• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.644-651
• /
• 2000

In cases of severe alveolar bony resorption in the edentulous posterior maxillae, implant placement is limited anatomically due to maxillary sinus. If the ridge is atrophic, the various bone grafting methods are required for the ridge augmentation. But the result of the onlay grafting procedure is not always promising. On the posterior maxilla, maxillary sinus mucosa lifting and bone grafting into the sinus floor, subantral augmentation(SA) technique are recommended. Various SA procedures have been developed for implant installation. We perfer to simultaneous block bone graft and implant installation through the residual alveolar ridge into the grafted block bone to fix the grafted bone and to gain the primary stability of the installed fixture. When a sagittal skeletal discrepancy in present due to the severe alveolar bony resorption of the maxilla, the advancement of the maxilla by Le Fort I osteotomy simultaneously with installation of implant fixtures combined with sinus lifting and interpositional bone graft procedure can be indicated. We applied various SA techniques for implant installtion to the 46 edentulous posterior maxillae, and total 154 implants were installed at our department from 1992 to 1999. Various SA techniques were classified in detail and the indications of each techniques were discussed. The changes of residual bony height following SA procedure were studied. The results were as follows. 1. The SA procedure combined with bone graft and simultaneous fixture installation were performed in 41 cases, 126 fixtures were installed and 5 fixtures were removed out of them. Le Fort I osteotomy procedure combined with sinus lifting and interpositional bone graft simultaneous with fixture installation were performed in 5 cases. Total 28 fixtures were installed and 2 fixtures were removed so far. 2. Autogenous block bone graft into sinus floor were performed in 35 cases, autogenous particulated marrow cancellous bone(PMCB) graft in 9 cases, and demineralized human bone powder in 2 cases. The donor site for bone graft were anterior iliac bone in 39 cases, posterior iliac bone in 3 cases and mandibular symphysis in 1 case and mandibular ramus in 1 case. 3. In 9 cases with which SA procedure had been performed with the block bone graft, the change of pre- and postoperative residual bony height were measured using MPR(multiplanar reformatted)-CT. The mean residual bony height was 8.0mm preoperatively, 20.2mm at 6 months following up operation and we gained average 12.2mm alveolar bony height. So, we can recommend this one-stage subantral augmentation and fixture installation technique as a time conserving, safe and useful method for compromised posterior edentulous maxilla.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.5
• /
• pp.232-239
• /
• 2015

Objectives: The purpose of this study was to estimate the volumetric change of augmented autobone harvested from mandibular body cortical bone, using cone-beam computed tomography (CBCT) and three-dimensional reconstruction. In addition, the clinical success of dental implants placed 4 to 6 months after bone grafting was also evaluated. Materials and Methods: Ninety-five patients (48 men and 47 women) aged 19 to 72 years were included in this study. A total of 128 graft sites were evaluated. The graft sites were divided into three parts: anterior and both posterior regions of one jaw. All patients included in the study were scheduled for an onlay graft and implantation using a two-stage procedure. The dental implants were inserted 4 to 6 months after the bone graft. Volumetric stability was evaluated by serial CBCT images. Results: No major complications were observed for the donor sites. A total of 128 block bones were used to augment severely resorbed alveolar bone. Only 1 of the 128 bone grafts was resorbed by more than half, and that was due to infection. In total, the average amount of residual grafted bone after resorption at the recipient sites was $74.6%{\pm}8.4%$. Conclusion: Volumetric stability of mandibular body autogenous block grafts is predictable. The procedure is satisfactory for patients who want dental implants regardless of atrophic alveolar bone.

• Archives of Plastic Surgery
• /
• v.40 no.3
• /
• pp.209-213
• /
• 2013

Background A cartilage wedge block and covering flap are standard procedures for firm elevation of the ear in microtia correction. However, using costal cartilage for elevation of the reconstructed auricle can be insufficient, and the fixed cartilage wedge block may be absorbed or may slip out. Furthermore, elevating covering flaps is time-consuming and uses up fascia, a potential source of reconstruction material. Therefore, we propose an innovative method using autologous onlay rib bone graft for auricular elevation of microtia. Methods From February 1995 to August 2012, 77 patients received a first stage operation with a rib cartilage framework graft. In the second stage operation, a small full thickness of rib bone was harvested through the previous donor scar. The bihalved rib bone was inserted into the subperiosteal pocket beneath the cartilage framework. Results The follow-up time ranged from 1 month to 17 years, with a mean of 3 years. All of the patients sustained the elevation of their ears very well during the follow-up period. Donor site problems, except for hypertrophic scars, were not observed. Surgery-related complications, specifically skin necrosis, infection, or hematoma, occurred in 4 cases. Conclusions Onlay rib bone graft used to elevate the reconstructed auricle is a more anatomically appropriate material than cartilage, due to the bone-to-bone contact between the bone graft and the temporal bone. Postoperative minor correction of the elevation degree is straightforward and the skin graft survives better. Therefore, reconstructed auricle elevation using onlay rib bone graft is a useful and valuable method.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.6
• /
• pp.570-578
• /
• 2006

A severely atrophic maxilla may disturb the proper implant placement. The various bone graft techniques are required for simultaneous or delayed implantation in the cases of atrophic alveolar ridges. We present 11 consecutive patients treated with simultaneous implantation using the autogenous inlay and/or onlay bone grafts from iliac crest to the floor of the maxillary sinus and the alveolar crest. In the cases of atrophic maxilla, a total 69 implants were simultaneously placed with autogenous iliac bone graft. 40 fixtures were inserted in the sinus floor simultaneously with subantral block bone graft, the other 29 fixtures were placed in the anterior or premolar areas with block or particulate bone graft. The vertical alveolar bone height was measured with Dental CT at the preoperation and 6 months postoperation. Moreover, the implant stability quotients (ISQ) were measured by $Osstell^{TM}$ during second implant surgery at 6 months later of first implantation. All implants were obtained successful osseointegration with the grafted bone. The mean vertical increases were 3.9mm in the anterior ridges and 12.8mm in the posterior ridges. During the second implant surgery, mean ISQ were 62.95 in the anterior ridge and 61.32 in the posterior ridge. We concluded that the simultaneous implantation with autogenous iliac bone graft were stable and available methods for severely atrophic maxilla.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.236-244
• /
• 1996

The maxillary sinus elevation for simultaneous placement of dental implants and combination grafts of autogenous bone harvested from the maxillary tuberosity and demineralized freeze dried bone and HA is relatively easy and safely done under local anesthesia in out patients clinic. This article is to introduce the sinus floor elevation method which has been performed to 5 patients in the department of Dentistry/Oral & Maxillofacial Surgery, Kangnam Sacred Heart Hospital, Hallym University, from 1993.

• Journal of Korean Dental Science
• /
• v.3 no.2
• /
• pp.50-59
• /
• 2010

Implant placement is frequently complicated and challenging because of the poor quality and inadequate height of bone. Clinicians should consider various surgical procedures to overcome the problems. We report a case with various surgical procedures used such as inferior alveolar nerve repositioning, sinus bone graft, and autogenous block bone graft using the coronoid process and ramus to overcome severe vertical and horizontal alveolar bone atrophy.

• Journal of Periodontal and Implant Science
• /
• v.43 no.5
• /
• pp.243-247
• /
• 2013

Purpose: The aim of this work is to evaluate a surgical technique for mobilization of mal posed dental implant in anterior area. Methods: A 38-year-old patient consulted our unit for esthetic dissatisfaction with the implant treatment of a central incisor. An implant was observed in 11 and 21, where 11 was 3 mm above the ideal limit, with excessive vestibular angulation. The choice was made to perform a segmental osteotomy and mobilize the bone block and the implant down and forward; a bone block extracted from the mandibular ramus was installed between the implant block and the bed to stabilize the segment. Results: After 4 months, a conventional fixed prosthesis was created and the esthetic result achieved was close to what the patient wanted, with no need for further surgery. The surgical condition was stabilized and maintained for the long-time and no complications how necrosis, infection or bone defects was present. Conclusions: It was concluded that the procedure is efficient, and the biological arguments in favor of the procedure are discussed.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.670-675
• /
• 2016

Calcium phosphate crystallites were prepared by wet chemical method for use in artificial bone. In order to obtain ${\beta}$-tricalcium phosphate (TCP), nano-crystalline calcium phosphate (CaP) was precipitated at $37^{\circ}C$ and at $pH5.0{\pm}0.1$ under stirring using highly active $Ca(OH)_2$ in DI water and an aqueous solution of $H_3PO_4$. The precipitated nano-crystalline CaP solution was kept at $90^{\circ}C$ for the growth of CaP crystallites. Through the growing process of CaP crystallites, we were able to obtain various sizes of rectangular CaP crystallites according to the crystal growing times. Dry nano-crystalline CaP powders at $37^{\circ}C$ were mixed with dry macro-crystalline CaP crystallites and the shaped mixture sample was fired at $1150^{\circ}C$ to make a ${\beta}-TCP$ block. Several tens of nm powders were uniformly coated on the surface, which was comprised of powders of several tens of ${\mu}m$, using a vibrator. The mixing ratio between the nanometer powders and the micrometer powders greatly affected the mechanical strength of the mixture block; the most appropriate ratio of these two materials was 50 wt% to 50 wt%. The sintered block showed improved mechanical strength, which was caused by the solid state interaction between the nano-crystalline ${\beta}-TCP$ and the macro-crystalline ${\beta}-TCP$.

• Journal of Periodontal and Implant Science
• /
• v.53 no.6
• /
• pp.406-416
• /
• 2023

Purpose: No evidence exists regarding the advantages of periodontal regeneration treatment for furcation defects using soft block bone substitutes. Therefore, this randomized controlled trial aimed to assess the clinical and radiographic outcomes of regenerative therapy using porcine-derived soft block bone substitutes (DPBM-C, test group) compared with porcine-derived particulate bone substitutes (DPBM, control group) for the treatment of severe class II furcation defects in the mandibular molar regions. Methods: Thirty-five enrolled patients (test group, n=17; control group, n=18) were available for a 12-month follow-up assessment. Clinical (probing pocket depth [PPD] and clinical attachment level [CAL]) and radiographic (vertical furcation defect; VFD) parameters were evaluated at baseline and 6 and 12 months after regenerative treatment. Early postoperative discomfort (severity and duration of pain and swelling) and wound healing outcomes (dehiscence, suppuration, abscess formation, and swelling) were also assessed 2 weeks after surgery. Results: For both treatment modalities, significant improvements in PPD, CAL, and VFD were found in the test group (PPD reduction of 4.1±3.0 mm, CAL gain of 4.4±2.9 mm, and VFD reduction of 4.1±2.5 mm) and control group (PPD reduction of 2.7±2.0 mm, CAL gain of 2.0±2.8 mm, and VFD reduction of 2.4±2.5 mm) 12 months after the regenerative treatment of furcation defects (P<0.05). However, no statistically significant differences were found in any of the measured clinical and radiographic parameters, and no significant differences were observed in any early postoperative discomfort and wound healing outcomes between the 2 groups. Conclusions: Similar to DPBM, DPBM-C showed favorable clinical and radiographic outcomes for periodontal regeneration of severe class II furcation defects in a 12-month follow-up period.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.1
• /
• pp.63-79
• /
• 1993

To repair bony defects with tansplanted bone in the body, fresh autogenous bone is undoubtly, the most effective bone graft for clinical applications. But the demineralized bone has the matrix-induced bone formation which was suggested by Urist in 1965. Many authors assisted that demineralized bone powder induces phenotypic conversion of mesenchymal cells into osteoblasts, with high-density bone formation. The process of inducing differentiated cells becomes osteogenic properties. The purpose of this study was to evaluate the osteoinductive capacity of allogenic freeze-dried demineralized bone block (FDD, $7{\times}7mm$) and to compare FDD with the same sue of deep-frozen allogenic bone(DF), fresh autogenous bone (A) after implantation. The histological and ultrastructural features of tissue responses were examined after 1, 2, 4, 6, 8 weeks implantation of each experimental groups in the operative site of the New Zealand white rabbits. The results were as follows : 1. Inflammatory cell infiltration generally has appeared at 1 week, but reduced at 4 weeks in each group, but most severe in DF group. 2. Osteoblastic activity has increased for 4 weeks, but decreased at 6 weeks in each group and there was no significant difference among experimental groups. 3. New bone formation has begun at 1week, least activations in A groups, and showed the revesal line of bone formation among each group at 6 to 8 weeks. 4. Bone resorption has appeared at 1 week, but disappeared at 4 weeks in both A and DF groups, but more severe in DF than A groups. 5. In ultrastructural changs, the DF group have showed the most remarkable osteoclastic activities among experimental groups. 6. Osteoid or tangled collagen fibrils near the implanted sites were replaced by more mature, lamellated bony trabeculae during bone remodeling. There was little difference among each experimental groups. 7. During the convertion osteoblasts to osteocytes which embedded within the bone matrix, there was organ-less-poor cytoplasm, increased nuclear chromatin, abundant rough endothelial reticulum (RER) in each groups. From the above the findings, the DF group shored more bone resorption and foreign body reaction than FDD and A groups, and FDD group showed more new bone formation or osteoblastic activity than DF and A groups in early stage. There was no significant difference of cellular activities among the FDD DF, and A groups according to the time.