• Journal of Naturopathy
• /
• v.11 no.2
• /
• pp.152-157
• /
• 2022

Background: There have been no reports of studies on the effect of a combination of myofascial relaxation technique and passive stretching on the lower extremity body shape of working women. Purpose: This study aimed to examine the effects of myofascial relaxation technique and passive stretching on body composition and body composition analysis (intracellular fluid, skeletal muscle mass, body cell mass), etc. Methods: The subjects of this study were 30 women at a body shape management center who had many problems with their subjective lower extremity body shape. Fifteen subjects were in the experimental group and the control group. The experimental group applied the fascial relaxation technique twice a week for nine weeks. The control group conducted stretches by themselves at least twice a week according to the active stretching instructions. The ANOVA program analyzed the data. Results: In the experimental group, intracellular fluid (p < .05), skeletal muscle mass (p < .048), and body cell mass (p < .047) were significantly increased. Conclusion: The lower extremity edema of working women decreased

• Korean Journal of Human Ecology
• /
• v.11 no.1
• /
• pp.59-67
• /
• 2002

The purpose of this study was to investigate the recognition and satisfaction of the lower body shapes of male college students. The subjects in this study were 178 male college students. The results were as follows: 1. The degree of recognition and satisfaction of girth items in lower part of the body scored average. Subjects tended to be dissatisfied with their height. 2. The degree of satisfaction of waist girth and weight was influenced by the real body size than the degree of recognition. And abdomen girth, hip girth, ankle girth, leg length, hight, crotch length were affected by the degree of recognition than the real body size. 3. Subjects were more satisfied with standard lower body type than with lean and obese ones.

• Korean Journal of Human Ecology
• /
• v.4 no.2
• /
• pp.123-140
• /
• 2001

The purpose of this study is to find the suitable suit design of mid-aged men by examining visual effects in Physical and Psychological side aspects. I used convenience sampling by considering sex and age distribution. These methods were used to analyze data that were frequency analysis, variate analysis, centesimal scale, primary factor analysis, three primary variate analysis, duality variate analysis, equation variate analysis and Cronbach's multiplex range verification 1. Image perception of men's suit was analyzed with arrangement, numbers of button, pattern and the shape of one's body and was divided into charming, youthfulness, modernism. affection and manly. 2. 1) There are partly resemblance difference in physical visual effect by the shape of body and suit design. 2) There are partly resemblance differences in psychological visual effect by one's shape and suit design. In conclusion arrangement, number of button and Pattern are very important to give an effect on whole visual effect man's suit. Also, these were felt differently in each types of body Therefore it is confirmed that the type of body is important fluent to make people perceive.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.3 s.18
• /
• pp.69-76
• /
• 2004

In this paper, an efficient inverse design method for nose shape of submerged body based on the MGM(Modified Garabedian-McFadden) design method has been developed. The MGM design method is a residual-correction technique, in which the residuals are differences between the desired and the computed pressure distributions. 3-D incompressible Wavier-Stokes equation was adopted for obtaining the surface pressure distribution and combined with the MGM design method to perform the inverse design of nose shape of submerged body. The design method was verified by applying to several airfoil shapes. Improved design shapes could be obtained when the method was applied to nose shapes of submerged body.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.81-86
• /
• 2020

A ceramic vacuum chamber feedthrough ceramic insulator is made of Al2O3; the manufacturing process involves filling alumina powder into a urethane mold and pressing it with a rubber press to produce a molded body. Thereafter, manufacturing is completed through primary shape processing, sintering, and secondary shape processing in the green body, which is a pressurized molding body, This work is intended to prevent defects in the first shape processing by improving the ceramic insulator in the green body, and to improve the productivity of the ceramic insulator by determining the optimal processing conditions.

• Journal of Species Research
• /
• v.12 no.1
• /
• pp.90-94
• /
• 2023

The morphology and infraciliature of three newly recorded Aspidisca species in Korea, two collected from the eastern coast and one collected from Jeju Island, were investigated in vivo and after protargol impregnation. The three species are as follows: A. dentata Kahl, 1928, A. hexeris Quennerstedt, 1869, and A. polystyla Stein, 1859. The three species are characterized by having a "polystyla-arrangement" of frontoventral cirri: 1) A. dentata is characterized by having a broadly rotund body shape, a distinct peristomial spur, and a dorsal thorn; 2) A. hexeris is characterized by a broadly oval body shape, four projections along the left margin of body, and the single peristomial spur; and 3) A. polystyla has the broadly rotund body shape, transverse cirri each split into several parts (especially in vivo), and lacking of the peristomial spur. Among them, A. dentata and A. polystyla are poorly known and lack morphological description based on silver staining. In the present study, we provide a brief diagnosis, remarks, and photomicrographs.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.101-107
• /
• 1997

A sectional analysis of auto-body panel stamping is carried out by using the rigid-plastic FEM based on the membrane theory. The auto-body panel material is assumed to possess normal anisotropy and to obey Hill's new yield criterion and its associated flow rule. A method of contact treatment is proposed in which the skew boundary condition for arbitarily shaped tools is successively used during iteration. Deformation of each section of trunk-lid panel is simulated and composed to get the three-dimensional shape by using CAD technique. It was shown that the composition of the two-dimensional section analysis gives almost the same results as the full three-dimensional analysis.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.455-467
• /
• 2020

Shape design optimization for Blended-wing-body Underwater Gliders (BWBUGs) is usually computationally expensive. In our previous work, a simplified shape optimization (SSO) strategy is proposed to alleviate the computational burden, which optimizes some of the Sectional Airfoils (SAs) instead of optimizing the 3-D shape of the BWBUG directly. Test results show that SSO can obtain a good result at a much smaller computational cost when three SAs are adopted. In this paper, the performance of SSO is investigated with a different number of SAs selected from the BWBUG, and the results are compared with that of the Direct Shape Optimization (DSO) strategy. Results indicate that SSO tends to perform better with more SAs or even outperforms the DSO strategy in some cases, and the amount of saved computational cost also increases when more SAs are adopted, which provides some reference significance and enlarges the applicability range of SSO.

• Korean Journal of Community Nutrition
• /
• v.8 no.5
• /
• pp.658-666
• /
• 2003

This study was carried out to investigate among adolescents (total=729) the relationship between their self-esteem, body-cathexis, their attitudes toward the importance of their bodies, their anthropometric characteristics, their perceptions of their body shapes and their experiences with weight control. The results are summarized as follows: The mean values for self-esteem and body-cathexis were generally low, but these values were significantly higher among boys than girls (p<0.01-0.001). However the mean values for their attitudes toward the importance of their bodies were relatively high and were significantly higher among girls than boys (p<0.01). The mean values for Percent Ideal Body Weight (PIBW) and Body Mass Index (BMI) were normal and no significant differences between the genders were observed. The distribution of the PIBW and the BMI values showed a higher rate for normal weights among the girls and a higher rate for underweightedness and obesity among the boys (p<0.01). With regard to their perception of their body image, among the boys, their current figures were almost identical with their idea of an ideal figure, but among the girls, their idea of an ideal figure was thinner than their current figure. The girls were more dissatisfied with their own body image than the boys (p<0.001). Fifty-four percent of the subjects had previous weight control experience, and the girls had significantly more experience than the boys (p<0.001). Their main reason for practising weight control was to lose weight (65.3%) Those who had more weight control experience had lower satisfaction with their body shapes, higher PIBW, higher BMIs or currently had fatter figures. Their standard image of their figures was influenced by TV (40.3%) and friends (36.9%). There was a weakly positive correlation between their self-esteem and their satisfaction with their body shapes, and a weakly negative correlation between their satisfaction with their body shapes and their attitudes toward the importance of their bodies. These results suggest the necessity for an educational program for adolescents as to foster a positive body image. Such a program should consider psychological factors such as self-esteem, satisfaction with body shape and attitudes toward the importance of the body.

• Korean Journal of Human Ecology
• /
• v.23 no.6
• /
• pp.1191-1204
• /
• 2014

Even though a Han-bok, or traditional Korean costume, should be inherited since it is invaluable part of our culture, research on Han-bok is scarce. Since the development of a Jeogori pattern, the upper garment of Korean traditional clothes, is done mostly based on the chest size, the design does not completely consider on wearer's body shape. Moreover, unless made by an expert, trial and error is almost always necessary to improve the fit of the clothes. In this research, a Jeogori pattern was suggested that improves the fit based on the shape of the upper back(straight or bent) of a female in her late 20s who often wears a Han-bok and is comfortable when moving. Using a 3D virtual clothing system, the optimum pattern was selected based on the body shape. The final selection was made, and each subjects tried the garment on to evaluate the comfort when moving, along with its appearance, based on a seven point Likert scale. As a result, for a straight body shape, the optimum ease for the front bust width was 2.5cm, and that for the back bust width was 2.0cm. The optimum center back dart was 1.0cm. The optimum Geodae width was 7.6cm, and the optimum back Geodae point was 2.0cm. For the bent body shape, the optimum ease for the front and back bust was 2.0cm. The optimum Geodae width was 8.4cm, and the optimum back Geodae point was 1.5cm. Furthermore, if the Hwajang slope was set at half of the vertical distance between the laterals of the neck and shoulder, a fitted silhouette appeared, which is preferred nowadays. In the appearance evaluation, the final pattern designed in this research received higher scores than the original design(straight; p<.001, bent; p<.05). The results of the evaluation of the comfort when moving also showed higher scores for the final pattern that was designed.