields and reduce the intensity of residual stresses. The most effective is uneven heating, which can be realized, by the action of an alternating current with a tunable excitation frequency. The temperature and residual stresses fields on the growing surface is analyzed numerically for Titanium and Copper materials.

Temperature Rise During Laser Photodynamic Therapy in a Mouse Tumor Model

  • Yoon, Gil-Won
    • Journal of Biomedical Engineering Research
    • /
    • v.14 no.1
    • /
    • pp.17-22
    • /
    • 1993
  • Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided intro two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weights). The other group received no Photofrin E Mice from both groups were irradiated for approximately 15 minutes at 100,300, or $500{\;}mW/\textrm{cm}^2$ with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photofrin II increased surface temperature by at least 40% and the temperature rise due to $300{\;}mW/\textrm{cm}^2$ irradiation exceeded values for hyperthermia. Lights and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise.

  • PDF

Infrared Imaging for Screening Breast Cancer Metastasis Based on Abnormal Temperature Distribution

  • Ovechkin Aleck M.;Yoon Gilwon
    • Journal of the Optical Society of Korea
    • /
    • v.9 no.4
    • /
    • pp.157-161
    • /
    • 2005
  • Medical infrared imaging is obtained by measuring the self-emitted infrared radiance from the human body. Infrared emission is related to surface temperature and temperature is one of the most important physiological parameters related to health. Though recent applications such as security identification and oriental medicine have provided new fields of biomedical applications, infrared thermography has had ups and downs in its usages in cancer detection. Some of the main difficulties include finding proper applications and efficient diagnostic algorithms. In this study, infrared thermal imaging was used to detect regional metastasis of breast cancer. Our measurements were done for 110 women. From 63 individuals of a Healthy Group and a Benign Breast Disease Group, we developed algorithms for differentiating malignant regional metastasis based on temperature difference and asymmetry of temperature distribution. Testing with 47 cancer patients, we achieved a positive predictive value of $87.5\%$ and a negative predictive value of $95.6\%$. The results were better than for mammogram examination. A proper analysis of infrared imaging proved to be a highly informative and sensitive method for differentiating regional cancer metastasis from normal regions.

General Oceanographic Factors In Yeongil Bay Of Korea, Late October 1973 (가을철 영일만수괴의 일반해양학적 특성)

  • Kwak, Hi-Sang
    • 한국해양학회지
    • /
    • v.11 no.2
    • /
    • pp.89-95
    • /
    • 1976
  • Some factors of seawater such as water temperature, salinity, pH, dissolved oxygen and asturation of dissolved oxygen were determined in 5 meters intervals from surface to bottom at 11 stations in Yeongil Bay of Korea during late October 1973. Distribution pattern of water masses in Yeongil Bay during the period seemed to be heterogeneous as dividing into two parts of surface and bottom. Water temperature, pH, dissolved oxygen and saturation of dissolved oxygen of surface water mass showed higher values and salinity of the mass showed lower values than those factors of bottom water mass. Surface water mass might be originated from Tsushima current during summer season and bottom water mass from cold body of East Sea of Korea which seemed to extend to coastal zone during winter season. Land water discharge from Hyeongsan River into the Bay is considered as a minor factor playing slight role in the water mass composition of the area.

  • PDF