• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2006년도 춘계종합학술대회
• /
• pp.328-331
• /
• 2006

유비쿼터스 시대에 무선센서노드를 이용한 데이터 수집은 필요성이 증대하고 있다. 본 논문에서는 PIC16F877과 Bluetooth를 이용하여 데이터를 수집하고, PC에서 데이터베이스를 구축한다. PIC16F877은 무선센서노드를 제어하고, PC는 DB의 수집되는 데이터를 비교하여 제어 데이터와 테이블을 갱신하고, 노드의 센싱 주기를 지능형으로 변환시키는 알고리즘을 제안한다. 연구의 결과는 저렴하고, 실용적이며, 간단하게 시스템을 구축하여 산업현장에 적용할 수 있다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 추계학술발표대회
• /
• pp.482-484
• /
• 2015

대표적인 위치기반 기술인 GPS는 건물 내부와 같이 실내에서의 위치추정이 거의 불가능하다. 따라서 실내 측위의 방안으로 BlueTooth 4.0LE 기반의 장치인 비콘(Beacon)을 활용하여 실내 GPS의 역할을 수행하도록 하는 기법이 활용되고 있다. 그러나, 비콘의 거리측정에 사용되는 RSSI의 문제점으로 인해, 위치추정의 정확도가 급격히 저하되는 문제점을 가지고 있다. 본 논문에서는 개선된 위치선정 알고리즘을 통하여 오차율을 줄여, 정밀한 위치 추정이 가능한 알고리즘을 제안하였다.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.86-91
• /
• 2022

Two-photon fluorescence microscopy was performed on the enamel-dentin junction area of a human tooth using a femtosecond pulsed laser. We obtained a clear image contrast between the bright dentin and dark tubules with the autofluorescence generated from the endogenous fluorophores in dentin. The autofluorescence shows a broad spectrum due to complex cross links between dentinal collagens, which extend from blue to orange wavelengths (470-590 nm), but a gradual autofluorescence loss in photobleaching was observed for a long-term exposure under strong excitation. For increasing excitation power, we found that two-step decay becomes significant in the spectrally integrated autofluorescence.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 추계학술발표대회
• /
• pp.40-43
• /
• 2011

본 논문에서는 안드로이드 기반의 스마트폰에서 운전자의 운전 패턴에 따른 연료 소비량을 감소하기 위한 운전 습관을 유도하는 방법을 제안하였다. 이 시스템은 차량의 정확한 내부 상태 정보를 바탕으로 운전 상태를 스마트폰으로 제공한다. 차량의 상태정보를 추출하기 위해서 차량 네트워크인 CAN 버스를 사용하였으며, 이를 하드웨어로 구현하였다. 효율적인 ECO_Driving을 위한 차량 데이터들을 추출하여 분석하였으며, 이들 데이터를 바탕으로 운전자에게 에코여부를 제공하는 애플리케이션을 구현하였다. 이 시스템으로 경제운전으로 배기가스 감축, 에너지절약과 사고 예방을 유도할 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.130-133
• /
• 2002

사회의 발전에 따라 고령화 현상과 예전에 없던 많은 병들이 생겨나고 있다. 특히 고령환자의 경우는 건강 상태가 언제 악화될지 모르기 때문에 지속적인 관찰의 필요성에 원격 의료정보 시스템 연구가 활발히 이루어지고 있다. 생체 전위 신호의 일종인 심전도 신호는 심장 질환 보유 환자의 일상적 임상 진단 수단으로 의료 정보 시스템에 널리 사용되고 있다. 블루투스란 2.4GHz 대의 무선 주파수를 사용하는 근거리 무선 통신 기술로서 저전력 특성과 고속의 주파수 호핑 방식에 따른 높은 신뢰성 및 자체 에러 정정 기술을 지니고 있다. 이는 기존의 무선모뎀보다 데이터 전송에 있어서 높은 신뢰성을 얻을 수 있게 해준다. 또한 무선 모델은 무선 단말기 소형화에 따른 제약을 받고 있으나 블루투스를 사용함으로써 저전력 특성과 더불어 휴대용으로의 기능에 부합시킬 수 있으며, 모듈의 원칩화가 진행됨에 따라 자은 크기로의 가능성이 제시된다. 이에 따라 블루투스를 이용한 작업 중 외부로부터 입력되는 의료 정보를 블루투스 모듈이 호스트 PC에 연결된 불루투스 모듈에 무선으로 전송하고, 호스트 PC는 연결된 블루투스 모듈로부터 받은 의료 정보를 인터넷 망으로 전송하는 시스템이 구현된 바 있다. 본 연구는 기존의 시스템에서 더 나아가 호스트 PC를 임베디드화하고, Tcp/Ip 프로토콜 스택을 추가하여 의료 정보를 모두 임베디드화된 환경 하에서 웹으로 전송 할 수 있게 해준다.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.152-163
• /
• 1995

This experiment was performed to observe the adhesion pattern and microleakage in the gingival margin according to variation in the resin cement thickness which results from thickness of Die spacer. which is considered to effect the adaptability of the composite resin inlays. Clearfil CR inlays were fabricated on stone models with CR Sep applicated once and Nice fit twice, 4 times, and 6 times each. After 2nd curing within the CRC-100 oven, CR inlays were cemented with CR inlay cement. Dye(2% methylene blue) penetration and adhesion pattern were evaluated after sectioning of gingival margin into :3 pieces. The results were as follows ; 1. The thickness of resin cement showed unevenchanging pattern with that of die spacer, namely, it was increased until 4 times' application of Nice-Fit but was decreased with 6 times' application of that. 2. The degree of dye penetration wasn't affected by cement thickness within a limited value. 3. Most of dye penetration was shown through the interface between cement and enamel rather than the interface between cement and CR inlay. This shows that the affinity of resin cement for CR inlay was superior to the adhesive strength with tooth structure. 4. No gap was found at the interface between enamel and cement but some showed separation between dentin and cement. It is concidered that the contraction force of cement was less than the bond strength with the enamel. 5. Lots of voids were found in the CR inlay and resin cement. There was a pooling tendency of bonding agent and cement in the axiogingival line angle portion. 6. In some specimens, cracks were shown in enamel margin. From this it could be considered that cavity preparation and surface treatment weakened the tooth structure.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.680-692
• /
• 1997

New bonding agent systems have been supplied which operators can simply apply to conditioned tooth surfaces. The purpose of this study was to evaluate the shear bond strengths and the microleakages of three bonding agents and composite resins to dentin. Seventy-five extracted human maxillary and mandibular molar teeth were used in this study. For the shear bond strength test, the entire occlusal dentin surfaces of thirty teeth were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A). For the microleakage test, Class V cavities were prepared in the buccal surfaces of fourtyfive teeth. They were randomly assigned into 3 groups according to dentin bonding agents ($Scotchbond^{TM}$ Multi-Purpose plus, ONE-$STEP^{TM}$ and Prime & $Bond^{TM}$)and composite resins (Z-100, $Aelitefil^{TM}$ and TPH $Spectrum^{TM}$) to be used. Bonding agents and composite resins were bonded to exposed dentin surfaces of the tooth crown and to Class V cavities on the buccal surfaces respectively according to manufacturer's directions. The shear bond strengths were measured by universal testing machine($U^{TM}$ AGS-100, Japan). In addition, the degree of micro leakage at the occlusal and gingival margin was examined by 2 % methylene blue and stereomicroscope(Olymous SZH 10, Japan). The results were as follows: 1. The shear bond strength to dentin was the highest value in SBMP-Plus group($16.68{\pm}7.38$ MPa) and the lowest value in Prime & Bond group($11.61{\pm}5.82$ MPa), but there was no significant difference of shear bond strength among three groups. 2. The degree of microleakage at both occlusal and gingival margin was showed the lowest in SBMP-Plus group and the highest in ONE-STEP group. 3. At both occlusal and gingival margin, there was significant difference of microleakage between SBMP-Plus and ONE-STEP/ Prime & Bond groups(p<0.05), but no significant difference of microleakage between ONE-STEP and Prime & Bond group(p>0.05).

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.721-731
• /
• 1995

The purpose of this study was to evaluate the adaptability to tooth structure of light-cured glass ionomer cements. In this, study, class V cavities were prepared on the buccal surfaces of thirty extracted human premolar teeth, and they were randomly assigned into 3 groups with 10 teeth. The cavities of each groups were filled with the Fuji II LC(GC International Corp., Japan), Vitremer(3M Dental Products Division, U.S.A) and VariGlass VLC(Caulk/Dentsply Inc., U.S.A.). The specimens were immersed in 1% methylene blue solution and stored in 100% realtive humidity at $37^{\circ}C$ for 5 days. And then, the specimens sectioned buccolingually. Degree of eke penetration at tooth--restoration interfaces were examined by magnifying glass at occlusal and gingival margin. The results were as follows : 1. On the occlusal margin, among the experimental groups, the group 2 showed the lowest microleakage($1.40{\pm}1.17$) and the group 1 showed the highest microleakage($3.10{\pm}0.99$). There was significant difference between group 1 and group 2(P<0.01). 2. On the gingival margin, among the experimental groups, the group 2 showed the lowest microleakage($2.50{\pm}1.08$) and the group 1 showed the highest microleakage($3.50{\pm}0.84$). But there was not significant. difference among the experimental groups(P>0.05). 3. The degree of microleakage at occlusal margin was less than gingival margin in all experimental groups.

• Restorative Dentistry and Endodontics
• /
• 제21권2호
• /
• pp.559-568
• /
• 1996

The purpose of this study was to evaluate the micro leakage of composite resin when various phosphoric acid agents were used to etch the enamel and dentin. In this study, class V cavities were prepared on the buccal surfaces of fourty extracted human molar teeth, and they were randomly assigned into 4 groups with 10 teeth. The cavities of each groups were etched with 10%, 32%, 35% and 37% phosphoric acids for 15 seconds, washed and dried and the cavities were restored with composite resin after application of the adhesive. The specimens were immersed in 2% methylene blue solution for 3 days. And then, the specimens were sectioned buccoligually. Degree of dye penetration at tooth-restoration interfaces was examined by Inverted Metallurgical Microscope at the occlusal and gingival margins. The result were as follows : 1. The degree of microleakage at occlusal and gingival margin in all group was statistically difference among 10% and 35% (P<0.01), 10% and 37% (P<0.01), 32% and 35% (P<0.05) and 32% and 37% (P<0.05) acid concentrations, but was not statistically difference between 10% and 32%, 35% and 37% acid concentrations (P>0.05). The degree of microleakage was showed to dimish with increase of acid concentration. 2. The degree of microleakage at the occlusal margin was statistically significant difference among 10% and 32%,10% and 35%, 10% and 37% acid concentrations(P<0.05). The degree of microleakage among 32% and 35%, 32% and 37% and 32% and 37% acid concentrations was not statistically significant difference. 3. In comparison of microleakage at the gingival margin, the degree of microleakage above 32% acid concentration was not showed less than 10% acid concentration (P>0.05). In comparison of 32%, 35%, 37% acid concentrations, the degree of microleakage at 35% and 37% acid concentrations was showed less than 32% acid concentration(P<0.05).

• 한방비만학회지
• /
• 제21권1호
• /
• pp.32-41
• /
• 2021

Objectives: We aim to observe the relation of body mass index (BMI) and the indicators of oral health. Methods: 400 subjects participated in the study. The BMI values are calculated from the height and weight. For the tongue diagnosis, we used the tongue imaging device to analyze the color, tongue coating, and tooth marks. We measured the concentration of hydrogen sulfide (H₂S) and methyl mercaptan (CH₃SH) to evaluate the halitosis. The dry mouth was evaluated through the measurement of saliva secretion and with the questionnaire asking the frequency of dry mouth. Results: The BMI values were significantly higher in the group with light-white and blue-purple colored tongue, and significantly lower for lightly-coated tongue. However, the correlation of BMI and the amounts of saliva secretion was not significant as well as in the correlation of BMI and the concentration of H₂S, CH₃SH. In tongue diagnosis, the subjects who had blue-purple colored tongue also had significantly higher H₂S and CH₃SH, but tendency of lower saliva secretion. Conclusion: We obtain data showing that BMI value and the indicators of oral health including tongue diagnosis have meaningful correlation.