• 제목/요약/키워드: Blue LED

검색결과 594건 처리시간 0.025초

발광다이오드를 이용한 디지틀 캔들 개발 (Development on the Digital Candle Using LED)

  • 소병문;강성준;오성훈;이동휘
    • 한국산학기술학회논문지
    • /
    • 제11권11호
    • /
    • pp.4291-4295
    • /
    • 2010
  • 본 논문은 독립적으로 발광다이오드의 캔들 컬러를 제어하는 발광다이오드 조명 데코레이션 시스템을 제안한다. 적색, 녹색, 청색 발광다이오드를 사용하여 발광다이오드 캔들 제어에 제안된 프로세스를 적용하였으며 캔들에 발광다이오드와 광섬유를 적용하여 스위치 부품을 사용하지 않고 캔들 내부의 광원을 발광시키는것이 가능하여 개발 결과를 상용화 하고자 한다.

Analysis of Color Uniformity of White LED Lens Packages for Direct-lit LCD Backlight Applications

  • Joo, Byung-Yun;Ko, Jae-Hyeon
    • Journal of the Optical Society of Korea
    • /
    • 제17권6호
    • /
    • pp.506-512
    • /
    • 2013
  • Recently, the color separation issue of wide-spreading white LEDs has attracted attention due to their wide applicability as light sources in direct-lit LCD backlights. These wide-spreading LED packages usually consist of LED chips, a color-conversion phosphor layer, and a light-shaping lens. The technical aspect of this color issue was related to a method for balancing the yellow spectral component emitting from phosphors with respect to the blue one from the LED chip as a function of viewing angle. In this study, we suggested an approach for carrying out quantitative analysis for the color separation problem occurring in wide-spreading LED packages by optical simulation. In addition, the effect of an internal scattering layer on the color uniformity was investigated, which may be considered as a potential solution for this problem.

선택적 충전방식 전하펌프를 사용한 LED 램프 조광구동 기술 (Driving Method for Dimming of LED Lamps using Selectively Charged Charge Pump)

  • 김재현;윤장희;염정덕
    • 조명전기설비학회논문지
    • /
    • 제27권9호
    • /
    • pp.15-22
    • /
    • 2013
  • A new LED lamp driving technology with a charge pump instead of a conventional DC-DC converter is proposed. The proposed driving technology is used to control the LED lamp with digital dimming. The power loss in the zener diodes is reduced because the charging process of the capacitors is selectively controlled according to the digital control signal. From the experimental results, when dimming four LED lamps simultaneously, the average driving circuit efficiency of 89% is obtained, regardless of the dimming level. White light with color temperature over a range of 2800~7200K was produced by dimming control of red, green, blue and amber LED lamps with the proposed driving circuit. The characteristics of the driving circuits can be changed depending on the characteristics of the R, G, B, and A LED lamps. The efficiency of the driving circuits up to a maximum 89% can also be obtained depending on the combination of LED lamps. The driving technology with digital dimming control for LED lamps proposed in this paper would be effective for obtaining high efficiency in LED driving circuits and remote control of LED lamps using digital communications.

유로피움-활성화 칼슘 알루미늄 실리케이트 형광체 연구 (Study of Europium-activated Calcium Aluminium Silicate Phosphors)

  • 황정하;박주석;장보윤;남산;김준수;유순재
    • 한국전기전자재료학회논문지
    • /
    • 제19권11호
    • /
    • pp.1020-1024
    • /
    • 2006
  • Europium$(Eu^{2+}\;or\;Eu^{3+})$-activated calcium aluminium silicate phosphors were synthesized for the first time and the structures and luminescence characteristics of these phosphors were investigated. The phosphors in this study emitted blue, green, and even red light depending on the starting milterials and annealing conditions for synthesis. In addition, the structure was also changed when the different starting materials were used. When $CaCO_3$ was used as a starting material, tetragonal $Ca_2Al_2SiO_7$ was formed. However, pure green light was emitted when the annealing was conducted in reduced atmosphere and red one was emitted by annealing in air. In the case of $CaSiO_3$ as a starting material, triclinic $CaAl_2Si_2O_8$ was formed and only pure blue emission was observed. Moreover, this blue phosphor exhibited higher intensity than that of commercial YAG:Ce phosphor, which showed the possibility of application on the phosphor for new light source such as a UV-LED.

LED 조명의 색이 평사 사육 갈색 산란계의 산란성적, 계란 품질 및 혈액과 난관 내 번식 호르몬 농도에 미치는 영향 (Effect of LED Light Colors on Egg Production, Egg Quality and Reproductive Hormone Concentrations of Plasma and Oviduct in Brown Laying Hens Housed on Floor)

  • 김희나;고한서;장현수;강유현;서지수;강환구;오상집
    • 한국가금학회지
    • /
    • 제45권4호
    • /
    • pp.245-252
    • /
    • 2018
  • 본 연구는 LED 조명의 색(파장)이 평사에서 사육하는 갈색 산란계의 생산성, 계란의 품질, 난황 콜레스테롤, 혈액 및 난관 $17{\beta}$-에스트라디올과 프로게스테론의 농도에 미치는 영향을 알아보기 위하여 수행하였다. 각각 적색, 청색, 녹색, 백색의 LED 조명색으로 총 4처리를 두었고, 47주령 갈색 산란계 144수를 처리당 4반복(칸), 반복당 9수로 배치한 후 6주간 시험을 진행하였다. 파장이 긴 적색 조명 그룹의 산란율이 가장 높았으며, 이 그룹의 혈중 $17{\beta}$-에스트라디올의 분비 농도도 가장 높았다. 반면 파장이 짧은 녹색 조명 그룹의 산란율이 가장 낮았으나, 난중은 가장 무거운 것으로 나타났다. 또한 LED 조명의 색은 난각 색, 난각 강도, 호우 유닛(HU)과 난황 내 콜레스테롤 함량에도 영향을 미치고 있음을 확인할 수 있었다. 따라서 본 연구를 통해 광원으로서 LED 조명의 경우 조명의 색(파장)이 산란 및 번식대사에 비슷하게 작용함을 확인하였다. 또한 이미 충분한 성 성숙이 완료되고, 산란율이 감소하기 시작하는 주령에도 광 자극이 산란 및 번식 대사에 영향을 미치고 있음을 알게 되었다. 본 연구의 결과로 산란성적, 계란 품질, 번식 호르몬 분비를 고려할 때, 평사에서 사육하는 47주령의 갈색 산란계에 적색 LED 조명이 가장 유리하다는 점을 제안할 수 있게 되었다.

Effect of Light Emitting Diode on Growth and Flowering of Oriental Melon (Cucumis melo L. var makuwa Makino)

  • Shin, Y.S.;Lim, Y.S.;Lee, M.J.;Han, Y.Y.;Park, S.D.;Chae, J.H.
    • 한국유기농업학회지
    • /
    • 제19권spc호
    • /
    • pp.203-205
    • /
    • 2011
  • Investigation on oriental melon was carried out for 30 minutes starting at 7 PM every day from March 21 to May 24 to find out the effect of light emitting diode on seedling quality, grafting, growth and flowering of oriental melon. According to the result of the investigation, plant height was longer in Blue, Infrared, Red+Blue and Red treatment and leaf number was higher in Blue, Red+Blue and Infrared treatment than those of control. No big difference was identified between control and Yellow, Green, Ultraviolet treatments. Grafting rate was high in Green, Red+Blue and Green treatment. The number of flower every week in control was nine, the number was almost 1 higher in White and Ultraviolet A treatments, but it was 1 to 4 lower in the rest of treatments. The number of female flowers of control was 10, however, it was 21 in Infrared treatment, 17 in White, 15 in Ultraviolet, 13 in Red+lnfrared, 12 in Blue and Red+Blue, 11 in Yellow and 8 in Green.

Transparent Conducting Zinc-Tin-Oxide Layer for Application to Blue Light Emitting-diode

  • 김도현;김기용
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.346.2-346.2
    • /
    • 2014
  • To use the GaN based light-emitting diodes (LEDs) as solid state lighting sources, the improvement of light extraction and internal quantum efficiency is essential factors for high brightness LEDs. In this study, we suggested the new materials system of a zinc tin oxide (ZTO) layer formed on blue LED epi-structures to improve the light extraction. ZTO is a representative n-type oxide material consisted of ZnO and SnO system. Moreover, ZTO is one of the promising oxide semiconductor material. Even though ZTO has higher chemical stability than IGZO owing to its SnO2 content this has high mobility and high reliability. After formation of ZTO layer on p-GaN layer by using the spin coating method, structural and optical properties are investigated. The x-ray diffraction (XRD) measurement results show the successful formation of ZTO. The photoluminescence (PL) and absorption spectrum shows that it has 3.6-4.1eV band gap. Finally, the light extraction properties of ZTO/LED chip using electroluminescence (EL) measurement were investigated. The experimental and theoretical analyses were simultaneously conducted.

  • PDF

Electrochemical Potentiostatic Activation & Its Application for Enhancing blue LED Efficiency

  • 김봉준;김학준;이영곤;백광선;이준기;김진혁
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2010년도 춘계학술발표대회
    • /
    • pp.56.1-56.1
    • /
    • 2010
  • A novel electrochemical potentiostatic method has been examined in order to enhance the hole concentration of p-type GaN thin films using KOH and HCl electrolyte. The hole concentration was increased more than 2 times by the electric voltge apply with the mobility of $10{\sim}12cm^2/V.s$. At optimum condition of 3V apply, hole concentration was enhanced more than reference sample from $1.7{\times}10^{-17}cm^{-3}$ to $4.1{\times}10^{-17}cm^{-3}$. Application of this activation method to blue-LED fabrication improved optical output from 18.4mW to 20.6mW, that is ~12% increase. SIMS analysis indicates that nearly 70% of hydrogen atoms could be removed by this method.

  • PDF

The polymerization rate and the degree of conversion of composite resins by different light sources

  • Ryoo, Joo-Hee;Kwon, Hyuk-Choon
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
    • /
    • pp.565-566
    • /
    • 2003
  • The clinical performance of light polymerized composite resins is greatly influenced by the quality of the light curing unit used. Commonly used halogen light curing units(LCUs) have some specific drawbacks such as decreasing light output with time. To overcome this, the blue LED LCUs are newly developed and introduced. The purpose of this study was to observe the reaction kinetics and the degree of polymerization of composite resins when cured by different light sources and to evaluate the effectiveness of the blue LED LCUs compared with conventional halogen LCUs.(omitted)

  • PDF

졸-겔법을 이용한 LED용 형광체의 합성 (Synthesis of Phosphor for Light-Emitting Diodes by Sol-Gel Method)

  • 안중인;한정화;박정규;김창해
    • 한국재료학회지
    • /
    • 제14권10호
    • /
    • pp.749-753
    • /
    • 2004
  • In this study, we attempt to synthesize the $Sr_{3}SiO_{5}:Eu$ yellow phosphor by sol-gel technique. Based on the blue emitting diodes as primary light source, white light emitting diodes have been manufactured using the $Sr_{3}SiO_{5}:Eu$ yellow phosphor as the luminescent material. Luminescent efficiency of yellow phosphor as well as that of blue LED is very important factor to enhance the luminescent efficiency of white LED. In order to improve the luminescent efficiency, we have synthesized the $Sr_{3}SiO_{5}:Eu$ phosphor by sol-gel technique. To research optimum condition of gelation reaction, the ratio of $H_{2}O$ to TEOS was fixed as 60:1. When the drying temperature was at $100^{\circ}C$, emission intensity was better than at $70^{\circ}C$. The critical $Eu^{2+}$ concentration was estimated to be about 0.05 mol and sintering temperature at $1300^{\circ}C$ was indicated best emission intensity.