• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.116-135
• /
• 2004

This study was conducted to investigate effects of spent composts of Se-enriched mushrooms as the dietary Se source on muscular Se deposition and plasma glutathione peroxidase (GSH-Px) activity in the finishing Hanwoo steer. Twenty Hanwoo steers were used in the experiment and they were divided into four groups in a randomized complete block design with five replicates. Treatments were four levels (0.1, 0.3, 0.6 and 0.9ppm as fed basis) of dietary Se from the combination with spent composts of Se-enriched mushrooms and/or Se non-enriched mushrooms, in which each treatment was formulated with corn and corn gluten meal and so forth. Treatment diets were fed to Hanwoo steers for 90 days until the slaughter. Dry matter intakes had no significant differences among treatments and there were no significant differences for performances such as total BW gain and ADG among treatments. The Se concentration in blood was linearly increased with increasing dietary selenium levels and reached a plateau level after 8 weeks (p<0.001). Plasma GSH-Px activities had the similar trends to blood Se concentrations by showing that the increased dietary Se level significantly increased plasma GSH-Px activities of both total and Se-dependent (p<0.001). Muscle Se contents of Se-supplemented groups were linearly increased by 1.35 ~ 1.68 folds compared with the control group (0.1ppm; 0.273㎍/dry g) and especially those of the hind legs for 0.9ppm treatment showed the highest Se content as shown 0.457㎍ per dry gram (p<0.01) corresponding to approximately 70% increase of the control group. Se retention rate in the muscle of dietary Se originated from spent composts of Se-enriched mushrooms was estimated of maximum approximately 30% and dietary Se content showed the significant correlation with plasma GSH-Px activities and muscle Se contents (p<0.01). Accordingly, Se present in spent composts of Se-enriched mushroom as the dietary Se source not only had great bioavailabilities showing higher blood Se concentration and plasma GSH-Px activities, but also increased Se deposition in the muscle for Hanwoo beef cattle.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.186-200
• /
• 2023

This study aims to improve the usability of the white cane, which is walking equipment that most local visually impaired people use and carry when going out, and to contribute to the prevention of safety accidents and the walking rights of visually impaired people by providing improvement and resolution measures for the problems identified. Also, this study is a study on the visually impaired, primarily targeting the 1st to 2nd degree visually impaired people, who cannot go out on their own without walking equipment such as a white cane, corresponding to 20% among approximately 250,000 blind and low vision people in the Korean population. In the study process, the concept has been developed from the user's point of view in order that the white cane becomes a real help in the walking step of the visually impaired and the improvement of usability of the white cane, the main walking equipment for the visually impaired, are done by problem identification through the Double Diamond Model of Design Thinking (Empathize → Define → Ideate → Prototype → Test (verify)). As a result of the investigation in the process of Empathy, a total of five issues was synthesized, including an increase in the proportion of the visually impaired people, an insufficient workforce situation to help all the visually impaired, an improvement and advancement of assistive devices essential for the visually impaired, problems of damage, illegal occupation, demolition, maintenance about braille blocks, making braille block paradigms for the visually impaired and for everyone. In Ideate and Prototype steps, situations derived from brainstorming were grouped and the relationship were made through the KJ method, and specific situations and major causes were organized to establish the direction of the concept. The derived solutions and major functions are defined in four categories, and representative situations requiring solutions and major functions are organized into two user scenarios. Ideas were visualized by arranging the virtual Persona and Customer Journey Map according to the situation and producing a prototype through 3D modeling. Finally, in the evaluation, the final concept derived is a device such a smart cane for guidance for the visually impaired as ① a smart cane emphasizing portability + ② compatibility with other electronic devices + ③ a product with safety and convenience.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.26-31
• /
• 2022

This study was carried out to evaluate the growth characteristics and forage yield potential for warm season grass as emergency forages. The experimental design was a randomized block design (RBD) with three replications. Two barnyard millet (Echinochloa species cv. Shirohie and Jeju native), a pearl millet (Pennisetum glaucum cv Feed milk 2) a proso millet (Panicum miliaceum cv Native), a teffgrass (Eragrostis tef cv. Tiffany) and a kleingrass (Panicum coloratum cv. Selection 75) were compared for forage production and quality at the Mid regions of Korea. Warm season forage crops were sown on May 21 and June 23 respectively, and in 2021, it was sown twice on May 21 and June 21 The number of days to seedling emergence for barnyard millet and teffgrass was observed approximately 10 and 3 days after seeding, respectively. The cultivation period from seeding to harvest was within 60 days for all entry spices except for the late-heading type barnyard millet (within 84 days). As for the dry matter yield by seeding date, the dry matter yield of the late-heading type barnyard millet in May seeding was the highest at 23,872 kg/ha, and the kleingrass was the lowest at 3,888 kg/ha. For the June seeding, the dry matter yield of the late-heading type barnyard millet was 17,032 kg/ha, the highest, and the proso millet, teffgrass and kleingrass showed the lowest at 5,468, 5,442, and 5,197 kg/ha, respectively. The crude protein (CP) content was varied by warm season grass species, but the early-heading type barnyard millet, teffgrass, and kleingrass showed the highest tendency, and the late-heading type barnyard millet showed the lowest at 5.7~5.9%. Neutral detergent fiber (NDF) and acid detergent fiber (ADF) content did not show a significant difference between the seeding in May, but kleingrass in June sowed lower than the others.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.41-46
• /
• 2022

To investigate the domestic seed production potential of Italian ryegrass, it was sown in autumn in the southern region and harvested in the spring of the following year to investigate the productivity and quality of seeds and straw. Italian ryegrass (Lolium multiflorum Lam.) 'GreenCall' variety was sown in Jinju, Gyeongnam in the fall of 2020 with three seeding rates (20, 30 and 40 kg/ha). The experiment was arranged consisted of a randomized block design with three replications. The ryegrass was sown on October 17, 2020, and the harvest was on May 31, about 60 days from the heading stage. The heading stage of Italian ryegrass was April 28, and there was no difference among treatments. Plant height was significantly shorter in the 40 kg/ha seeding treatment group, and there was no significant difference in the remaining treatments. The resistance of lodging, disease, and cold did not show significant differences among treatments. Spike length and number of seeds per spike were highest at 20 kg/ha seeding amount, and there was no difference in the remaining treatments. The seed yield was the highest at 1,956 kg/ha in the 20 kg/ha seeding rate, and there was no difference in the 30 and 40 kg/ha seeding rates. The dry matter content of seeds and straws was 45.60 and 41.83% on average, and there was no significant difference among treatments. The amount of remaining straw after seed harvesting was found to be 7,689 kg/ha on average on a dry basis, and it was high in the 40 kg/ha sowing area, but there was no significant difference among treatments. According to the above results, it was found that it is most advantageous to sow at 20 kg/ha when producing Italian ryegrass seeds through autumn sowing in the southern region.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.441-447
• /
• 2023

Lead(Pb), which is currently mainly used for shielding purposes in the medical radiation, has excellent radiation shielding functions, but is continuously exposed to radiation directly or indirectly due to the harmfulness of lead itself to the human body and the inconvenience caused by its heavy weight. Research on shielding materials that are human-friendly, lightweight, and convenient to use that can block risks and replace lead is continuously being conducted. In this study, based on the commonly used polyethylene terephthalate (PET) film and the fabric material used in actual radiation protective clothing, a multi-layer thin film was realized through sputtering and vacuum deposition of bismuth, tungsten, and tin, which are metal materials that can shield radiation. Thus, a shielding film was produced and its applicability as a radiation shielding material was evaluated. The radiation shielding film was manufactured by establishing the optimized conditions for each shielding material while controlling the applied voltage, roll driving speed, and gas supply amount to manufacture the shielding film. The adhesion between the parent material and the shielding metal thin film was confirmed by Cross-cut 100/100, and the stability of the thin film was confirmed through a hot water test for 1 hour to measure the change of the thin film over time. The shielding performance of the finally realized shielding film was measured by the Korea association for radiation application (KARA), and the test conditions (inverse wide beam, tube voltage 50 kV, half layer 1.828 mmAl) were set to obtain an attenuation ratio of 16.4 (initial value 0.300 mGy/s, measured value 0.018 mGy/s) and damping ratio 4.31 (initial value 0.300 mGy/s, measured value 0.069 mGy/s) were obtained. by securing process efficiency for future commercialization, light and shielding films and fabrics were used to lay the foundation for the application of films to radiation protective clothing or construction materials with shielding functions.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.225-231
• /
• 2023

This study was carried out to investigate the growth characteristics, yield and chemical compositions of whole crop barley (Hordeum vulgare L.) according to mixing ratio of chemical fertilizer (CF) and liquid swine manure (LSM) in the paddy field cultivation. The experimental design was arranged in a randomized block design with five treatments and three replications. The manure fertilizer ratio of five treatments were CF 100% (T1), CF 70% + LSM 30% (T2), CF 50% + LSM 50% (T3), CF 30% + LSM 70% (T4), and LSM 100% (T5) of whole crop barley. At this time, the application of liquid swine manure was based solely on the nitrogen. Plant length was higher at T1 as compared to other treatments (T2, T3, T4 and T5). Fresh yield, dry matter yield and total digestive nutrients (TDN) yield were the highest in T1, whereas the lowest in T5 treatment (p<0.05). Chemical compositions (crude protein, crude fat, neutral detergent fiber, acid detergent fiber and TDN) did not show significant difference among treatments. Ca and Na contents were significantly lower at T1 as compared to other treatments (T2, T3, T4 and T5). However, Mg and P contents were significantly higher at T1 as compared to other treatments(p<0.05). There was no significant difference in total free sugar content among T2, T3, T4 and T5 treatments, but the chemical fertilizer (T1) was significantly lower than the other treatments (p<0.01). Considering the above results, liquid swine manure application showed lower dry matter yield and TDN yield than chemical fertilizer, but higher free sugar content. Therefore, in order to increase the productivity of whole crop barley, it is considered desirable to mix liquid fertilizer with chemical fertilizer, taking into account the decomposition rate and insufficient components (P, K) of the liquid swine manure.

• Korean Journal of Poultry Science
• /
• v.50 no.3
• /
• pp.171-185
• /
• 2023

This study was conducted to investigate the effects of supplementation of Allium hookeri (AH) root powder on the gut microbiome, immunity, and health in broiler chickens fed experimental diets from d 10 to 28. A total of 60 10-day-old Ross 308 broilers were weighed and assigned to two dietary treatments with 5 birds per cage in a randomized complete block design based on body weight. The two experimental diets consisted of a control diet based on corn-soybean meal and the control diet supplemented with 0.3% AH root powder. All birds were fed ad libitum with experimental diets and water for 18 d. At 28 d, two birds near the median weight from each cage were selected for cecal content and small intestinal tissue sample collection. The addition of AH changed the gut microbiome by increasing probiotic candidate beneficial bacteria such as Enterococcaceae, Lactobacillaceae, Limosilactobacillus, Cuneatibacter, and Ruminoccoides. Regarding gut immunity, the supplementation of AH resulted in changes in intestinal immune cells, including reduced CD3+CD4+ T cells, which are a type of helper T cell, in the small intestine of birds (P=0.049). Additionally, there was a tendency to increase the expression of antioxidant function-related gene such as GPX2 (P=0.060), but no significant changes were observed in cytokines such as IL1b, IL6, and IL10. Overall, the addition of AH root powder may have positive effects on the microbiome of the chickens. This may help promote gut health in broiler chickens at the age of d 10 to 28.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.697-714
• /
• 2023

The Tracksite of Cretaceous Dinosaurs and Pterosaurs in Jeongchon, Jinju was discovered in late 2017 during the construction of the Ppuri industry complex. This site is a natural heritage site with a high paleontological value, as it preserves fossils of various types of dinosaurs, pterosaurs, and animal traces at a dense concentration. In this study, we surveyed that physical weathering such as joint, crack, scaling, exfoliation, and fragmentation occurred through field research in the fossil site, and conducted basic research on conservation science to reduce the damage. To this end, among the eight levels identified after excavation, the rocks of Level 3, which yielded a large number of theropod footprint fossils, and Level 4, which yielded pterosaur footprint fossils, were analyzed for material characteristics and evaluation of the effectiveness of consolidation and adhesion. This results showed that the rocks in the Level 3 stratum were dark gray siltstone and the rocks in the Level 4 stratum were dark gray shale, which contained a large amount of calcite and were composed of quartz, plagioclase, mica, alkali feldspar, and other clay minerals, which are likely to be damaged by rainfall under external conditions. As a result of conducting an artificial weathering experiment by dividing the probationary sample into four groups: untreated, consolidation treatment, anti-swelling treatment, and adhesive treatment, the consolidation and the swelling inhibitor showed an effect immediately after treatment, but did not show a blocking effect under a freezing-thawing environment. The adhesive showed that the adhesive effect was maintained even under freezing-thawing conditions. In order to preserve the fossil sites at Jeongchon in the future, in addition to temporary measures to block the inflow of moisture, practical measures such as the construction of protective facilities should be prepared.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.168-177
• /
• 2008

Trafficablility of a miner and potential environmental impacts due to mining activities should be considered in the selection of a commercial manganese nodule mining site. These two factors can be evaluated comparatively with physical properties and shear strength of sea-bed sediments. For the qualitative comparison of potential minig sites in terms of these two factors, physical properties such as water contents, void ratios, porosities, and grain densities, and shear strengths of surface sediments were determined for the three potential manganese nodule mining sites(KR1, KR2, and KR5) in the Korean manganese nodule contract area, northeast Pacific. For the study, sediment samples were collected from 107 stations from 2004 to 2006. The physical properties of surface sediments showed more significant differences between northern(KR1, KR2) and southern(KR5) blocks than between northern blocks(KR1 vs. KR2). Water content, void ratio, and porosity of sediments from KR5 were relatively higher than those from KR1 and KR2. Grain density of sediments from KR5 was relatively lower than those from KR1 and KR2. Shear strengths of the top 10cm sediments were higher in KR1 and KR2, whereas those of the deeper part were highest in KR5 block. Generally, sediments of high water contents are less suspendible than those of the low water contents by benthic disturbances, thus less disturbance is expected in the sediments of high water content by mining activities. In terms of trafficability, the shear strength of sediment below 10 cm deep is more important than shallower part because miner will disturb at least top 10 cm interval of the surface sediments. Base on these results, we conclude that KR5 area will be the best site for commercial mining among three investigated sites in this study.