• 제목/요약/키워드: Blue Tooth

검색결과 132건 처리시간 0.025초

Colorimetric evaluation of white spot lesions following external bleaching with fluoridation: An in-vitro study

  • Choi, Yoon-Young;Lee, Dong-Yul;Kim, Yae-Jin
    • 대한치과교정학회지
    • /
    • 제48권6호
    • /
    • pp.377-383
    • /
    • 2018
  • Objective: This study was performed to investigate the effects of external tooth bleaching with flouridation on the appearance of white spot lesions (WSLs) in vitro. Methods: In total, 125 bracket-bonded bovine incisor enamel blocks with artificial WSLs were randomly divided into a control group and four treatment groups (home bleaching, home bleaching + fluoridation, in-office bleaching, and in-office bleaching + fluoridation). A spectroradiometer (SR) and digital images (DIs) were used to evaluate colorimetric parameters (Commission Internationale l'Eclairage $L^*a^*b^*$) for all specimens. Color measurements were obtained before WSL formation (T1), after WSL formation (T2), and after completion of the external tooth bleaching treatment (T3). Results: The SRbased color change after bleaching was significantly greater in the treatment groups than in the control group (p < 0.05). SR-based lightness ($L^*$) and redgreen ($a^*$) values were significantly higher at T2 than at T1 (p < 0.001), with no significant changes in yellow-blue ($b^*$) values. At T3, SR-based $L^*$ values had increased while $a^*$ and $b^*$ values had decreased in the treatment groups (p < 0.001). The DI-based color difference between the sound enamel and WSL areas (DE*DI) increased significantly from T1 to T2 in all groups (p < 0.001) and significantly decreased from T2 to T3 in the treatment groups (p < 0.001). No significant differences in ${\Delta}E^*DI$ at T3 were shown between the four treatment groups (p > 0.05). Conclusions: The findings of this study suggested that external tooth bleaching with fluoridation can alleviate the conspicuity of WSLs.

고압산소요법이 재식치아 치주조직치유에 미치는 영향 (THE EFFECTS OF HYPERBARIC OXYGEN THERAPY ON PERIODONTAL WOUND HEALING OF REPLANTED RAT TOOTH)

  • 정일영;김광철;이긍호
    • 대한소아치과학회지
    • /
    • 제24권1호
    • /
    • pp.41-57
    • /
    • 1997
  • The present study investigated the effects of hyperbaric oxygen therapy on periodontal wound healing of replanted rat tooth. 80 rats (Sprague-Dawley strain) weighting $130{\pm}5gm$ were selected and divided into experimental and control group, each group consisting of 40 rats. Rats were administered 0.4% ${\beta}$-aminoproprionitrile for 5 days to achieve gentle tooth extraction. The maxillary first molars were extracted under anesthesia with pentobarbital, washed in sterile distilled water, treated with bacterial collagenase to remove collagen fibers on the root surfaces. After washing in water overnight, the mesial root surface were demineralized by application of citric acid, washed, dried and stored at $4^{\circ}C$. Immediately after tooth extraction and bleeding control, the treated molars extracted previously from other rats were replanted. The experimental group was exposed to hyperbaric oxygen at 2.5 atm. for 2 hrs. a day during experimental period. Eight animals of each group were sacrificed 1, 3, 6, 8, 10 days after reimplantation of teeth by intracardiac perfusion with 4% paraformaldehyde. The replanted molars and surrounding tissues were cut, demineralized, dehydrated and embedded in paraffin. Sections were stained with azan, toluidine blue and hematoxylin. Some other sections were stained by means of immunostaining achieved by the avidinbiotin complex method. The results as follows; 1. Experimental group showed fast healing of gingival epithelium. 2. Macrophage and newly formed blood vessels appeared early in the gingival connective tissue of experimental group. 3. Experimental group showed fast, abundant fibroblast proliferation and regularity of collagen fiber. 4. In both group, collagen was distributed along the collagen fiber. The distribution was strong and regular in the experimental group. 5. In the regenerated periodontal ligament of experimental group, fibers showed regular arrangement and invaded root surface fast.

  • PDF

Periodontal ligament proliferation and expressions of bone biomolecules upon orthodontic preloading: Clinical implications for tooth autotransplantation

  • Phutinart, Sasathorn;Krisanaprakornkit, Suttichai;Makeudom, Anupong;Suzuki, Boonsiva;Suzuki, Eduardo Yugo
    • 대한치과교정학회지
    • /
    • 제50권3호
    • /
    • pp.188-196
    • /
    • 2020
  • Objective: Preservation of the periodontal ligament (PDL) is vital to the success of tooth autotransplantation (TAT). Increased PDL volumes and facilitated tooth extraction have been observed upon orthodontic preloading. However, it is unclear whether any changes occur in the expressions of bone biomolecules in the increased PDL volumes. This study aimed to determine the expressions of runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), receptor activator of nuclear factor kappa-B ligand (RANKL), and osteoprotegerin (OPG) in PDL upon preloading. Methods: Seventy-two premolars from 18 patients were randomly assigned to experimental groups that received a leveling force for 1, 2, or 4 weeks or to a control unloaded group. Following extraction, PDL volumes from 32 premolars of eight patients (21.0 ± 3.8 years) were evaluated using toluidine blue staining. The expressions of the biomolecules in the PDL from 40 premolars of ten patients (21.4 ± 4.0 years) were analyzed via immunoblotting. Results: The median percentage of stained PDL was significantly higher at 2 and 4 weeks after preloading than in the unloaded condition (p < 0.05). The median RUNX2 and ALP expression levels were significantly higher at 2 and 4 weeks after preloading than in the unloaded condition (p < 0.05), whereas the median RANKL/OPG ratios were significantly higher at 1 and 4 weeks after preloading (p < 0.05). Conclusions: Orthodontic preloading for 4 weeks enhances PDL volumes as well as the expressions of RUNX2, ALP and the RANKL/OPG ratio in the PDL, suggesting this loading period is suitable for successful TAT.

수종의 치과용 스캐너로 채득된 3차원 치아 모형의 반복측정 안정성 평가 연구 (A Study on the Evaluation of Repeated Measurement Stability of 3D Tooth Model Obtained by Several Dental Scanners)

  • 배은정;김원수;임중연
    • 한국콘텐츠학회논문지
    • /
    • 제21권5호
    • /
    • pp.996-1003
    • /
    • 2021
  • 연구의 목적은 치과용 스캐너의 반복측정 안정성 비교를 통해 영향을 미치는 스캐너의 요소를 평가하는 것이다. 연구 목적을 달성하고자 청색광을 사용하는 I사의 스캐너와 광학 방식을 사용하는 Z사의 스캐너 그리고 백색광을 사용하는 D사의 스캐너를 본 연구의 반복측정 안정성 연구에 사용하였다. 측정 결과는 root mean square (RMS)로 계산하였고 one-way ANOVA 통계기법을 적용하여 유의수준을 확인하였다(𝛼=.05). 통계분석 결과 가장 큰 RMS 값을 가지는 스캐너는 Z-opt 그룹으로 38.2 ㎛이었다. 다음으로는 D-white가 35.2 ㎛로 나타났고, 가장 RMS 값이 적은 그룹은 I-blue 그룹으로 34.1 ㎛이었다. 각 그룹간에 RMS 평균을 비교한 결과는 유의하지 않은 것으로 나타났다(p>.05). 이 결과로부터 청색광, 백색광 그리고 광학 방식의 스캐너에서는 반복측정 안정성에서 청색광의 오차가 가장 낮은 것으로 나타났으나 통계적 유의성은 없었다. 연구결과 임상적 허용 가능하다는 것이 본 연구의 결론이다.

표면 처리방법에 따른 복합레진의 미세누출에 관한 실험적 연구 (A STUDY ON MICROLEAKAGE OF COMPOSITE RESIN AFTER SURFACE TREATMENT)

  • 이창우;김정욱;이상훈
    • 대한소아치과학회지
    • /
    • 제25권1호
    • /
    • pp.103-115
    • /
    • 1998
  • Adhesion of composite resin to tooth structure has been of tremendous signgicance in clinical dentistry. Due to the lack of adhesion between composite restorative resins and enamel and dentin, microleakage occurs at the tooth/restoration interface. This may lead to discoloration, secondary caries, marginal breakdown, postoperative sensitivity, and even pulpal pathology. According to extensive use of composite resin, every effort on improving bonding strength and reducing microleakage between a tooth and composite resin has been continued. This study was conducted to determine the difference in microleakage in enamel and dentin treated with air-abrasion, acid etching and combination when restored with composite resin. Class V cavities were prepared on 30 premolars. The specimens were divided into following groups. group 1:air-abrasion+Scotchbond Multi-purpose group 4 :air-abrasion+All-Bond 2 group 2:acid etching+Scotchbond Multi-purpose group 5 :acid etching+All-Bond 2 group 3:combination+Scotchbond Multi-purpose group 6 :combination+All-Bond 2 #combination:air-abrasion + acid etching The specimens were filled with Z-100 after application of Scotchbond Multi-purpose and All-Bond 2. Thermocycling was conducted by alternately dipping the specimens in $5^{\circ}C$ and $55^{\circ}C$ water for 30 seconds 500 times. 1% methylene blue was applied and the specimens were left for 24 hours at $37^{\circ}C$. After washing out the dye, the tooth was sectioned buccolingually along the axis. The sectioned surface was observed with stereoscope for dye penetration. The author has measured the microleakage in teeth prepared with air-abrasion, acid ethching and combination to study the difference in microleakage following different methods of tooth surface treatment and has come to following results. 1. In comparing microleakage between groups, group 1 and 4 showed statistically significant difference from group 2, 3, 5 and 6(p<0.05). There was no significant difference among group 2, 3, 5, 6(p>0.05) nor between group 1 and 4(p>0.05). 2. In comparing microleakage among tooth surface treatment methods, Air-abrasion group showed significantly more microleakage than acid etching group and combination(airabrasion + acid etching) group(p<0.05). Combination(acid etching+air-abrasion)group tended to show lesser microleakage than acid etching group, but this was not statistically significant(p>0.05). 3. In comparing microleakage between bonding agents, there was no statistically significant difference between Scotch bond Multi-purpose and All-Bond 2(p>0.05).

  • PDF

치과용 스캐너의 광원에 따른 디지털 모형의 정확도 비교연구 (Comparative study of accuracy of digitized model fabricated by difference optical source of non-contact 3D dental scanner)

  • 김재홍;이정수;심정석
    • 대한치과기공학회지
    • /
    • 제39권4호
    • /
    • pp.227-233
    • /
    • 2017
  • Purpose: The purpose of this study was to evaluate the validity of digital models fabricated by difference optical source of non-contact 3D dental scanner. Methods: A master model with the prepared upper full arch tooth was used. Stone model(N=10) were produced from master model, and on the other hands, digital models were made with the 3D dental scanner(Blue, white, red optical source). The linear distance between the reference points were measured and analyzed on the Delcam $Copycad^{(R)}$ graphic software. The results were statistically analyzed using the one-way ANOVA and Tukey's HSD test(${\alpha}=0.05$). Results: There were considerable differences in mean values between optical source within each color(blue, white, red), and this difference was not statistically significant(p>0.05). Conclusion : Three different color of dental scanner optical source showed clinically acceptable accuracies of full arch digital model produced by them. Besides, these results will have to be confirmed in further clinical studies.

치수조직의 석회화구조물 형성에 관한 실험적 연구 (A STUDY ON THE CALCIFICATION IN THE TRANSPLANTED DENTAL PULP OF THE RATS)

  • 이인숙;이정식
    • Restorative Dentistry and Endodontics
    • /
    • 제11권1호
    • /
    • pp.89-95
    • /
    • 1985
  • The intact dental pulps which were free of their tooth bud from adult rat incisors, and oral mucosa were transplanted subcutaneously in homologous rats to study the formation of calcified tissue. The rat were sacrificed after 1,2,3 and 4 weeks following transplantation of dental pulp and oral mucosa. The samples which contained the transplanted and surrounding tissue were fixed in 10% NBF, stained with hematoxylin and eosin, alizarin red S, von Kossa, and alcian blue. Microscopic examinstins revealed as follows: 1. The transplanted oral mucosas were not calcified but tended to form the epithelial cysts. 2. At 1 week after transplantation of dental pulp the calcified structures were appeared at the periphery of the transplantation of dental pulp but weakly reacted to alizarin red S, von Kossa, and alcian blue. 3. At 2 weeks after transplantation of dental pulp the calcified structures began to expand from the periphery to the center of the transplanted dental pulp and occupied the large areas comparatively, and strongly reacted to alizarin red S, and von Kossa stains. 4. At 3 weeks after transplantation of pulp tissue the fibrous components were grown at the periphery of the transplanted pulp tissuesand at 4 weeks a large amount of fibrous tissues were observed. The transplanted pulp tissue tended to form foreign bodies gradually.

  • PDF

증령에 따른 치아색조 변화 (Changes of tooth color in adults by aging)

  • 이정준;김길수;민관식;안승근;박찬운
    • 구강회복응용과학지
    • /
    • 제19권2호
    • /
    • pp.69-74
    • /
    • 2003
  • The purpose of this study was to obtain the color change information for natural tooth of all age groups. Fifty Korean subjects(25 men and 25 women) were randomly selected for this study. They were ranged in age from 24 to 67 years old and were classified into 5 age groups for each sex: 20 to 29, 30 to 39, 40 to 49, 50 to 59, 60 to 69 years. Maxillary central incisor of each subject free from obvious discoloration and restorations on the sites to be measured was selected. Three sites on the labial surface, incisal, middle, cervical area were measured and a circular area of 1.0mm in diameter was measured at each site by the spectrophotometer. The obtained results of this study were as follows: 1) Natural tooth color showed a significant decrease in linghtness($L^*$) at the cervical site(P<0.05). 2) Red/green chromaticity($a^*$) showed a significant increase at all sites(P<0.01). But it was not enough to have a statistic significance among three sites by aging. 3) Yellow/blue chromaticity($b^*$) showed an increase at all sites(P<0.05). But it didn't change significantly among three sites by aging.

Polystyrene 이장재가 아말감 변연부 미세누출에 미치는 영향 (THE EFFECT OF THE POLYSTYRENE LINER ON MICROLEAKAGE OF AMALGAM RESTORATION)

  • 이경선;노병덕;윤태철
    • Restorative Dentistry and Endodontics
    • /
    • 제23권2호
    • /
    • pp.586-596
    • /
    • 1998
  • Amalgam is one of the most commonly used dental restoration material because of its convenience, economic and physical properties. But microleakage in the tooth and amalgam interface has been its major problem, and many efforts have been made to overcome this shortcoming. The purpose of this study is to compare the effect of various liners on microleakage of amalgam restoration. Cavities were prepared on the buccal or lingual surface of ninety sound, extracted human premolars and six different liners (Tubulitec$^{(R)}$, Superbond D-liner II Plus$^{(R)}$, Superbond D-liner II Plus$^{(R)}$ with polymer, Scotchbond Multipurpose Plus$^{(R)}$, Copalite$^{(R)}$, No liner) were unapplied according to manufacturer's instructions and amalgam had been condensed immediately. The specimens were thermocycled by dipping in methylene blue dye at $5^{\circ}C$ and $55^{\circ}C$ for 1500 cycles. The amalgam-tooth interface was examined under stereobinocular microscope and the dye penetration was scored. The results were as follows : 1. The Tubulitec$^{(R)}$ group showed less microleakage than no liner or Copalite$^{(R)}$ group (p<0.01). 2. The Tubulitec$^{(R)}$, Superbond D-liner II Plus$^{(R)}$, Superbond D-liner II Plus$^{(R)}$ with polymer and Scotch bond Multipurpose Plus$^{(R)}$ groups were not significantly different. 3. The Copalite$^{(R)}$ and Scotchbond Multipurpose Plus$^{(R)}$ groups were not significantly different. Using the polystyrene liner and resin liners under admixed type of high-copper amalgam restoration significantly reduced microleakage in the tooth-amalgam interface. Further clinical studies on polystyrene liner are recommended.

  • PDF

경인지역 근로자의 자기평가 구강건강수준 인식에 관한 연구 (A Study on the Differences in Self-perceived Oral Health Levels in Workers at Seoul-Inchon Area)

  • 김숙향;홍민희
    • 한국산학기술학회논문지
    • /
    • 제12권12호
    • /
    • pp.5692-5699
    • /
    • 2011
  • 생산직과 사무직 간 구강건강수준에 관한 인식의 차이와 이에 관련되는 변수를 파악하고자 만 20세 이상의 생산직 근로자 200명과 사무직 근로자 100명을 편의 추출하여, 2011년 3월 1일 부터 2011년 3월 30일 사이에 설문지 조사를 실시하고, SPSS VERSION 19.0으로 분석하였다. 구강건강수준의 인식에는 3가지 하위요인으로 신체적, 심리 사회적, 정신적 요인이 존재함을 요인분석을 통하여 확인할 수 있었다. 심리사회적 요인의 경우 연령별, 근무형태별 차이가 있었다. 생산직의 정신적 요인을 제외한 직종 간 차이 없이 신체적, 심리사회적, 정신적요인의 구강건강수준의 인식은 양적 관계를 나타냈다. 직종 간 구강건강수준의 인식에 영향을 미치는 변수는 생산직의 경우 4변수에 의하여 51%, 사무직의 경우 시린 치아 1변수에 의해 30% 설명될 수 있었다. 따라서 구강건강수준의 인식이 생산직과 사무직의 근로자 간 다르다는 것을 시사한다. 그러므로 직종 간 구강건강증진사업은 차별화 되어야 하며, 근로자는 자신들의 치아 상태에 관심을 가지고 있으면서도 예방을 위한 행위에는 매우 소홀한 경우가 많으므로 개인의 예방지향적인 계속구강건강관리 사업을 통하여 구강건강증진을 실천해야한다.