• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.883-884
• /
• 2012

This study deals with design and application of silencer to reduce the exhaust noise, especially at the low frequency range below 200 Hz which is main contribution for the bridge wing noise and the external noise of ships. The designed silencer is composed of side branch resonator, Helmholtz resonator and absorbing material. The resonating frequencies of resonators are set to be the firing order frequencies of the generator engine. Based on the on-board measurement result, it is verified that the designed silencer can effectively reduce the exhaust noise of generator engine.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.727-730
• /
• 2004

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, three types of MD-ARS, two passive and one active devices, are developed for small ships. After they are installed on the cabin of the small leisure boat, respectively, a series of test is conducted before and after operating them. Through the test, it is confirmed that the roll responses of the ship are pretty well reduced by the system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.4
• /
• pp.1122-1140
• /
• 2024

The importance of indoor positioning has grown in numerous application areas such as emergency response, logistics, and industrial automation. In ships, indoor positioning is also needed to provide services to passengers on board. Due to the complex structure and dynamic nature of ship environments, conventional positioning techniques have limitations in providing accurate positions. Compared to other indoor positioning technologies, Bluetooth 5.1-based indoor positioning technology is highly suitable for ship environments. Bluetooth 5.1 attains centimeter-level positioning accuracy by collecting In-phase and Quadrature (IQ) samples from wireless signals. However, distorted IQ samples can lead to significant errors in the final estimated position. Therefore, we propose an indoor positioning method for ships that utilizes a Deep Neural Network (DNN) combined with IQ fingerprint maps to overcome the challenges associated with accurate location detection within the ship. The results indicate that the accuracy of our proposed method can reach up to 97.76%.

• Korean Security Journal
• /
• no.41
• /
• pp.293-326
• /
• 2014

Piracy is a worldwide issue, but the deteriorating security situation in the seas off Somalia, the Gulf of Aden and the wider Western Indian Ocean between 2005 and 2012 and in the increasing number of attacks in the Gulf of Guinea are a major problem. The depth of concern for the problem internationally is amply demonstrated by the levels of co-operation and coordination among naval and other forces from several countries that have assembled in the west Indian Ocean region and the Gulf of Aden to escort ships carrying humanitarian aid to Somalia and to protect vulnerable shipping. Notwithstanding this unprecedented effort, the vast sea area in which the pirates now operate makes it difficult to patrol and monitor effectively, particularly with the limited resources available. More resources, in the form of naval vessels and aircraft, are needed and at every opportunity the IMO encourages Member Governments to make greater efforts to provide the additional naval, aerial surveillance and other resources needed through every means possible. IMO provide interim guidance and recommendations to be taken into account when considering the use of PCASP(privately contracted armed security personnel) if and when a flag State determines that such a measure would be lawful and, following a full risk assessment, appropriate. The interim guidance and recommendations of IMO are not intended to endorse or institutionalize the use of armed guards. Therefore, they do not represent any fundamental change of policy by the Organization in this regard. It is for each flag State, individually, to decide whether or not PCASP should be authorized for use on board ships flying their flag. If a flag State decides to permit this practice, it is up to that State to determine the conditions under which authorization will be granted. Therefore, Korea should be introduced rationally PCASP for safe shipping. PCASP on board ships is much the same to special guard personnel of security services industry act. Act plan of Oceans and fisheries ministry on PCASP collides with special guard personnel system of National Police Agency. Rather than new law making, PCASP regukations have to be included in security services industry act. Management Agency of PCASP is to not Oceans and fisheries ministry, but Central Headquarters Korea Coast Guard of Public Safety and Security Ministry because of specialty and closely connection.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1791-1796
• /
• 2004

Recently, great improvements have been made in developing autonomous underwater vehicles (AUVs) using stateof- the-art technologies for various kinds of sophisticated underwater missions. To meet increasing demands posed on AUVs, a powerful on-board computer system and an accurate sensor system with an well-organized control system architecture are needed. In this paper, a new control system architecture is proposed for AUV, ORCA (Oceanic Reinforced Cruising Agent) which is being currently developed by Korea Research Institute of Ships and Ocean Engineering (KRISO). The proposed architecture uses a hybrid architecture that combines a hierarchical architecture and a behavior based control architecture with an evaluator for coordinating between the architectures. This paper also proposed a sensor fusion structure based on the definition of 4 categories of sensors called grouping and 5-step data processing procedure. The development of the AUV, ORCA involving the system architecture, vehicle layout, and hardware configuration of on-board system are described.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.923-928
• /
• 2005

The estimation of fatigue life at the design stage of the compressed air tank on board is very important in order to arrive at feasible and reliable solutions considering the total lifetime of the tank. In this paper the compressed air tank on board was selected as a model and the change of inside pressure of the tank during normal navigation period was measured and the cycle of fluctuation stress was presumed statistically based on this. Also the effect of stress concentration with the FEM analysis on the longitudinal weld and the mean stress effect on the fatigue strength of compressed air tank were discussed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.125-126
• /
• 2014

현재의 안전설비기준은 정량적 관점에서 정의되었고, 선박 재난 시나리오에 관한 대응수준을 평가할 방법이 없다. 선박, 특히 여객선 승객의 안전성을 향상시키기 위해서는 설계단계 혹은 증개축단계에서 성능기반의 피난안전설계에 의한 평가를 통해 문제점을 파악하고 개선안을 제실할 필요가 있다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.1
• /
• pp.31-38
• /
• 2005

This paper is focused on the research of environmental and human factors for a design of PMVbased air conditioning system in the ship. In the results from environmental factor research, it is possible to dissatisfy thermally in the wheel house and communication room of 25 ton and engine room of 100 ton. The clothing and activity in the ship is modified using inland indoor characteristics. Thermal resistance of clothing may be more sensitive to PMV(predicted mean vote) than metabolic rate because of large deviation among maritime polices. The distribution of human factor is right long-tailed than standard normal distribution.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.167-178
• /
• 1997

It has been expected not only for crew but also for passengers to realize a ship whose rolling and other motions are small as much as possible. Restricting our consideration to the roll reduction, the conventional roll stabilization system, fins or anti-rolling tanks hve been utiized as the actuator. Excessive motions would interfere with the recreational activities of passengers on a cruise ship. Often more than half of the load of a containership is stowed above deck where it is subjected to large acclerations due to rolling. In some situations this may cause some internal damage to the contents of the containers; in more severe situations failure of the lashing can occur and containers may be lost over-board. Underdeck cargo in ordinary cargo ships and bulk commodities in colliers, ore ships and grain ships can shift if the motions become too severe. The purpose of this study is to concentrate on the additions. either internal or external to the hull, that reduce or otherwise improve the motion responses of the hull. It is assumed that the additions are such that their benefit to the motions of the ship outweights any impact on the ability of the ship to perform its assigned task. It is particularly challenging to obtain large improvements in the motion characteristics of existing ships that are being rebuilt or modified for some task not anticipated in their original design. Further the authors will statistically analyze the influence of ruder-roll-yaw coupling motion in the case of application of this advanced control method to various kinds of ship.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.59-66
• /
• 2006

This research is based on the information compiled on the occurrence of maritime casualties onboard ships registered under Central American Region (CAR) flag States. Due to nonexistence of writing reports in anyone of the countries that are integrating this Region, the information was compiled by the author through personal communication with the people involved in the casualties. The information was compiled by typing up the text and digitizing on the computer for the respective data base. For each casualty occurred, the following information was compiled, date and type of the casualty, position of the ship at the time of the casualty, dimension of the ship, number of people affected by the casualty, and cause and consequences of the casualty. Based on the number of people affected (death and disappear) by the casualties occurred was calculated the mortality rate by 100,000 persons and then compared with the Japanese mortality rate. Furthermore were analyzed the CAR maritime authorities competences and then were compared to that the Japanese counter part. In addition, the implementation rate of the International Maritime Organization (IMO) and International Labor Organization (ILO) conventions ratified by the CAR countries were analyzed. The objective of this research was to compiled and analyze the occurrences of maritime casualties happened on board the ships registered under the CAR Flag States, in order to determine the causes of these accidents. The results of the analysis enable us to better understand of the maritime safety situation of the ships that are registered under the CAR flag States. In order to reduce the occurrence of maritime casualties are proposed a series of measures based on the differences found then the comparison between CAR and Japan. Based on the results of this research, is possible to conclude that the inaccessibility of atmospheric information and the lack of safety measures onboard has been the main cause of the maritime casualties happened in the Pacific side of the CAR.