• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.06a
• /
• pp.166-172
• /
• 2000

Friction characteristics of phenolic resin-based friction composites containing threedifferent relative amounts of graphite and zirconium silicate were investigated by using a pad-on-disk type friction tester. Constant temperature test and constant interval test at three different initial temperatures(100. 200, 300$^{\circ}C$) were performed to examine the effects of friction heat on friction characteristics at elevated temperature. The friction composite(FMO.7) with higher content of ZrSiO$_4$showed unstable friction force at higher temperature and resulted in larger fluctuations of vibration during friction test. The abrasive action of ZrSiO$_4$in friction composite impeded stable transfer film and induced higher friction heat at friction interface. Friction oscillations according to the temperature were associated with the formation of transfer film(i'd body layer) on the friction composite and the counter part.

• Carbon letters
• /
• v.2 no.3_4
• /
• pp.182-191
• /
• 2001

Quinoline insoluble formed by the heat treatment was hot-pressed near its softening point. The green body was stabilized in the temperature range of $300{\sim}400^{\circ}C$ and subsequently carbonized below $1300^{\circ}C$ in an argon atmosphere. The behaviors of QI formation was examined with varying the heat treatment temperature and the lapse of time of the sample carbonized at various temperatures. And the mechanical property, corrosion resistance, and friction behavior were also measured optimum content of mesophase pitch ensured a dense structure and high $LC_{(002)}$ value, which resulted in high mechanical properties, good corrosion resistance, and low-stable friction behavior.

• Journal of the Korean Ceramic Society
• /
• v.43 no.8 s.291
• /
• pp.458-462
• /
• 2006

A simple pressing process using a SiC powder, $Al_2O_3-Y_2O_3$ sintering additive, and polymer microbeads for fabricating cellular SiC ceramics is demonstrated. The strategy for making the cellular ceramics involves: (i) forming certain shapes using a mixture of a SiC powder, $Al_2O_3-Y_2O_3$ sintering additive, and polymer microbeads by pressing; (ii) heat-treatment of the formed body to burn-out the microbeads; and (iii) sintering the body. By controlling the microsphere content and sintering temperature, it was possible to adjust the porosity in a range of 16% to 69%. The flexural and compressive strengths of cellular SiC ceramics with $\sim$40% porosity were $\sim$60 MPa and $\sim$160 MPa, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.9
• /
• pp.1293-1302
• /
• 2014

The aim of study was to determine the energy requirements for maintenance and growth of forty-one Saanen, intact male kids with initial body weight (BW) of $5.12{\pm}0.19$ kg. The baseline (BL) group consisted of eight kids averaging $5.46{\pm}0.18$ kg BW. An intermediate group consisted of six kids, fed for ad libitum intake, that were slaughtered when they reached an average BW of $12.9{\pm}0.29$ kg. The remaining kids (n = 27) were randomly allocated into nine slaughter groups (blocks) of three animals distributed among three amounts of dry matter intake (DMI; ad libitum and restricted to 70% or 40% of ad libitum intake). Animals in a group were slaughtered when the ad libitum-treatment kid in the group reached 20 kg BW. In a digestibility trial, 21 kids (same animals of the comparative slaughter) were housed in metabolic cages and used in a completely randomized design to evaluate the energetic value of the diet at different feed intake levels. The net energy for maintenance ($NE_m$) was $417kJ/kg^{0.75}$ of empty BW (EBW)/d, while the metabolizable energy for maintenance ($ME_m$) was $657kJ/kg^{0.75}$ of EBW/d. The efficiency of ME use for NE maintenance ($k_m$) was 0.64. Body fat content varied from 59.91 to 92.02 g/kg of EBW while body energy content varied from 6.37 to 7.76 MJ/kg of EBW, respectively, for 5 and 20 kg of EBW. The net energy for growth ($NE_g$) ranged from 7.4 to 9.0 MJ/kg of empty weight gain by day at 5 and 20 kg BW, respectively. This study indicated that the energy requirements in goats were lower than previously published requirements for growing dairy goats.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.12
• /
• pp.1711-1717
• /
• 2017

Objective: This experiment was studied the effects of various levels of crude glycerin (CG) in dairy goat diet on daily intake, milk yield, milk composition, some physical properties and some quality changes of goat milk after sterilization. Methods: Twelve 75% Saanen dairy goats (body weight = $49{\pm}3kg$; days in milk = $60{\pm}12d$) were randomly assigned in a completely randomized design to evaluate the effects of three experimental diets consisting of 0%, 5%, and 10% CG (dry matter basis) which were formulated to meet or exceed the nutrient requirements of goats. Experimental dairy goats were evaluated for feed and milk yield. Milk samples were analyzed for their composition, including fatty acids, casein profile, fat globule size, and color, and were sterilized to evaluate milk heat stability. Results: There were no significant differences between 0% and 5% CG treatments infeed. Increasing CG supplementation from 0% to 5% increased milk yield from $2.38{\pm}0.12$ to $2.64{\pm}0.23kg/goat/d$. In addition, milk samples from 5% CG treatment had the highest total solids, fat content and lactose content, and largest fat globule size. Increasing CG to 10% resulted in a decrease in milk fat. After sterilizing at $116^{\circ}C$, $F_0=3min$, goat milk samples from 5% CG treatment had slightly higher sediment content and comparatively higher degree of browning. Conclusion: Considering milk yield, milk fat content and quality of sterilized milk, 5% CG supplementation in a total mixed ration has a potential for implementation in dairy goats.

• The Korean Nurse
• /
• v.28 no.3
• /
• pp.68-82
• /
• 1989

This study was a quasi-experimental research study to test the characteristics of temperature regulation according to sponge bath methods of cold application. Thirteen volunteers were selected from among nursing college students according to an established criteria using a purposive sampling technique. Four different cold application methods were used: $\circled1$ tepid water sponge bath at $28^{\circ}C$, $\circled2$ 20% alcohol sponge bath at $28^{\circ}C$, $\circled3$ 40% alcohol sponge bath at $28^{\circ}C$ and $\circled4$ tepid water sponge bath at 28$^{\circ}$C plus an ice bag to the head. Changes in rectal temperature, mean skin temperature, mean body temperature, heat content change and thermal discomfort during the cold application were measured at 5 minute intervals over a 120 minute period. The data collection period was from Dec. 20, 1988 to Feb. 3, 1989. The data were analyzed using descriptive statistics, simple regression, ANOVA, Duncan's multiple range test and Pearson correlation coefficient using the SPSS-X Program. The results of the study are summarized as follows. Five general hypothesis were tested. Hypothesis 1 that "Change in heat content will be decreased for each cold application method according to the cold application time" was rejected. (tepid water sponge bath: after 10 minutes of cold application, 20% alcohol sponge bath: after 25 minutes of cold application: 40% alcohol sponge bath: after 45 minutes of cold application, tepid water sponge bath plus an ice bag to the head: after 80 minutes of cold application) Hypothesis 2 that "Thermal discomfort will be changed for each cold application method according to the cold application time" was rejected after 5minutes of cold application. Hypothesis 3 that "Change in heat content will differ among the cold application methods" was accepted except 0~5, 0~10, 0~65, 0~105 and 0~120 minute. This difference showed significance only between sponge bath methods and tepid water sponge bath plus an ice bag to the head. Hypothesis 4 that "Thermal discomfort will differ among the cold application methods" was accepted at 15, 20, 35, 45, 75, 80, 90, 95, 100, 105, 110, 115 and 120 minute of cold application time. This difference showed significance only between sponge bath methods and tepid water sponge bath plus an ice bag to the head. Hypothesis 5 that "The higher the change in heat content, the higher the thermal discomfort during the cold application time" was accepted for between 10~60 and 75 minute of cold application. In conclusion, this study showed that in sponge bath at $28^{\circ}C$, 10~80 minute was a effective cold application time in the view of heat loss through the skin. Concerning the effects of evaporation and thermal discomfort, it was found that there was no difference with regard to the solutions; tepid water sponge bath; 20% alcohol sponge bath or 40% alcohol sponge bath at a $28^{\circ}C$ controlled solution temperature. So it was thought that the type of solution itself did not have a big influence on the heat loss through skin. The combined effect of sponge bath with an ice bag to the head showed a significant difference and also showed a slight increase in thermal discomfort. On the basis of this research it can be concluded that cold application, for example, an ice bag to the head during a tepid water sponge bath is a good method as it increase heat loss through conduction, although fit can also cause a slight increase in thermal discomfort. The correlation between changes in heat content and thermal discomfort were not high. So factors other than change in heat content are considered to have an effect on the cognition of thermal discomfort.

• Journal of Animal Science and Technology
• /
• v.64 no.1
• /
• pp.84-96
• /
• 2022

The current study was conducted to evaluate the effect of calcium-enriched fatty acid supplementation on the growth performance, blood metabolites, intestinal morphology, carcass traits, and nutrient digestibility of broilers subjected to chronic heat stress. A total of 210 one-day-old broiler chicks (40.12 ± 0.25 g) were randomly allocated to one of five dietary treatments, to obtain six replicates per treatment. Broilers were subjected to chronic heat stress from day 21 to day 35, post-hatching, at 34℃ for 9 h per day. The body weight (BW) and feed intake of the experimental broilers were recorded weekly, and the average daily gain (ADG) and feed conversion ratio (FCR) were calculated accordingly. Rectal temperature was measured to compare the basal body temperatures between individuals, and blood samples were collected on days 21 and 35 to evaluate basal body temperature, serum total cholesterol, and the triglyceride content of the broilers. On days 21 and 35, one broiler from each cage (n=6) was euthanized to measure carcass trait parameters, nutrient digestibility in digesta, and intestinal morphology. On days 14, 28, and 35, the broilers fed 2.0% calcium-enriched fatty acids had higher BW (p < 0.05) than those fed the other diets. However, no differences (p > 0.05) were found in the average daily feed intake (ADFI) between dietary treatments over the 35 experimental days. On the other hand, on day 21, post-hatching, the broilers fed the 2.0% calcium-enriched fatty acid diet had improved (p < 0.05) dietary feed efficiencies compared to the other treatments. On day 28, the broilers fed the 5.0% of calcium-enriched fatty acid diet also had higher (p < 0.05) dietary feed efficiencies than those fed with the other dietary treatments. No effects (p > 0.05) on carcass weight, nutrient digestibility, intestinal morphology, or blood parameters were found between broilers fed with dietary treatments. This study demonstrated that the inclusion of an additive, containing 2.0% calcium-enriched fatty acid, to broiler diet could ameliorate the negative growth performance of broilers; and no interaction (p > 0.05) was observed between the calcium-enriched fatty acid and nutrient digestibility, digestive anatomy, blood metabolism, and carcass traits of broilers subjected to chronic heat stress conditions for 35 days post-hatching.

• Korean Journal of Metals and Materials
• /
• v.50 no.6
• /
• pp.455-462
• /
• 2012

Al-Si coated boron steel and Zn coated DP steel plates were laser-welded to manufacture a Tailor Welded Blank (TWB) for a car body frame. Hot-stamping heat treatment ($900^{\circ}C$, 5 min) was applied to the TWB weld, and the microstructural change and transformation mechanism were investigated in the Al-rich area near the bond line of the Al-Si coated steel side. There was Al-rich area with a single phase, $Fe_3(Al,Si)$, which was transformed to ${\alpha}-Fe$ (Ferrite) after the heat treatment. It could be explained that the $Fe_3(Al,Si)$ phase was transformed to ${\alpha}-Fe$ during heat treatment at $900^{\circ}C$ for 5 min and the resultant ${\alpha}-Fe$ phase was not transformed by rapid cooling. Before the heat treatment, the microstructures around the $Fe_3(Al,Si)$ phase consisted of martensite, bainite and ${\alpha}-Fe$ while they were transformed to martensite and ${\delta}-Fe$ after the heat treatment. Due to the heat treatment, Al was diffused to the $Fe_3(Al,Si)$ and this resulted in an increase of Al content to 0.7 wt% around the Al-rich area. If the weld was held at $900^{\circ}C$ for 5 min it was transformed to a mixture of austenite (${\gamma}$) and ${\delta}-Fe$, and only ${\gamma}$ was transformed to the martensite by water cooling while the ${\delta}-Fe$ was remained unchanged.

• Journal of the Korean Ceramic Society
• /
• v.31 no.6
• /
• pp.629-636
• /
• 1994

The ferrimagnetic glass-ceramics in the system Fe2O3-CaO-SiO2 for hyperthermia were investigated. Glasses could be prepared up to the content of 40 wt% of Fe2O3 and below the weight ratio of 1.0 of CaO/SiO2. The maximum saturation magnetization and the maximum coercive force were 29.85 emu/g and 340.1 Oe respectively, for a glass 40Fe2O3.20CaO.40SiO2 composition heat-treated at 95$0^{\circ}C$ for 8 hours. And for a glass 40Fe2O3.30CaO.30SiO2 composition the maximum saturation magnetization and the maximum coercive force were 18.47 emu/g and 374.4 Oe heat-treated at 1,00$0^{\circ}C$ and 90$0^{\circ}C$ for 8 hours respectively. The maximum hysteresis loss was 1,726.3 cal/g for a glass 40Fe2O3.20CaO.40SiO2 composition heat-treated at 95$0^{\circ}C$ for 8 hours. It was found that the ferrimagnetic Fe2O3.CaO.SiO2 glass-ceramics was little injurious to human body as results of biocompatibility test and biotoxicity test.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.267-274
• /
• 1992

In order to study the relationships between the contents of urinary nitrogenous compounds and energy utilization of bird, the sum of nitrogen contents of uric acid, ammonia, creatine and urea voided in excreta was estimated as the urinary nitrogen (UN) in 13-33 day-old fed or fasted White Leghorn male chicks. Energy retention and heat production of birds were determined by comparative slaughter studies. 2.75 mg of endogenous urinary nitrogen (EUn) and 2.19 mg of uric acid was excreted constantly per kJ heat production in fasted bird. One mg of UN was proportionated to 32.26 J (r = 0.999, n = 8) of the urinary energy (UE) in fed and 32.97 J (r = 0.9998, n = 8) of the endogenous urinary energy (UEn) in the fasted bird. Also relationships between 1 mg of uric acid and 38.95 J of UE (r = 0.998, n = 8) or 38.97 J of UEe (r = 0.996, n = 8) were significant (p<0.01). The EUn (r = 0.997, n = 4), uric acid (r = 0.995, n = 4) and metabolic fecal energy (FEm) plus UEe (r = 0.961, n = 4) were increased with the increase of body weight (g/bird). Metabolic fecal nitrogen (MFn) or energy (FEm), EUn and UEe per unit diet were not influenced by the age of day or body weight. The results indicated that energy and protein utilization of bird can be approximated by the relationships among urinary nitrogen, urinary energy, uric acid content in excreta and body weight of bird.