• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.4
• /
• pp.452-460
• /
• 2016

Burkitt lymphoma (BL) is an aggressive form of non-Hodgkin's B-cell lymphoma found primarily in the pediatric population. In the oral cavity, this tumor can grow rapidly and often brings about facial swelling or development of an exophytic mass involving the jaws. A 5-year-old boy was referred for swelling and pain in the left mandibular area. The patient showed diffuse swelling on the left side of the mandible and firm-moderate tenderness upon palpation. An intraoral examination showed moderate mobility and sensitivity to percussion on the left primary first and second molars, without severe caries. A radiographic examination revealed complete loss of the lamina dura on the left primary second molar and permanent first molar. There was a radiolucent osteolytic lesion and destruction of the cortical bone of the left mandibular body. Based on the clinical, radiographic, and immunohistochemical findings, the patient was diagnosed with BL, and was referred to a pediatrician for systemic evaluation and intensive chemotherapy. Even before the completion of chemotherapy, the swelling resolved and the displaced teeth were relocated to a normal position. This patient showed a good prognosis due to prompt diagnosis and intensive chemotherapy. Early diagnosis and referral for treatment can prevent the development of BL.

• Journal of the Korean Society of Costume
• /
• v.17
• /
• pp.221-245
• /
• 1991

The purpose of the study is to search for the existene mode of the modern cosmetology by not only understanding generally but also looking into the fundamental mental base and the aesthetic senses reflected in the literatuers and remans concerned with the traditional Korean cosmetology from anient times to modern times (1910). What are characteritic of in the systemetic study are summarized as follows : Chapter I The purposes and methods are systematized and the scop of study is specified. Chapter II The definition of cosmetology and osmetic indicates that the traditional cosmetology is a sort of whole deoration with costume. Chapter III It can hypothesized that since the Koreans were the northern nomadic tribe, in the beginning the cosmetology might have had a practical usage to protect themselves from the cold weather, and then gradually become to have a decoration meaning, and finally, with the development of various social culture, undergone the transition reflecting some characteristic of each era. Chapter IV While the female cosmetology had been much likely to accomodate the spirit of the times under the male, most of the male cosmetology had been done as a means to exhibit his social position, the tendency which had been prominent in the Yi dynasty. Chapter V Sinece beauty kits which were made of raw materials had been selg-supplying only to meet the small demand, their size were relatively small and had been given a menaing of a luchy omen or exorcism. Chapter VI Buddhism introduced bathing and incense, Confucianistic view of womanhood differentiated the cosmetology between Kissang and daughters of respectable citizens, and thin make-up was recomended. In addition, there many thoughts to have influence on the traditional cosmetology culture : body-and-soul unity, exorcism, naturalism, and short-lived beauty. Chapter VII Since the on-going movement of makeing use of the traditional cosmetic materials in order to apply to modern cosmetic may be a king of counter-vertical cultural phenomena to incorporate our own tradition with the modern cosmetology culture efficiently, the hope is that the findings of the study may contribute to the said efforts. In short, the study on the traditional cosmetology culture may be heloful in Looking into the existence of the modern cosmetology through its clarification of the nature of the traditional cosmetology culture.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.1
• /
• pp.1-11
• /
• 1985

In order to clarify the taxanomic position of a new microsporidia K79 which was isolated from the silkworm larvae, Bombyx mori L. in Korea in 1979, the following several experiments such as estimation of pathogenicity in different instar, histopathological examination under light and electronic microscope and examination of fine structure of the sporse were carried out and their result obtained are as follows. In the test of pathogenicity by oral inoculation, the new microsporidia K79 was lower than Nosema bombycis and the susceptibility of the new microsporidia to silkworm was getting lower as the silkworm larvae grew. The lesion of Silkworms' tissue which was infected with the new microsporidia K79 was found in the epithelial cells of trachea, fat body and silk gland cells. The developmental process of the new microsporidia K79 in vivo could be divided into the following five stages: sporoplasm, schizont, sporont, sporoblast, and spore. The process was just the same as the of N. bombycis, but its development was slower than that of N. bombycis. Several differences in the fine structure of the spore under electron microscope, which could be important keys for the classification of microsporidia, were obtained. Anchoring disk and polaroplast lamella of the new microsporidian spore were disclosed to be different from those of N. bombycis. An average number of polar filament coils of the new microporidian spore was 16 at an angle of 75$^{\circ}$. On the basis of various keys for the classification of microsporidia, the results obtained from various experiments proved that the newly isolated microsporidia should be classified into the Genus, "Nosema", nut is further classification for species should be conducted in the future. Therefore, it may be reasonable that the new microsporidia is temperally classified as Nosema sp. K79 considering the fact that it was discovered in Korea in 1979.a in 1979.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.939-942
• /
• 2007

Vacuum cleaner is a close life product that can remove various dusts from our surroundings. However well vacuum cleaner clean our environments, many people are looking away from it, due to its loud noise. Its noise causes a big trouble in the usual life, for example, catch calls, TV watching and discussing etc. To reduce these inconveniences, noise reduction methods and systematic design of low noise vacuum cleaner are studied in this paper. At first, sound quality investigation is performed to get the noise level and quality that make people TV watching and catch calls available. Based on the European and domestic customer SQ survey result, sound power, peak noise level and target sound spectrum guideline are studied and introduced. As a second, precise product sound spectrums are designed into each part based on the sound quality result. Fan-motor, brush, mainbody, cyclone spectrums are decided to get the final target sound based on the contribution level. Fan-motor is the major noise source of vacuum cleaner. Specially, its peak sound, RPM peak and BPF Peak, cause the people nervous. To reduce these peak sounds, high rotating impeller and diffuser are focused due to its interaction. A lot of experimental and numerical tests, operation points are investigated and optimization of flow path area between diffusers is performed. As a bagless device, cyclones are one of the major noise sources of vacuum cleaner. To reduce its noise, previous research is used and adopted well. Brush is the most difficult part to reduce noise. Its noise sources are all comes from aero-acoustic phenomena. Numerical analysis helps the understanding of flow structure and pattern, and a lot of experimental test are performed to reduce the noise. Gaps between the carpet and brush are optimized and flow paths are re-designed to lower the noise. Reduction is performed with keeping the cleaning efficiency and handling power together and much reduction of noise is acquired. With all above parts, main-body design is studied. To do a systematic design, configuration design developments technique is introduced from airplane design and evolved with each component design. As a first configuration, fan-motor installation position is investigated and 10 configuration ideas are developed and tested. As a second step, reduced size and compressed configuration candidates are tested and evaluated by a lot of major factor. Noise, power, mass production availability, size, flow path are evaluated together. If noise reduction configuration results in other performance degrade, the noise reduction configuration is ineffective. As a third configuration, cyclones are introduced and the size is reduced one more time and fourth, fifth, sixth, seventh configuration are evolved with size and design image with noise and other performance indexes. Finally we can get a overall much noise level reduction configuration. All above investigations are adopted into vacuum cleaner design and final customer satisfaction tests in Europe are performed. 1st grade sound quality and lowest noise level of bagless vacuum cleaner are achieved.

• Journal of the Korean Society of Radiology
• /
• v.9 no.4
• /
• pp.257-261
• /
• 2015

Radon is produced after the Uranium-238 and thorium-232 undergone radioactive decay process is a colorless, odorless inert gas is stored in a basement or an enclosed space. Building materials are made by a rock or soil materials. Form of radon gas is introduced into the lungs through the respiratory tract and deposited in the lungs or bronchial Daughter nuclides radon causes lung cancer. In this study, To subject the Constructed Apartment in Gwangju Gwangsan-Gu, the position is closed window and opened window was measured using a measuring instrument for radon. The measured results indicate that the measurement was carried out in concentrations of radon gas measured at Newly Constructed Apartment is low than United states in the radon concentration in air public 4 pCi called radon gas baseline maximum allowable concentrations. The exposure caused by radon concentration of new construction apartment when on the measurement results is expected to be insignificant. However, when radon gas like this is that it accumulates in the body and lungs get damaged due to exposure, such as lung cancer often open the windows to reduce the radon concentration measurements, such as in radiation protection aspects to the ventilation to reduce exposure it is considered necessary.

• Korean Journal of Poultry Science
• /
• v.28 no.3
• /
• pp.267-274
• /
• 2001

The pineal gland of the bird occupies a key position in the phylogenetic evolution of this organ. Therefore, the purpose of this study was to investigate the developmental changes of the pineal gland during post-hatching period in Korean pheasant. The pheasants were sacrificed at 1-day-, 1-month-, 2-month-, and 6-month-old after hatching. The morphological characteristics of a pineal glands were determined in all pheasants using light microscope, and transmission electron microscope. Connective tissue originated from the capsule divided the pineal parenchyma into incomplete lobules. The parenchyma was consisted of pinealocytes and supportive cells. These parenchymal cells were arranged in the forms of solid lobules as well as incomplete follicles. At the follicular lumen, membraneous lamellar complexes and blob -like structures were present. Pinealocyte, a predominent cell type, had euchromatic nucleus, and showed the segmental organization. The bulbous apical portion had scanty free ribosomes and occasional cilia associated with basal bodies. The constricted neck, transitional portion from apical to pericarya had junctional complexes with adjacent supportive cells, and had microtubules. Cell body contained abundant mitochondria, well-developed Golgi complex, rough endoplasmic reticulum (RER) and free ribosomes. Basal processes extended from the base of the cell soma toward the basal lamina and contained 60∼90 nm dense cored vesicles. Supportive cells, another major type of the parenchyma, were characterized by the dense and elongated nucleus, and contained moderate number of mitochondria, RER, developed Golgi complex, free ribosomes and a few dense bodies in the perinuclear cytoplasm. Slender processes of supportive cells interposed between the pinealocytes and often bordered the basal region of the parenchyma. These results indicate that the pinealocytes of the pheasant are not rudimentary photoreceptor cells, and appear to have secretory function. Further studies will be required to confirm the morphological characteristics of pineal gland in adult pheasant during breeding and nonbreeding season.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1182-1182
• /
• 2001

In this study, the newly constructed optical measurement system, which was mainly composed of a parametric tunable laser and a near infrared photoelectric multiplier, was introduced to clarify the optical characteristics of wood as discontinuous body with anisotropic cellular structure from the viewpoint of the time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects of the cellular structure of wood sample, the wavelength of the laser beam λ, and the detection position of transmitted light on the time resolved profiles were investigated in detail. The variation of the attenuance of peak maxima At, the time delay of peak maxima Δt and the variation of full width at half maximum Δw were strongly dependent on the feature of cellular structure of a sample and the wavelength of the laser beam. The substantial optical path length became about 30 to 35 times as long as sample thickness except the absorption band of water. Δt ${\times}$ Δw representing the light scattering condition increased exponentially with the sample thickness or the distance between the irradiation point and the end of sample. Around the λ=900-950 nm, there may be considerable light scattering in the lumen of tracheid, which is multiple specular reflection and easy to propagate along the length of wood fiber. Such tendency was remarkable for soft wood with the aggregate of thin layers of cell walls. When we apply TOF-NIRS to the cellular structural materials like wood, it is very important to give attention to the difference in the light scattering within cell wall and the multiple specular-like reflections between cell walls. We tried to express the characteristics of the time resolved profile on the basis of the optical parameters for light propagation determined by the previous studies, which were absorption coefficient K and scattering coefficient S from Kubelka-Munk theory and n from nth power cosine model of radiant intensity. The wavelength dependency of the product of K/S and n, which expressed the light-absorbing and -scattering condition and the degree of anisotropy, respectively, was similar to that of the time delay of peak maxima Δt. The variation of the time resolved profile is governed by the combination of these parameters. So, we can easily find the set of parameters for light propagation synthetically from Δt.

• International Journal of Highway Engineering
• /
• v.5 no.4 s.18
• /
• pp.1-11
• /
• 2003

Recently, the new pavement design method considering Korean environment and the specification for improving performance of pavement are being developed in Korea. The Jointed Concrete Pavement Program Applying Load Discretization Algorithm (called HEART-JCP) is one of the results of Korea Pavement Research Project in Korea. HEART-JCP program is developed to analyze various loading condition using the load discretization algorithm without mesh refinement. In addition, it can be modified easily into multi-purpose concrete pavement nidyses program because of the modularized structure characteristic of HEART-JCP. The program consists of basic program part and load discretization part. In basic program part, the displacement and stress are computed in the concrete slab, sub-layer, and dowel bar, which are modeled with plate/shell element, spring element and beam element. In load discretization program part, load discretization algorithm that was used for the continuum solid element is modified to analyze the model with plate and shell element. The program can analyze the distributed load, concentrated load, thermal load and body load using load discretization algorithm. From the result of verification and sensitivity study, it was known that the loading position, the magnitude of load, and the thickness of slab were the major factors of concrete pavement behavior as expected. Since the result of the model developed is similar to the results of Westergaard solution and ILLISLAB, the program can be used to estimate the behavior of jointed concrete pavement reasonably.

• The Journal of Fisheries Business Administration
• /
• v.39 no.1
• /
• pp.87-114
• /
• 2008

The cultured tuna production which has suddenly expanded at the short time and the demand for it attract attention. Farming mode, distribution transactions, change of the market (domestic and international) and the price trend are reviewed from the Japan's position which is the biggest consuming country. This paper tries to describe the current status of the food system related to the cultured tuna. Japanese government began the development of the tuna culture technology in 1970. It was by the Fisheries Agency's project. Kinki University which is the large scale private university in Japan participated in the project. After that, 32 years have passed. Kinki University established the full farming of the bluefin tuna in August, 2002. On the other hand, in 1974, one Japanese private enterprise began its tuna farming business in Canada. Kinki University gave this company technical cooperation. Also, in the early stages of the 90s, as for the policy of the overseas fishery cooperation foundation, it supported the tuna farming business in Australia. It is very clear to understand that the long-term technological-development has supported the take-off scene of the tuna culture business not only in foreign countries but also in Japan. The total shipment scale of the cultured tuna expanded very much within about 10 recent years. However, the decrease of the wild tuna catch, the reinforcement of the fisheries regulation and the tuna body to dwarf are remarkable now. Under the condition as the mentioned above, Japan's tuna consumption, especially, in the market at the fatty meat of tuna of the cultured tuna is building up firm status. At present, the Mediterranean Sea coastal countries, Australia, Mexico and Japan have the tuna farming sites. Australia farms the southern bluefin tuna. The others do the bluefin tuna. About for 3 years, Japan farms the juvenile of the tuna. The global production areas are as follows. 8 coastal countries of the Mediterranean Sea; 18,000 tons (61 % of the cultured tuna quantity in foreign countries), Mexico; 4,500 ton (15%), Australia; 7,000 tons (24%). In 2003, Japan has 32 managements and 39 offices for tuna farming. In Japan, Kyushu and Okinawa district, the share shows itself as 80 % of the domestic production quantity. Especially, the share of Amami-oshima Island in Kagoshima Prefecture exceeds 60 %. Therefore, this island has the maximum production scale of Japan. The amount of supply of BT and SBT was 56,000 tons in 2004. In Abroad, the tuna farming business forms a fixed connection between the importer and the wholesaler which have their office in Japan. In the field of the capital composition, the payment in advance, transaction and the way of settlement, each maintains their fixed relation. The market conditions of the cultured tuna are supported by "the decline of price level" and "the expansion of the general public consumption segment". These lead a team merchandising, and it is supported by the fixed business connection of each. This makes the profit of each business which are on the cultured tuna distribution. However, they have competition on the power balance among them.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.286-291
• /
• 2014

In this study, novel ultrasonic rotary motor of hexadecagon shape stator was proposed. Stator of the hexadecagon ultrasonic motor was composed of an elastic ring and ceramics. The elastic ring had sixteen sides and sixteen angular points. Eight ceramics were attached on the outer surface of the eight sides of the ring. When rotor of cylindrical shaft was inserted inside of the ring stator, central lines of the sixteen sides of the stator hold the shaft by the slight pressures(frictions). This slight pressure was a preload of the motor and it could be controlled by radius and thickness of the ring. When two sinusoidal voltages which have 90 degree phase difference were applied to each four ceramics, elliptical displacements of inner surface of the ring were obtained. These elliptical displacements of the inner surface rotated the shaft rotor through the frictions. The proposed hexadecagon ultrasonic motor was designed and analyzed by using the finite element method (FEM), depending on materials of the elastic ring. Based on the FEM results, one model of motor which showed maximum displacement at contact points was chosen and fabricated. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, EL20ET0.5CT0.5CW2 model showed 115[rpm] speed about input voltage of 60[Vrms] at 65.6[kHz]. And the maximum torque of 6[gfcm] was obtained. From these results, the hexadecagon shaped ultrasonic motor can be used to actuator for optical device which needs detailed position control. Also it can be used to medical and portable device by reducing size and weight.