• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.603-606
• /
• 2003

This study was carried out to investigate the effects of T-P concentrations in irrigation water on the growth, yield, and grain quality of rice. It acquire fundamental knowledges to set up irrigation water quality standards. The pot experiment was conducted with 5 treatments using irrigation waters. It consisted of various total phosphorus concentrations(control, 1, 2, 5, 10mg/L) and replicated four times with randomized block design. The results of this study showed that as T-P concentrations in irrigation water increases, plant height tended to increase. Dry weight of rice plant at T-P 10mg/L was significantly higher than the control. However, T-P in irrigation water did not affect plant height, tiller number, plant dry weight, yield, and quality of rice.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.551-554
• /
• 2003

This study was carried out to investigate the effects of the pH of irrigation water on the growth, yield, and grain quality of rice. It acquire fundamental knowledges to set up irrigation water quality standards. The pot experiment was conducted with 5 treatments using irrigation waters with various pH values(control, 4, 6, 8, 10) and replicated four times with randomized block design. The results of this study showed that the uptake of N, P, and K, Ripened grain ratio and yield of rice tended to be reduced at the irrigation water of pH 4 and pH 10. P uptake, Ripened grain ratio and yield of rice at pH 4 water were significantly lower than the control. K uptake at pH 10 water was significantly lower than the control. Plant height, SPAD value and protein content of rice were not affected by the pH of irrigation water.

• Journal of Korean Society for Quality Management
• /
• v.28 no.2
• /
• pp.39-56
• /
• 2000

${\overline{X}}$ control chart has proven to be an effective tool to improve the product quality. Shewhart charts assume that the observations are independent and normally distributed. Under the presence of positive autocorrelation and severe skewness, the control limits are not accurate because assumptions are violated- Autocorrelation in process measurements results in frequent false alarms when standard control chats are applied in process monitoring. In this paper, Threshold Bootstrap and Moving Block Bootstrap are used for constructing a confidence interval of correlated observations. Monte Carlo simulation studies are conducted to compare the performance of the bootstrap methods and that of standard method for constructing control charts under several conditions.

• ETRI Journal
• /
• v.33 no.3
• /
• pp.454-457
• /
• 2011

In this letter, we propose a new quality measurement method to identify the causes of video quality degradation for IP-based video services. This degradation mainly results from network performance issues and video compression. The proposed algorithm identifies the causes based on statistical feature values from blocky block distribution in degraded IP-based videos. We found that the sensitivity and specificity of the proposed algorithm are 93.63% and 91.99%, respectively, in comparison with real error types and subjective test data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.2
• /
• pp.77-88
• /
• 1993

This paper shows the methods about an improvement of the sound quality, which is improvement for automobil market recently. Especially, the rumble noise in the passenger compartment makes driver uncomfortable. For an improvement of the rumble noise, in this paper, the increase of the number of balance weight of the crank shaft(from 4 to 8), the vibration constrainer of cylinder block and the flexible flywheel were applied to power plant. Among those kinds of applications, the application of the flexible flywheel to power plant makes not only the vibration of the engine mount boss reduce most effectly but also the interior noise. It also improves the sound quality and the rumble noise disappears in the passenger compartment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.605-616
• /
• 2020

The construction quality control of hull blocks is of great significance for shipbuilding. The total station device is predominantly employed in traditional applications, but suffers from long measurement time, high labor intensity and scarcity of data points. In this paper, the Terrestrial Laser Scanning (TLS) device is utilized to obtain an efficient and accurate comprehensive construction information of hull blocks. To address the registration problem which is the most important issue in comparing the measurement point cloud and the design model, an automatic registration approach is presented. Furthermore, to compare the data acquired by TLS device and sparse point sets obtained by total station device, a method for key point extraction is introduced. Experimental results indicate that the proposed approach is fast and accurate, and that applying TLS to control the construction quality of hull blocks is reliable and feasible.

• Journal of Broadcast Engineering
• /
• v.20 no.1
• /
• pp.153-163
• /
• 2015

This paper proposes a rain detection and removal algorithm that is robust against camera motion in video sequences. In detection part, the proposed algorithm initially detects possible rain streaks by using intensity properties and spatial properties. Then, the rain streak candidates are selected based on Gaussian distribution model. In removal part, a non-rain block matching algorithm is performed between adjacent frames to find similar blocks to the block that has rain pixels. If the similar blocks to the block are obtained, the rain region of the block is reconstructed by non-local means (NLM) filter using the similar neighbors. Experimental results show that the proposed algorithm outperforms the previous works in terms of subjective visual quality of de-rained video sequences.

• Radiation Oncology Journal
• /
• v.33 no.3
• /
• pp.242-249
• /
• 2015

Purpose: The purpose of this study is to compare the dosimetry of electron beam (EB) plans and three-dimensional helical tomotherapy (3DHT) plans for the patients with left-sided breast cancer, who underwent breast conserving surgery. Materials and Methods: We selected total of 15 patients based on the location of tumor, as following subsite: subareolar, upper outer, upper inner, lower lateral, and lower medial quadrants. The clinical target volume (CTV) was defined as the area of architectural distortion surrounded by surgical clip plus 1 cm margin. The conformity index (CI), homogeneity index (HI), quality of coverage (QC) and dose-volume parameters for the CTV, and organ at risk (OAR) were calculated. The following treatment techniques were assessed: single conformal EB plans; 3DHT plans with directional block of left anterior descending artery (LAD); and 3DHT plans with complete block of LAD. Results: 3DHT plans, regardless of type of LAD block, showed significantly better CI, HI, and QC for the CTVs, compared with the EB plans. However, 3DHT plans showed increase in the $V_{1Gy}$ at skin, left lung, and left breast. In terms of LAD, 3DHT plans with complete block of LAD showed extremely low dose, while dose increase in other OARs were observed, when compared with other plans. EB plans showed the worst conformity at upper outer quadrants of tumor bed site. Conclusion: 3DHT plans offer more favorable dose distributions to LAD, as well as improved target coverage in comparison with EB plans.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9C
• /
• pp.869-875
• /
• 2006

Nowadays JPEG encoder uses block based DCT and quantization to compress the size of still image. JPEG encoding method performs better compression efficiency than the other still image encoding method. However, when encoding a still image at low bit-rate, high frequency coefficients could be lost because of the coarse quantization so the blocking artifacts occur. In this paper, we propose the method of eliminating the blocking artifacts which occur when the still image is encoded by JPEG at a high compression rate. The principle of proposed algorithm is that the eliminating the blocking artifacts, which occur in the boundary of blocks, in DCT domain with $4{\times}4$ block-based method. First of all, observe the blocking artifacts with $4{\times}4$ block in DCT domain. Then eliminate the blocking effects using effective filtering method that is $4{\times}4$ block-based. Experimental results have clearly shown that our algorithm presents substantially higher quality in subjective and objective point of view than the other algorithms.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.57-65
• /
• 2004

In the block matching algorithm, search patterns of different shapes or sizes and the distribution of motion vectors have a large impact on both the searching speed and the image quality. In this paper, we propose a new fast block matching algorithm using the unit-diamond search pattern and the flat-hexagon search pattern. Our algorithm first finds the motion vectors that are close to the center of search window using the unit-diamond search pattern, and then fastly finds the other motion vectors that are not close to the center of search window using the flat-hexagon search pattern. Through experiments, compared with the hexagon-based search algorithm(HEXBS), the proposed unit-diamond and flat-hexagonal pattern search algorithm(UDFHS) improves as high as 11∼51% in terms of average number of search point per motion vector estimation and improves about 0.05∼0.74㏈ in terms of PSNR(Peak Signal to Noise Ratio).