• Title/Summary/Keyword: Block Ack

Search Result 15, Processing Time 0.016 seconds

Design and Implementation of MAC Engine for Next-Generation WLAN (차세대 무선랜 구현을 위한 MAC 엔진 설계 및 구현)

  • Lee, Yeong-Gon;Jeong, Yong-Jin
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.6
    • /
    • pp.39-47
    • /
    • 2009
  • This paper presents implementation of two types of the 802.11 MAC engine for the next generation WLAN, 802.11n. The first version of MAC engine consists of hardwired logic and embedded firmware. Hardwired logic includes Tx block, Rx block, Backoff block, and ChannelManage block. Embedded firmware contains Protocol Control block, MLME block, and MSDU processing block. The first version has a time-critical fault during the atomic transmission caused by software overhead, so it can not be applied to 802.11n MAC. For that reason, the second version has additional blocks with hardwired logic modules to reduce software overhead of the first version. This enhanced version has 73Mbps throughput and it is expected to be further improved up to 129 Mbps with frame aggregation which is one of the key additional features of 802.11n. As a result, the second version of MAC engine can be applied to 802.11n MAC.

1-2-1 Coded Cooperative Communication Using STBC and ARQ (STBC와 ARQ를 이용한 1-2-1 부호화 협력 통신)

  • Hong, Seong-Wook;Kong, Hyung-Yun
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.5
    • /
    • pp.421-427
    • /
    • 2009
  • This paper has proposed 1-2-1 coded cooperative communication that is a combination of STBC and ARQ. Coded cooperative communication is a protocol that integrates channel coding with cooperative communication. In this paper consider convolution encoder. ARQ method can increase the spectral efficiency than conventional cooperative communication because if the received signal from source node is satisfied by the destination preferentially, the destination transmits ACK message to both relay node and source node and then recovers the received signal. Where each relay 1, 2 forwards a punctured portion of receive data. When relay transmit to destination apply STBC the reliability to increase. Moreover this protocol can get better BER performance of receiver using simple comparator. We verified BER performance for the proposed protocol through Monte-Carlo simulation over Rayleigh fading plus AWGN.

An Efficient Design of CCMP for Robust Security Network (효율적인 CCMP 코어 설계)

  • Sung Yun-Jong;Kwon Sung-Gu;Bae Du-Hyun;Park Se-Hyun;Song Oh-Young
    • Proceedings of the Korea Institutes of Information Security and Cryptology Conference
    • /
    • 2006.06a
    • /
    • pp.390-393
    • /
    • 2006
  • IEEE 802.11e 과 IEEE 802.11n에서 data의 높은 전송률을 구현하기 위해 Block Ack와 frame agegation 과 같은 새로운 mechanism이 논의 되고 있다. 이러한 mechanism은 각각의 MPDU processing 마다 짧은 응답시간을 요구한다. 본 논문에서는 위의 새로운 MAC을 지원하는 IEEE 802.11i를 위한 효율적인 CCMP 설계를 제안한다. 제안된 설계에서는 한 AES-CCM core에서 MIC calculation 과 정보 암호화가 128bit씩 순차적으로 수행되어지는 mode toggling 접근을 채택했다. 본 설계에서는 응답시간이 44 clock cycle의 짧은 짧은 시간으로 줄었다. 또한 하나의 AES-CCM core를 사용하고 낮은 주파수에서 수용할만한 data throughput과 응답시간을 얻었기 때문에 하드웨어적인 복잡성과 전력 소모를 줄일수 있었다.

  • PDF

Design and Implementation of a Latency Efficient Encoder for LTE Systems

  • Hwang, Soo-Yun;Kim, Dae-Ho;Jhang, Kyoung-Son
    • ETRI Journal
    • /
    • v.32 no.4
    • /
    • pp.493-502
    • /
    • 2010
  • The operation time of an encoder is one of the critical implementation issues for satisfying the timing requirements of Long Term Evolution (LTE) systems because the encoder is based on binary operations. In this paper, we propose a design and implementation of a latency efficient encoder for LTE systems. By virtue of 8-bit parallel processing of the cyclic redundancy checking attachment, code block (CB) segmentation, and a parallel processor, we are able to construct engines for turbo codings and rate matchings of each CB in a parallel fashion. Experimental results illustrate that although the total area and clock period of the proposed scheme are 19% and 6% larger than those of a conventional method based on a serial scheme, respectively, our parallel structure decreases the latency by about 32% to 65% compared with a serial structure. In particular, our approach is more latency efficient when the encoder processes a number of CBs. In addition, we apply the proposed scheme to a real system based on LTE, so that the timing requirement for ACK/NACK transmission is met by employing the encoder based on the parallel structure.

A Scalable Video Coding (SVC)-Aware Retransmission Scheme for Multimedia Streaming in IEEE 802.11 WLANs (IEEE 802.11 무선랜에서의 멀티미디어 전송을 위한 스케일러블 비디오 코딩 인지형 재전송 기법)

  • Kim, Namyeong;Song, Taewon;Kim, Wonjung;Pack, Sangheon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39B no.2
    • /
    • pp.95-101
    • /
    • 2014
  • Scalable video coding (SVC) encodes multimedia data into a base layer and enhancement layers to cope with variable network conditions in an adaptive manner. In SVC, enhancement layers can be decoded only when the base layer is successively received. However, existing works on SVC transmissions in IEEE 802.11 WLANs do not fully investigate this characteristic and thus their performance can be degraded. In this paper, we propose a SVC-aware retransmission (SAR) scheme in IEEE 802.11 WLANs. The SAR scheme applies different retransmission policies for base and enhancement layers by obtaining the optimal number of frames to be retransmitted. As a result, the SAR scheme can reduce unnecessary retransmissions and minimize the transmission latency. Simulation results demonstrate that the SAR scheme can reduce unnecessary data transmission by 12.6% and the transmission latency by 6.6~19.1% compared to conventional retransmission schemes.