• 한국초지조사료학회지
• /
• 제13권2호
• /
• pp.99-104
• /
• 1993

With a purpose of finding out the effects of phosphatic fertilizer application at the grassland establishment and management on the dry matter yield and quality of grasses, a field experiment was arranged with four treatments as a randomized complcte block design and lasted from September, 19 89 to October, 1991 in hilly area near Suwon. The results obtained are summarized as follows: 1. As a early plant growth. winter hardiness. growth vigour and coverage of grasses of the plots with phosphatic fertilizer were better than those of the plots without $P_2O_5$. and the effect of application at the management was much better than that at the establishment of grassland. 2. The effect of phosphatic fertilizer on DM yield of legume was higher than of grass. Total DM yield with phosphatic fertilizer at the only establishment (5.688 kg/ha). at the only management (8.014 kg/ha) and at both the establishment and management of grassland (1 1,082 kg/ha) was much more increased by 38, 95 and 169% than that without phosphatic fertilizer (4.1 19 kg/ha), respectively. 3. The chemical component of crude protein and crude fat with phosphatic fertilizer was a little higher, on the other hand, content of NFE was lower than that without $P_2O_5$ fertilization, but the contents of crude fiber and crude ash did not tend to differentiate between treatments. 4. Production of encrgy(TDN, StE and NEL) with phosphatic fertilization at the establishment and the management of grassland was appeared to increase by 34 to 390h and 72 to 99% than that without $P_2O_5$, respectively. Production of curde protein with $P_2O_5$ tended to be similar to production of energy.

• 전자공학회논문지CI
• /
• 제45권3호
• /
• pp.142-148
• /
• 2008

복호된 영상의 블록 경계에서 발생하는 왜곡을 보정하기 위해 사용된 H.264/AVC 표준의 디블록킹 필터는 개선된 품질의 영상을 제공하지만, 이에 사용되는 복잡한 필터링 연산은 복호기의 처리 시간을 지연시키는 주된 요인이 되고 있다. 본 논문에서는 이러한 필터링 연산을 더 빠르게 수행할 수 있는 명령어를 제안하고 ASIP을 구성하여 디블록킹 필터를 가속하였다. LISA를 이용하여 MIPS 기반의 기준 프로세서를 설계하고 디블록킹 필터 모델을 시뮬레이션하여 제안하는 명령어 적용에 따른 실행 사이클의 성능 향상을 비교하였으며, 설계된 기준 프로세서를 CoWare의 Processor Designer를 통해 HDL을 생성하고 Synopsys의 Design Compiler를 이용하여 TSMC 0.25um 공정으로 합성하고 제안하는 명령어를 추가할 경우에 대해 면적 및 동작 지연시간 등을 비교하였다. 합성 결과, 제안하는 명령어 셋을 적용함에 따라 면적 및 동작 지연시간에서 각각 7.5%와 3.2%의 증가를 보였으며, 이로 인해 실행 사이클 면에서는 평균 18.18%의 성능 향상을 보였다.

• 복식
• /
• 제17권
• /
• pp.137-148
• /
• 1991

The use of bark cloth, made of the inner bark of certain trees, was widespread along tropical zones from the Africa to the Hawaii encompassing the globe. They include Malaysia, Indonesia, New Guinea, Polynesian Islands and South America. Among them the Hawaiian bark cloth, named Kapa(pronounced as tapa) was rated as the best quality and most admired. It has variety in designs and colors as well as the most sophistcated production methods. The distinct processes of kapa making are composed of two stages. The first is called first beating and it is a preparatory stage to beat the sea-water soaked bast. It was done with a round beater on a stone anvil. The second beating process was carried out with the squared beater and wooden anvil. The strips from the first beating was soaked again in the water and then beaten lightly to break up fibers. The craftmen laid a bundle of strips over the anvil and beat it into pieces of kapa. The second beater of Hawaii was the most characteristic one among bark cloth producing countries. On their surfaces were the engraved patterns, which were creation of theirs. These distinguished designs enabled them to produce the kapa with the thinner and finer texture and an elaboration of impressed designs known as "watermaks". The Hawaiian culture was self-sufficient one : Everything they used was of their own creation until 19th century. Among their inventions of printing designs on kapa are three most important and distinguished processes. They are the overlaying, the cord snapping and the block printing techniques. Their inventiveness as well as self sufficient environment made it possible to develop their fine art of the kapa making. It is said that the mass producing and cheap western technology of loom forced them to gradually abandon their traditional art and as a result this fine and valuable legacy of Hawaiian traditional kapa making technique is all but disappeared. However it is encouraging and heart warming to find that some of the people as well as specialized researchers pined together to form a group to try to reproduce the old kapa and study the traditional art. They consider the kapa as an expression of the ethnic identity with Hawaii's heritage as well as valuable art of human history.

• 한국초지조사료학회지
• /
• 제18권3호
• /
• pp.217-222
• /
• 1998

This experiment was carried out to investigate effects of herbicide application method on Calysteria jcqoonica control and corn yield at the forage experimental field, grassland and forage crops division, National Livestock Research Institute, RDA, Suwon from 1996 to 1997. The experiment was arranged in a randomized block design with three replication. The herbicide application consisted of control, 2~3 leaf stage(Dicamba), 5~6 leaf stage(Dicamba) and soil treatment (Pendimethalin). The hybrid of corn used in this experiment was P 3352. The results obtained are summarized as follow; 1. The plant height was the lowest at control and the highest at Dicamba treatment in 5~6 leaf stage, but no significant difference was found among herbicide application method at ear height. Tasseling and silking date were delayed 2~3 day at control. The length and weight of ear were highest at Dicamba treatment in 2~3 leaf stage. 2. The herbicide injury of corn was very slightly after 10-20 day, but corn was recovered soon. The weed control value was 94.2~67.5% at herbicide application plot. 3. The fresh and dry matter yield of Dicamba treatment in 2-3 leaf stage was highest as 42,878 and 16,033kg/ha, respectively. The application of Dicamba increased the DM yield of corn by 13~30%. 4. Herbicide application time had little effect on the ADF, NDF and CP contents, but the forage quality of ear was higher than that of stover. The result of this experiment indicate that the application of Dicamba in 2~6 leaf stage of corn will remove almost all of Calysreria jqonica and increase DM yield of com.

• 한국초지조사료학회지
• /
• 제18권3호
• /
• pp.235-242
• /
• 1998

This experiment was carried out to determine agronomic characteristics, nutritive value and yield (DM, CP) of Winter Rye as affected by different slurry application on the basis of N contents respectively and was arranged as a randomized complete block design with seven treatments (chemical fertilizer 160kg Nha, cattle sluny 160 . 320 480kg Nha, swine slurry 160 . 320 480kg Nha) and conducted at National Livestock Research Institute, RDA, in Suweon 6om Sep. 1996. to Apr. 1997. The results obtained are summarized as follows : Plant height and leaf length was influenced by slurry application, was orderly ranked cattle sluny 480kg N1 ha > chemical fertilizer 160kg Nha > swine slurry 480kg Nha. Tiller number was increased with cattle slurry application, especilly, the effect of cattle slurry 480kg Nha was obvious but plot of swine slurry tended not to be regular. Crude protein content of rye increased as slurry application level was increased (p< 0.05), but not significant difference was found ADF and NDF content of rye. RFV(Re1ative Feed Value) of rye as affected by slurry application was classified as Grade 2 in all treatments at harvest, according to the forage quality standard assigned by AFGC. Dry matter yield was shown fiom 4,006 kgha to 8,037 kgha as affected by cattle slurry application, in the case of swine slurry application was shown ffom 4,594 kgha to 6,230 kgha (p< 0.05).

• 한국융합학회논문지
• /
• 제11권10호
• /
• pp.81-88
• /
• 2020

본 연구의 목적은 증강현실 기술을 기반으로 상악 우측 중절치의 치아 형태 조각의 반복 실습이 가능한 콘텐츠를 개발하는 것이다. 치아 형태의 단계별 실습을 위해, 1단계부터 16단계까지의 단계별 실습스토리 보드에 의한 근심, 원심, 협면, 설면의 특징을 반영한 단계별 치아 조각 형태를 삼차원 모델링 하였다. 이 자료가 학습자의 모바일 기기 화면상에 출력될 수 있도록 단계별 이미지 마커를 인식하여, 증강현실 어플리케이션으로 사용할 수 있도록 제작하였다. 이를 통해 학습자는 치아 형태 조각 연습을 반복적으로 수행해 완성도 높은 상악 우측 중절치를 조각할 수 있었다. 이 콘텐츠를 이용하여 치아 형태학 강의실 수업과 치의학 입문자의 실습이 함께 연계되어 치아 형태 조각 능력 향상에 기여하고자 한다.

• 한국항공우주학회지
• /
• 제42권7호
• /
• pp.535-543
• /
• 2014

비세장형, 둥근 앞전을 가지고 스팬이 1.0m로 축소된 BWB형 UCAV에 대해 완전난류, 천이 모델을 사용하여 전산해석을 수행하였다. 자유류는 받음각 -4도부터 26도까지 50m/s이며, 평균 시위 기준 레이놀즈수는 $1.25{\times}10^6$이다. 멀티블록 6면체 격자와 함께 완전난류 모델과 천이 모델의 결과를 비교하여 천이효과가 공력 특성에 미치는 영향을 살펴보았다. 풍동 실험과 비교한 결과 양/항력 계수는 해석범위 내에서 잘 일치하였으며, 피칭 모멘트는 높은 받음각에서 작게 예측됨과 동시에 난류모델에 따라 결과가 크게 달라졌다. 압력분포와 skin friction line, 축 방향 속도장을 이용하여 와류구조의 거동과 천이현상이 미치는 영향을 살펴본 결과, 천이효과를 고려하는 것이 UCAV의 정확한 와류 구조와 공력특성 예측에 필요한 것으로 확인하였다.

• 한국산업정보학회논문지
• /
• 제22권2호
• /
• pp.27-34
• /
• 2017

가장 간단한 샘플링을 위한 목적으로 SPL (Smoothed Projected Landweber)기법 기반의 움직임 보상 블록 압축센싱 기법이 모든 센싱 프레임들에 대해 분산 압축 비디오 센싱 기술이 적용되는 효과적인 방안으로 연구되어 오고 있다. 그러나 기존의 움직임 보상 블록기반의 압축센싱 기법은 매우 간단하여 복원된 위너-지브 프레임에서 우수한 화질을 제공하지 못하는 한계점이 있다. 본 논문에서는 기존의 움직임 보상 블록기반의 압축센싱 기법을 이용한 위너-지브 프레임에서 우수한 화질을 제공될 수 있도록 알고리즘을 변형한다. 즉, 제안된 알고리즘은 참조 프레임이 연속적인 프레임들에 있어 시간적 상관관계에 기초해서 적응적으로 선택되도록 하는 방법으로 설계된다. 다양한 실험 결과를 통하여 제안한 알고리즘은 기존의 알고리즘에 비해 우수한 화질을 제공할 수 있음을 확인한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권4호
• /
• pp.1457-1470
• /
• 2015

In wireless multimedia sensor networks (WMSN), the latency of transmission is an increasingly problem. With the improvement of resolution, the time cost in image and video compression is more and more, which seriously affects the real-time of WMSN. In JPEG system, the core of the system is DCT, but DCT-JPEG is not the best choice. Block-based DCT transform coding has serious blocking artifacts when the image is highly compressed at low bit rates. APBT is used in this paper to solve that problem, but APBT does not have a fast algorithm. In this paper, we analyze the structure in JPEG and propose a parallel framework to speed up the algorithm of JPEG on GPU. And we use all phase biorthogonal transform (APBT) to replace the discrete cosine transform (DCT) for the better performance of reconstructed image. Therefore, parallel APBT-JPEG is proposed to solve the real-time of WMSN and the blocking artifacts in DCT-JPEG in this paper. We use the CUDA toolkit based on GPU which is released by NVIDIA to design the parallel algorithm of APBT-JPEG. Experimental results show that the maximum speedup ratio of parallel algorithm of APBT-JPEG can reach more than 100 times with a very low version GPU, compared with conventional serial APBT-JPEG. And the reconstructed image using the proposed algorithm has better performance than the DCT-JPEG in terms of objective quality and subjective effect. The proposed parallel algorithm based on GPU of APBT also can be used in image compression, video compression, the edge detection and some other fields of image processing.

• 정보과학회 논문지
• /
• 제44권6호
• /
• pp.581-586
• /
• 2017

웹 문서를 자동으로 수집하면 대량의 정보를 손쉽게 모을 수 있다. 이러한 정보 수집 과정을 위해 웹 문서에서 메뉴, 광고 등 불필요한 정보를 제거하고 본문을 자동으로 추출할 필요가 있다. 특히 한국어 웹문서는 영어권과 달리 메타데이터가 포함된 경우가 드물고 디자인이 복잡하여 한국어 웹에 맞는 자동 본문 추출 방법이 필요하다. 기존의 본문 추출 방법은 주로 본문 블록의 문자적, 구조적 특성을 활용한다. 시각적 특성을 처리하기 위해서는 렌더링, 이미지 처리 등에 많은 계산이 필요하기 때문이다. 이 논문에서는 HTML에서 태그 위치를 준-시각적 특성으로 활용한 새로운 본문 추출 방법을 제시한다. 태그 위치는 텍스트의 길이에 따라 가변적이기 때문에 태그 서열 위치라는 특성을 개발하였고, 이를 경사 부스팅과 함께 이용하면 정확한 본문 추출이 가능함을 보인다. 본 논문의 연구 결과는 텍스트 분석에 필요한 양질의 문서 자료를 다양한 형태의 웹페이지에서 자동으로 수집하는 데에 쓰일 수 있다.