• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.564-570
• /
• 1996

급속 열산화 없이 다공성 실리콘으로부터 적색 및 청색 발광을 관찰할 수 있었다. 묽은 HF 농도에서, 특히 짧은 양극 산화 북식으로제조한 aged 된 다공성 실리콘은 청색band 의 증가를 나타내었다. 상온에서 측정된 발광 decay 시간은 약 100 ps를 나타내었고 20K에서 측정된 값에 비하여 상당히 빠른 값을 지니고 있었다. 청색 광발광 peak 최대값은 액체질소온도에서 청색전이를 나타내지 않았다. 그러나 적색 광발광 band는 77K 에서 적색으로 전이를 하였고 황색을 나타내었다. 적색 발광의 origin은 Si 결정과 연관이 있는 것으로 사료되어지는 한편 청색 발광은 Si결정과 무관한 것으로 생각되어 진다.

• The Korean Journal of Ceramics
• /
• 제2권3호
• /
• pp.137-141
• /
• 1996

Ambient air aged anodically etched porous silicon (PS) and spark-processed silicon (sp-Si) show interesting similarities and dissimilarities in some of their luminescence-related properties. Among these similarties are: (1) the photoluminescence (PL) peak maximum in the blue/violet (410 nm);(2) the blue/violet PL peak positions are essentially unchanged with temperature ; (3) PL decay times in the nanosecond region which are independent of the detection wavelength, which is much faster in decay times compared to that of observed decay time in $SiO_2$.Among the dissimilarities are: (1) the PL intensity of blue/violet luminescence, namely, the PL intensity of sp-Si is at least 2 orders of magnitude larger than that of an ambient air aged PS; (2) the blue/violet PL intensity of sp-Si is more stable than that of ambient air aged PS under UV illuminations; (3) FTIR spectra of sp-Si favor those modes, which involve silicon -oxygen bonds in $SiO_2$ stoichiometry, whereas ambient air aged PS can be considered as a nonstoichiometric oxide judging from the observed vibrational spectra.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.419-422
• /
• 2009

The luminescence intensity of calcium sulfide codoped with $Eu^{2+},\;Si^{4+}\;and\;Ga^{3+}$ was investigated as a function of the dopant concentration. An enhancement of the red luminescence resulted from the incorporation of $Si^{4+}\;and\;Ga^{3+}\;into\;CaS:Eu^{2+}.\;The\;non-codoped\;CaS:Eu^{2+}$ converted only 3.0% of the absorbed blue light into luminescence. As the $Si^{4+}\;and\;Ga^{3+}$ were embedded into the host lattice, the luminescence intensity increased and reached a maximum of Q = 10.0% at optimized concentrations of the codopants in CaS. Optimized CaS:$Eu^{2+},Si^{4+},Ga^{3+}$ phosphors were fabricated with blue GaN LED and the chromaticity index of the phosphor-formulated GaN LED was investigated as a function of the wt% of the optimized phosphor.

• The Korean Journal of Ceramics
• /
• 제4권1호
• /
• pp.28-32
• /
• 1998

This paper reports on photoluminescence (PL), luminescence decay curves, and compositional analysis of porous silicon(PS) which is aged under air ambient by Fourier transform infrared vibrational spectroscopy (FTIR) and by Auger electron spectroscopy (AES). Porous silicos which has been aged under air ambient yields two PL band structures, i.e. blue/violet PL and red PL. The evolution of a blue/violet band is pronounced, especially for thin PS film which is prepared in dilute HF solution. The blue/violet PL band has been observed initially to increrase rapidly with aging, then saturated with further atmospheric aging. The ambient air aged PS exhibits a fast decay time of sub-nanosecond at room temperature and shows appreciably faster decay time than that at 20K. Atmospheric aging of this thin blue/violet luminescing PS yield non-stoichiometric oxide judging from the vibrational spectra of Si-O and AES analysis.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.75-76
• /
• 2007

ZnS:Cu,Cl phosphor was coated by solid-gel reaction with $SiO_2$ outside layer. The effect of $Cu^{2+}$-doping concentration has been investigated on the luminescence characteristics of ZnS:Cu,Cl blue-green phosphors for inorganic electro luminescent device. Also, SiO2 coated layers' effect on luminescence characteristics. Evaluation of luminescence characteristics dependent on the synthesis conditions is important to get high-performance phosphors properties. EL and PL properties such as luminescence intensity and chromaticity of ZnS:Cu,Cl phosphors synthesized with different concentration of activator, $Cu^{2+}$, were analysed separately

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.112-113
• /
• 2007

ZnS:Cn,Cl phosphor was coated by solid-gel reaction with $SiO_2$ outside layer. The effect of $Cu^{2+}$ -doping concentration has been investigated on the luminescence characteristics of ZnS:Cn,Cl blue-green phosphors for inorganic electro luminescent device. Also, SiO2 coated layers' effect on luminescence characteristics. Evaluation of luminescence characteristics dependent on the synthesis conditions is important to get high-performance phosphors properties. EL and PL properties such as luminescence intensity and chromaticity of ZnS:Cn,Cl phosphors synthesized with different concentration of activator, $Cu^{2+}$, were analysed separately

• 한국재료학회지
• /
• 제19권5호
• /
• pp.281-287
• /
• 2009

ZnO thin film was grown on a sapphire single crystal substrate by plasma assisted molecular beam epitaxy. In addition to near band edge (NBE) emissions, both blue and green luminescences are also observed together. The PL intensity of the blue luminescence (BL) range from 2.7 to 2.9 eV increased as the amount of activated oxygen increased, but green luminescence (GL) was weakly observed at about 2.4 eV without much change in intensity. This result is quite unlike previous studies in which BL and GL were regarded as the transition between shallow donor levels such as oxygen vacancy and interstitial zinc. Based on the transition level and formation energy of the ZnO intrinsic defects predicted through the first principle calculation, which employs density functional approximation (DFA) revised by local density approximation (LDA) and the LDA+U approach, the green and blue luminescence are nearly coincident with the transition from the conduction band to zinc vacancies of $V^{2-}_{Zn}$ and $V^-_{Zn}$, respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제14권1호
• /
• pp.24-27
• /
• 2013

In this paper, we investigated the effect of luminescence properties of various concentrations of magnesium-doped ZnS:Mn phosphor excited by plasma luminescence device. The PL intensity was evaluated in the range of 300~500 nm excitation wavelengths. We found the highest PL intensity of the phosphors excited by 365 nm and 450 nm was observed at Mg concentrations of 1.4 wt% and 0.8 wt%, respectively. In addition, an emission peak was distinguished at 580 nm wavelength. With increasing Mg dopant level, enhanced PL intensity was observed, which is possibly applicable to color converting materials by blue emission for white light sources. Finally, we evaluated the luminance properties of color converting ZnS:Mn,Mg phosphors with plasma blue light source. the white luminance of plasma light source with CIE(0.36,0.26) was established by color converting phosphors of ZnS:Mn with 0.8 wt% Mg.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.358-363
• /
• 2017

In this study, we present a detailed investigation of luminescence properties of a blue light-emitting diode using InGaN/GaN (indium component is 17.43%) multiple quantum wells as the active region grown on patterned sapphire substrate by low-pressure metal-organic chemical vapor deposition (MOCVD). High-resolution X-ray diffraction (HRXRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman scattering (RS) and photoluminescence (PL) measurements are employed to study the crystal quality, the threading dislocation density, surface morphology, residual strain existing in the active region and optical properties. We conclude that the crystalline quality and surface morphology can be greatly improved, the red-shift of peak wavelength is eliminated and the superior blue light LED can be obtained because the residual strain that existed in the active region can be relaxed when the LED is grown on patterned sapphire substrate (PSS). We discuss the mechanisms of growing on PSS to enhance the superior luminescence properties of blue light LED from the viewpoint of residual strain in the active region.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.530-531
• /
• 2013

3 MeV protonirradiated SrTiO3 (STO) single crystal exhibits a blue and green mixed luminescence. However, the same proton irradiated STO deposited with very thin Pt layer does not show any luminescence. This Pt layer involved in preventing the damage caused by arcingthat comes from tens of kV surface voltage build-up due to secondary electron induced charge up at the surface of insulator during ion beam irradiation. It implies that luminescence of ion irradiated STO originated from the modified STO surface layer caused by arcing rather than direct ion beam irradiation effect. Atmospheric pressure plasma, a simple and cost-effective method, treated STO also exhibits the same kind of blue and green mixed luminescence as the ion beam treated STO, because this plasma also creates a surface damage layer by arcing.