• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.201-204
• /
• 2002

This study is performed to develop of planting block using rice straw ash for Protection of Inclined plane. For the planting, porous concrete block is demanded ability to passing water and air through void of block. In this paper, material used for porous concrete block is cement, rice straw ash, and coarse aggregate(5-10, 10-20, 5-20mm). Planting block size is 23*23*4cm and kinds of planting are Tall fescue, Lespedeza cyrtobotrya and Lespedeza cuneata. The results measured for three months show that possible planting of various kinds for porous concrete block.

• Journal of Biomedical Engineering Research
• /
• v.12 no.1
• /
• pp.57-62
• /
• 1991

ABA type block copolymers composed of poly($\gamma-benzyl$ L-glutamate) (PBLG) as the A component and poly (ethylene glycol) as the B component were obtained by polymerization of $\gamma-benzyl$ L-gletamate N -carboxyanhydride, initiated by amino groups at both ends of poly(ethylene glycol) . From circular dichroism measurements in ethylene dichloride solution as well as from infrared spectTa measurements in solid state, it was found that the polypep- tide block exists in the a-helical conformation, as in PBLG homopolymer. $Poly-N^5$ (3-hydroxypropyl glutamine) (PHPG)/poly(ethylene glycol)block copolymer hydrogel was obtained by the treatment of PBLG/PBG block copolymer with the mixture of 3-ammine-1-propanol and diamlnooctane. The water content of PHPG/PEG block copolymer hydrogel was about 80wt% when the concentration of crosslinking agent was below 5 mole % per polymer.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.167-169
• /
• 2005

The occurrence of a single bit error in transmission bitstream leads to serious temporal and spatial errors. Because moving picture coding as MPEG-2 based on block coding algorithm uses variable length coding and motion compensation coding algorithm. In this paper, we propose algorithm to conceal occurred error of I-frames in transmission channel using data of the neighboring blocks in decoder. We divide a damaged macroblock of I-frame into four sub blocks and compose new macroblock using the neighboring blocks for each sub block. We estimate the block with minimum difference value through block matching with previous frame for new macroblocks and replace each estimated block with damaged sub block in the same position. Through simulation results, the proposed algorithm will be applied to a characteristic of moving with effect and shows better performance than conventional error concealment algorithms from visual and PSNR of view.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.102-107
• /
• 2002

Compression coding based on block coding has been applied in image and video compression standard. But there is no block effect measurement due to block based image coding. In this paper, we propose a objective block effects measurement to reconstructed image using subblock DCT coding. Experimental results show that the block effects measures given by the suggested method agree well with the subjective ranking. This new objective measurement is simple and effective in measuring the block effect in the reconstructed image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2438-2446
• /
• 1999

Most of block based stereo pair compression schemes utilize the constant block size and searching area size for all the stereo pairs to find the best matching block. However, it is not efficient to use the same block size and size of searching area to all the stereo pairs, since each stereo pair has different disparity. In this Paper, we propose a method to calculate the total disparity of stereo pairs, and show how to determine the size of the block and searching area which are applied for the block based compression of the stereo pairs.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.84-89
• /
• 2009

This paper describes the development tool for applications of automotive electronic control unit based on OSEK/VDX. This development tool has a plug-in structure and is written in Java language, because of being based on Eclipse CDT. And also this development tool has another functionality of expansion, which means a special function block can be easily adopted in this development tool. Currently, this development tool consists of five blocks, which are integrated development environment block, fusing program block, system generation block, debugger block, and cross-compiler toolchain block. They have relationship between each other and work for developing OSEK/VDX-based applications. In this paper, we show the functionality of each block of this development tool and its implementation.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.1097-1100
• /
• 1999

Due to the significant computation of full search in motion estimation, extensive research in fast motion estimation algorithms has been carried out. However, most of the algorithms have the degradation in predicted images compared with the full search algorithm. To reduce an amount of significant computation while keeping the same prediction quality of the full search, we propose a fast block-matching algorithm based on gradient magnitude of reference block without any degradation of predicted image. By using Taylor series expansion, we show that the block matching errors between reference block and candidate block are proportional to the gradient magnitude of matching block. With the derived result, we propose fast full search algorithm with adaptively determined scan direction in the block matching. Experimentally, our proposed algorithm is very efficient in terms of computational speedup and has the smallest computation among all the conventional full search algorithms. Therefore, our algorithm is useful in VLSI implementation of video encoder requiring real-time application.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.65-69
• /
• 2008

Recently, zirconia is widely used in the field of dental ceramics thanks to the proliferation of CAD/CAM systems. Accordingly, different types of zirconia block are being solid in the market. However, there are no precise, objective standards for properties of zirconia. This study concerns the flexural strength of zirconia ceramic for CAD/CAM block. The test specimens used for this study were ZirBlank(Acucera), ZirBlank shade(Acucera), VITA, Cercon(Densply) and Cerasys. The test results suggest that ZirBlank shade block shows the highest flexural strength and density among the zirconia blocks tested. Its flexural strength was $971{\pm}58MPa$ and its density was 99.89%. On the other hand, Cerasys block shows the lowest flexural strength of $576{\pm}36MPa$ and the lowest density of 94.85%. Given all, the density of the specimens is found to be directly proportional to strength and inversely to grain size.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.667-674
• /
• 1987

In this paper an effective block matching algorithm is proposed to find the motion vector. There are two approaches to the estimation of the motion vector in MCC (motion compensated coding), i.e., pel(pixel element) recursive algorithm and block matching algorithm. The search algorithm in this paper is based on the block matching method. The advantage of a proposed algorithm using integral projections is the reduction of the computation time. While the conventional block matching methods have to be computed in 2-dimensional arrays, the proposed algorithm using integral projections can be computed in 1-dimensional arrays. In comparison with conventional block matching methods, a computer simulation shows that though the prediction error increases 0.23 db, it is not detectable for human eyes and the average reduction ratio of computation time obtained from the proposed algorithm is about 3-4.

• The Korean Journal of Pain
• /
• v.9 no.1
• /
• pp.114-119
• /
• 1996

Buerger's disease is a nonatherosclerogic occlusive inflammatory disease of medium and small arteries, and veins, of unknown cause. It occurs predominantly in young males who are habitual tabacco users. These patients often complain of painful ulcerations of their digits. The care of this disease is very difficult when the treatment is delayed. Consequently, early treatments are most important to patients with Buerger's disease. This disease can be treated with sympathetic block such as stellate ganglion block for upper extremities and lumbar epidural block, and lumbar sympathetic block for lower extremities. Intravascular regional sympathetic block can be another method of treatment. However, discontinuation of smoking is the most basic and essential treatment for Buerger's disease. We treated 43 Buerger's disease patients with stellate ganglion block and laser therapy. The treatment was not effective for three patients who definitely required amputation.