• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.590-596
• /
• 2019

To improve the color gamut of a liquid-crystal display (LCD), we propose a bandpass filter that is added to the backlight unit to optimize the backlight spectrum. The bandpass filter can only transmit red, green and blue light in the visible range, while reflecting the unwanted light. We study the optical properties of the bandpass filter using the transfer-matrix method, and the effect of the bandpass filter on the color gamuts of LCDs is also investigated. When a bandpass filter based on a 5-layer configuration comprising low and high refractive indices ((HL)²H) is used in phosphor-converted white-light-emitting diode (pc-WLED), K₂SiF₆:Mn⁴⁺ (KSF-LED), and quantum-dot (QD) backlights, the color gamuts of the LCDs improve from 72% to 95.3% of NTSC, from 92% to 106.7% of NTSC, and from 104.3% to 112.2% of NTSC respectively. When the incident angle of light increases to 30°, the color gamuts of LCDs with pc-WLED and KSF-LED backlights decrease by 2.9% and 1% respectively. For the QD backlight, the color gamut almost does not change. When the (HL)²H structure is coated on the diffusion film, the color gamut can be improved to 92.6% of NTSC (pc-WLED), 105.6% of NTSC (KSF-LED), and 111.9% of NTSC (QD). The diffusion film has no obvious effect on the color gamut. The results have an important potential application in wide-color-gamut LCDs.

• Journal of Environmental Science International
• /
• v.17 no.8
• /
• pp.899-905
• /
• 2008

Quality test for activated carbon(AC) filter used for drinking water purifier is now an obligatory test and the standard material for valid purifying amount in water purifier performance test has been changed from residual chlorine to chloroform according to the notice of Ministry of Environment in 2006. Therefore, this study aimed to compare the ingredients of AC filters by confirming chloroform removal rate of AC filter and conducting 4 adsorption tests (Iodine, methylene blue decolorization, phenol value, ADS value) for AC filters provided by manufacturers. With water pressure of $1kgf/cm^2$, 1,500 liters of prepared inflow went through to check chloroform removal rate. As a result, product with removal rate of below 60% from all products. On the other hand, 4 adsorption tests were conducted for filters in the market and filters from manufacturers. None of the products satisfied all 4 tests. In particular, they showed great shortage to the standard in phenol value and ADS value test. However, manufacturers' filter showed much better performance than filters in the market. Also, the result of valid purifying amount test for each of five products of appropriate product and inappropriate product based on filter quality test showed average 4,440 liters for appropriate product and average 2,620 liters for inappropriate product. According to the result, it is shown that the filter with good adsorption also had good chloroform removal efficiency and adsorption efficiency. Therefore, it is expected that customers can screen good quality product through obligatory conduct of filter quality test. However, it is considered that complementation in system is required for future inspection.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.767-773
• /
• 2008

This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.101.5-101
• /
• 2001

A linear input/output data-based predictive control with integral action is developed. The control input is obtained directly from the input/output data in a single step. However, the state estimation in subspace identification gives a biased estimate and there is model mismatch when the controller is applied to a nonlinear process. To overcome such difficulties, we add integral action to a linear input/output data-based predictive controller by augmenting the integrated white noise disturbance model and use each of best linear unbiased estimation(BLUE) filter and Kalman filter as a stochastic observer for the unmeasured disturbance. When applied to a continuous styrene polymerization reactor the proposed controller demonstrates.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.357-358
• /
• 1996

Reanalysis of the observations of Mars made at the Hida Observatory in 1975 with a new image processing method is reported. Red filter images taken in the period before vernal equinox (areocentric longitude of the sun Ls=$0^{\circ}$) revealed dark surface features at the northern high latitudes, while blue filter images taken at the same time showed the extensive polar hood. The latitude of the northernmost feature observed was about $67^{\circ}$N. An extensive north polar cap, which is predicted by most of the existing models and observed with Viking, did not exist in our reanalyzed images obtained at the Hida Observatory in 1975.

• 보존과학연구
• /
• s.11
• /
• pp.1-9
• /
• 1990

The environmental controls for good conservation of all textile materials are follow as :1) Special RH conditions on textiles keep to the usually advocated 50∼55%.2) The effect of the temperature is too small to worry about in the applicable range, that is $20^{\circ}C$.3) It is important to keep soiling by air borne dirt to a minimum by an air filter or putting textiles in cases.4) Sulphur dioxide must be rekoved by an activated carbon filter or a water spray. And this concentration below $50\muGm^3$ can be regarded assatisfactory.5) Oxygen plays a part of deterioration proceses. The effect of nitrogend andinert gases in sealed show cases should be further studied.6) Ozone is detrimental to textiles. It can be removed by activated carbonfilter.7) The removal of UV radiation and blue light can be expected to increase the lifetime of dyeing and strength of fiber.50 lux is suggested for sensitive textile materials.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.164-170
• /
• 2009

The dependences of color gamut size and power consumption on the area ratio of the neutral and green subpixels for the RGB-LED-backlight RGBW LCD were studied, in which the red- and blue-subpixel areas are the same and represent one-quarter of the pixel aperture area. It was found that the color saturation of the RGBW LCD can be improved through the use of a smaller neutral- and green-subpixel area ratio, at the expense of higher power consumption.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.1
• /
• pp.3-8
• /
• 1985

A three dimensional vision is obtained by stereoscopic view using a modified commercial TV set and matching color filter glasses. Two video signals from two CCTV cameras are connected to the RGB (red, green, blue) inputs of picture tube selecting two different colors for two video signals. A synchronizing signal drives a CCTV camera and the color TV set. On the other hand, a delayed synchronizing signal drives the other CCTV camera shifting its image on display. This shift is used in correcting image distortion.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1073-1076
• /
• 2009

The dependences of color gamut size and power consumption on the area ratio of neutral and green sub-pixels for the RGBW LCD with RGB LED backlit are studied, in which the areas of red and blue sub-pixels are the same and are one quarter of pixel apertu re area. It is found that high color saturation and power saving can be achieved for the proposed RGBW LCD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1398-1415
• /
• 1996

Instead of using three charge-coupled devices (CCDs) for the corresponding color channels, most consumer's most consummer's color macmorders reconstruct color images by using only one CCD with a color filter array (CFA), which periodically samples different color signals. By this reson the resulting image cannot produce the full resolution of the input image. More sepecifically, a single-CCD color camcorder reconstructs red, greed, and blue color channels from a color filter array followed by a CCD. During the reconstruction process, color cross-talk among channels (interchannel distortion) and eriodically space-verying blur (intrachannel distortion) occur. The proposed restoration system reduces distortions due to interchannel interference, and then restores each color channel by removing the corresponding intrachannel distortion. Experimental results show that the proposedsystem provides the improved image in oth objective and subjective senses. A major advantage of the proposed system is feasible to real-time image improvement because it can be implemented by a finite impulse response (FIR) filter structure.