• Title/Summary/Keyword: Block Movement

Search Result 265, Processing Time 0.025 seconds

Characteristic of Permeability with the Sand, Calcium Bentonite and Solidifier Mixtures according to Selective Reaction of TCE (트리클로로에틸렌(TCE) 선택적 반응에 따른 모래, 칼슘-벤토나이트 및 겔화제 혼합차수물의 투수 특성)

  • Yun, Seong Yeol;Choi, Jeong Woo;Oh, Minah;Lee, Jai-Young
    • Journal of the Korean Geosynthetics Society
    • /
    • v.19 no.1
    • /
    • pp.25-33
    • /
    • 2020
  • To improvement the swelling characteristics of the existing cutoff wall against the moisture, the permeability of the sand, calcium bentonite and solidifier mixture according to the contact with trichloroethylene (TCE) was evaluated. Characteristics analysis and the permeability test of the research materials were performed. The permeability was decreased as the mixing ratio of the calcium bentonite was increased and it was increased as the mixing ratio of the solidifier was increased. In conclusion, when mixing 15% of calcium bentonite and more than 30% of solidifier, the permeability coefficient in the underground water movement was analyzed as more than α × 10-4 cm/sec showing that it does not block the underground water movement. In addition, as the permeability coefficient of mixtures after TCE reaction was analyzed as less than α ×10-7 cm/sec, it satisfied the condition of blocking layer (less than 1.0 × 10-6 cm/sec). Therefore, the calcium bentonite and solidifier can be utilized as barrier that showing the characteristic of percolation ability conversion in soil and underground water contaminated with TCE.

Development of an Imaging Based Gang Protection System

  • Grimm, M.;Pelz, M.
    • International Journal of Railway
    • /
    • v.1 no.4
    • /
    • pp.149-156
    • /
    • 2008
  • During maintenance or construction works in or at the tracks of railways, high risks for passengers and railway staff, especially for the workers on the construction site exist. The high risks result out of the movement of rail vehicles, like trains or construction vehicles, which must be faced by using any available technical and operational technologies for securing them against the environment. Therefore, it is necessary to evaluate the level of protection continuously and to identify new and innovative methods and technologies for the protection of the gang (construction worker, machines and material). Especially on construction sites at line sections with two or more parallel tracks but also with single tracks, there are still a lot of incidents and accidents mostly with seriously injured persons or fatalities. These were mainly gang members that breach the railway-loading gage. By using proper warning or protection systems, the avoidance of such accidents must be achieved. The latest developments. in gang protection systems concern on the one hand fixed barriers in the middle between the construction site and the operated track and on the other hand construction vehicles equipped with automatic warning systems. The disadvantage of such protection methods is that the gang can be warned against an approaching train but a monitoring of the gang members cannot be performed. Only one part of a potential dangerous situation will be detected. If the gang members will overhear the acoustic warning signal of the security staff and the workers will not leave the danger zone in the track, the driver of the approaching train had no chance to react to the dangerous situation. An accident is often inevitable. While the detection of acoustic warning signals by the gang members working on a construction site is very difficult, the acoustical planning of an automatic warning system has to be designed for an acoustic short range level of one meter besides the construction vehicle. The decision about the use of today's technical warning system (fixed systems, automatic warning systems, etc.) must be geared to the technical feasibility and the level of safety which is needed. Criteria for decision guidance to block a track should be developed by danger estimation and economical variables. To realize the actual jurisdiction and to minimize the hazards of railway operations by the use of construction vehicles near the tracks further developments are needed. This means, that the warning systems have to be enhanced to systems for protection, which monitor the realization of the warning signal as a precondition for giving a movement authority to a train. This method can protect against accidents caused by predictable wrongdoing. The actual state of the art technique of using a collective warning combined with additional security staff is no longer acceptable. Therefore, the Institute of Transportation System of the German Aerospace Center in Braunschweig (Germany) will develop a gang warning and protection system based upon imaging methods, with optical sensors such as video in visible and invisible ranges, radar, laser, and other. The advantage of such a system based on the possibility to monitor both the gang itself and the railway-loading gauge either of the parallel track or of the same track still in use. By monitoring both situations, the system will be able to generate a warning message for the approaching train, that there are obstacles in the track, so that the train can be stopped to prevent an accident. And also the gang workers will be warned, while they breach their area.

  • PDF

Types and Characteristics of Landslides in Danyang Geopark (단양 지질공원 내의 산사태 유형과 특징)

  • Seong-Woo Moon;Ho-Geun Kim;Yong-Seok Seo
    • The Journal of Engineering Geology
    • /
    • v.33 no.3
    • /
    • pp.427-438
    • /
    • 2023
  • We carried out a geological survey to classify the types of mass movement in Danyang Geopark (where various rock types are distributed) and analyzed the mechanical and hydraulic characteristics of landslide materials using a series of laboratory tests. Debris flows occurred in areas of limestone/marble, shale, and porphyroblastic gneiss, and limestone/marble landslides were distinguished from the others through the presence of karren topography. Soil tests showed that soil derived from weathered gneiss, which has a higher proportion of coarse grains, has a higher friction angle, lower cohesion, and larger hydraulic conductivity than soils from areas of limestone/marble, and shale. Rock failure mass movements occurred in areas of phyllite, sandstone, and conglomerate and were subdivided into plane failure, block-fall, and boulder-fall types in areas of phyllite, sandstone, and conglomerate, respectively. The shear strength of phyllite is much lower than that of the other types of rock, which have similar rock quality. The slake durability index of the conglomerate is similar to that of the other rock types, which have similar degrees of weathering, but differential weathering of the matrix and clasts was clearly observed when comparing the samples before and after the test. This study can help establish appropriate reinforcement and disaster prevention measures, which depend on the type of mass movement expected given the geological characteristics of an area.

Effects of Aquatic Exercise on Upper Extremity Function and Postural Control During Reaching in Children With Cerebral Palsy

  • Yongjin Jeon;Hye-Seon Jeon;Chunghwi Yi;Ohyun Kwon;Heonseock Cynn;Duckwon Oh
    • Physical Therapy Korea
    • /
    • v.30 no.2
    • /
    • pp.128-135
    • /
    • 2023
  • Background: Despite the fact that aquatic exercise is one of the most popular alternative treatment methods for children with cerebral palsy (CP), there are few research regarding its effectiveness. Objects: The purpose of this study was to examine the effects of aquatic exercise on upper extremity function and postural control during reaching in children with CP. Methods: Ten participants (eight males and two females; 4-10 years; Gross Motor Function Classification System levels II-IV) with spastic diplegia were recruited to this study. The aquatic exercise program consisted of four modified movements that were selected from the Halliwick 10-point program to enhance upper extremity and trunk movements. The participants attended treatment two times a week for 6 weeks, averaging 35 minutes each session. The Box and Block Test (BBT), transferring pennies in the Bruininks-Oseretsky Test (BOT), and pediatric reaching test (PRT) scores were used as clinical measures. Three-dimensional motion analysis system was used to collect and analyze kinematic data. Differences in BBT and BOT values among pre-treatment, post-treatment, and retention (after 3 weeks) were analyzed using a Friedman test. In addition, the PRT scores and variables (movement time, hand velocity, straightness ratio, and number of movement units) from the three-dimensional motion analysis were tested using a Wilcoxon signed-rank test. The significance level was established at p < 0.05. When the results appeared to be statistically significant, a post-hoc test for multiple comparisons was performed with the Wilcoxon signed-rank test. Results: All clinical measures, which included BBT, transferring pennies of BOT, and PRT, were significantly increased between pre-intervention and post-intervention scores and between pre-intervention and retention scores after treatment (p = 0.001). Three-dimensional motion analysis mostly were significantly improved after treatment (p = 0.001). Conclusion: Aquatic exercise may help to improve body function, activity, and participation in children with varying types of physical disabilities.

A study on the design of an efficient hardware and software mixed-mode image processing system for detecting patient movement (환자움직임 감지를 위한 효율적인 하드웨어 및 소프트웨어 혼성 모드 영상처리시스템설계에 관한 연구)

  • Seungmin Jung;Euisung Jung;Myeonghwan Kim
    • Journal of Internet Computing and Services
    • /
    • v.25 no.1
    • /
    • pp.29-37
    • /
    • 2024
  • In this paper, we propose an efficient image processing system to detect and track the movement of specific objects such as patients. The proposed system extracts the outline area of an object from a binarized difference image by applying a thinning algorithm that enables more precise detection compared to previous algorithms and is advantageous for mixed-mode design. The binarization and thinning steps, which require a lot of computation, are designed based on RTL (Register Transfer Level) and replaced with optimized hardware blocks through logic circuit synthesis. The designed binarization and thinning block was synthesized into a logic circuit using the standard 180n CMOS library and its operation was verified through simulation. To compare software-based performance, performance analysis of binary and thinning operations was also performed by applying sample images with 640 × 360 resolution in a 32-bit FPGA embedded system environment. As a result of verification, it was confirmed that the mixed-mode design can improve the processing speed by 93.8% in the binary and thinning stages compared to the previous software-only processing speed. The proposed mixed-mode system for object recognition is expected to be able to efficiently monitor patient movements even in an edge computing environment where artificial intelligence networks are not applied.

Gas Injection Experiment to Investigate Gas Migration in Saturated Compacted Bentonite (포화 압축 벤토나이트 내 기체 이동 현상 관측을 위한 기체 주입 시험)

  • Jung-Tae Kim;Changsoo Lee;Minhyeong Lee;Jin-Seop Kim;Sinhang Kang
    • Tunnel and Underground Space
    • /
    • v.34 no.2
    • /
    • pp.89-103
    • /
    • 2024
  • In the disposal environment, gases can be generated at the interface between canister and buffer due to various factors such as anaerobic corrosion, radiolysis, and microbial degradation. If the gas generation rate exceeds the diffusion rate, the gas within the buffer may compress, resulting in physical damage to the buffer due to the increased pore pressure. In particular, the rapid movement of gases, known as gas breakthroughs, through the dilatancy pathway formed during this process may lead to releasing radionuclide. Therefore, understanding these gas generation and movement mechanism is essential for the safety assessment of the disposal systems. In this study, an experimental apparatus for investigating gas migration within buffer was constructed based on a literature review. Subsequently, a gas injection experiment was conducted on a compacted bentonite block made of Bentonile WRK (Clariant Ltd.) powder. The results clearly demonstrated a sharp increase in stress and pressure typically observed at the onset of gas breakthrough within the buffer. Additionally, the range of stresses induced by the swelling phenomenon of the buffer, was 4.7 to 9.1 MPa. The apparent gas entry pressure was determined to be approximately 7.8 MPa. The equipment established in this study is expected to be utilized for various experiments aimed at building a database on the initial properties of buffer and the conditions during gas injection, contributing to understanding the gas migration phenomena.

Characteristics of the Cenozoic crustal deformation in SE Korea and their tectonic implications (한반도 동남부 신생대 지각변형의 주요 특징과 지구조적 의의)

  • Son, Moon;Kim, Jong-Sun;Chong, Hye-Yoon;Lee, Yung-Hee;Kim, In-Soo
    • The Korean Journal of Petroleum Geology
    • /
    • v.13 no.1
    • /
    • pp.1-16
    • /
    • 2007
  • The southeastern Korean Peninsula has experienced crustal multi-deformations according to changes of global tectonic setting during the Cenozoic. Characteristic features of the crustal deformations in relation to major Cenozoic tectonic events are summarized as follows. (1) Collision of Indian and Eurasian continents and abrupt change of movement direction of the Pacific plate (50${\sim}$43 Ma): The collision of Indian and Eurasian continents caused the eastward extrusion of East Asia block as a trench-rollback, and then the movement direction of the Pacific plate was abruptly changed from NNW to WNW. As a result, the strong suction-force along the plate boundary produced a tensional stress field trending EW or WNW-ESE in southeastern Korea, which resultantly induced the passive intrusion of NS or NNE trending mafic dike swarm. (2) Opening of the East Sea (25${\sim}$16 Ma): The NS or NNW-SSE trending opening of the East Sea generated a dextral shear stress regime trending NNW-SSE along the eastern coast line of the Korean Peninsula. As a result, pull-apart basins were developed in right bending and overstepping parts along major dextral strike slip faults trending NNW-SSE in southeastern Korea. The basins can be divided into two types on the basis of geometry and kinematics: Parallelogram-shaped basin (rhombochasm) and wedged-shaped basin (sphenochasm), respectively. In those times, the basins and adjacent basement blocks experienced clockwise rotation and northwestward tilting contemporaneously, and the basins often experienced a kind of propagating rifting from NE toward SE. At about 17Ma, the Yonil Tectonic Line, which is the westernmost border fault of the Miocene crustal deformation in southeastern Korea, began to move as a major dextral strike slip fault. (3) Clockwise rotation of southeastern Japan Island (about 15 Ma): The collision of the Izu-Bonin Arc and southeastern Japan Island, as a result of northward movement of the Philippine sea-plate, induced the clockwise rotation of southeastern Japan Island. The event caused the NW-SE compression in the Korea Strait as a tectonic inversion, which resultantly tenninated the basin extension and caused local counterclockwise rotation of blocks in southeastern Korea. (4) E-W compression in the East Asia (after about 5 Ma): Decreasing subduction angle of the Pacific plate and eastward movement of the Amurian plate have constructed the-top-to-west thrusts and become a major cause for earthquakes in southeastern Korea until the present time.

  • PDF

Geological Structure and Mineralization in the Vophi Bum Cr Mineralized Zone, NW Myanmar (미얀마 북서부 보피붐 크롬광화대의 지질구조와 광화작용)

  • Ryoo, Chung-Ryul;Heo, Cheol-Ho;Aung, Zaw Linn
    • The Journal of the Petrological Society of Korea
    • /
    • v.24 no.4
    • /
    • pp.307-321
    • /
    • 2015
  • The study area, Bophi Vum, Myanmar, is composed of the harzburgite, serpentinite and dunite, those are covered by Quaternary alluvium. The chromite ore bodies are developed within dunite and harzburgite bodies, mainly within dunite bodies. To identify the extension of the chromite ore bodies, we carried out trench surveys in the 5 different sites. The chromite ore bodies have 0.3-1.5 m wide, and several meters of extension, and deformed strongly as a sigmoid and a boudin shapes with dunite and harzburgite bodies by ductile deformation. The ductile deformation have a top-to-the-west shear sense, indicating the existence of a westward thrusting. The NW-SE trending distribution of ore bodies is related to the dextral ductile shearing and/or to the block rotation as a book-shelf structure by dextral strike-slip movement.

PERFORMANCE OF THE GOAT FED GRASS, SHRUB AND TREE FODDERS DURING THE DRY SEASON IN BALI, INDONESIA

  • Sukanten, I.W.;Nitis, I.M.;Uchida, S.;Putra, S.;Lana, K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.9 no.4
    • /
    • pp.381-387
    • /
    • 1996
  • An experiment was carried out for 12 weeks to study the feeding behaviour, growth and carcass characteristics of cross-bred goats. Nine bucks with an average live weight of $18.02{\pm}0.9kg$ were allocated in a completely randomized block design arrangement, consisting of three feeding regimes and three blocks. The feeding regimes consisted of 100% natural grass (Treatment A), 100% gliricidia leaf (Treatment B) and 100% ficus leaf (Treatment C). Frequency of turning-over and sniffing the feed and duration and frequency of ruminating, defaecating, and urination of goats in treatment B were longer, while duration of masticating and jaw movement of chewing one bolus was shorter than those of goats in treatments C and A (p < 0.05). Furthermore, goats in treatment B gained more live weight, consumed more feed, consumed less water and was more efficient in utilizing the feed than goats in treatments C or A (p < 0.05). The dressing percentage, carcass length and carcass fat of goats in treatment B were higher and their bone percentages were lower than those in treatments C and A (p < 0.05). There is an indication that feeding gliricidia and ficus leaves during the dry season could not only increase the body weight and improve carcass quality of the goat but also save water for household needs.

A Study on Circulation planning of the disabled in Local Cultural arts center (지역문화시설의 지체장애인 동선계획에 관한 연구 - 광주지역 문화시설을 중심으로 -)

  • Lee, Su-Yong;Park, Dong-Jun;Oh, Se-Gyu
    • Journal of The Korea Institute of Healthcare Architecture
    • /
    • v.11 no.2
    • /
    • pp.73-81
    • /
    • 2005
  • The disabled has remarkable difficulties to participate social activities and those, that block them up from access to public facilities and the comfortable habitation so they should get help from others, are mainly made by architectural facts. Buildings without impediment which consider the disabled would be the things responding to the needs of the times. If the disabled would be convenient to use facilities, there should be no difficulties to normal people. A first began to examine into the role of the architecture. And to establish radical standards for the disabled to use cultural and assembly facilities through scrutinizing facilities to get access for the disabled and movement circulations in the cultural facilities should be the conclusion. This study which is a kind of fundamental study to construct cultural facilities without obstacles for the disabled began from consideration for the problem flow line of the disabled in cultural facilities and analyzed flow lines for them to use, access, and evacuate from those which are main facilities in the region. Though, evacuation rules in cultural and assembly facilities are recommendatory in existing laws for convenience of the disabled, the congestion of the crowd coming out after performances impedes safe flows of both the disabled and crowds. Further, in case of evacuation, there would be more serious problems. Therefore, consideration of reinforcement for existing laws for convenience of the disabled is needed.

  • PDF