• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.2
• /
• pp.71-77
• /
• 1986

The field experiment was conducted to evaluate the effect of herbicide treatment (Banvel: 100, 200, U-46: 150, 300, Hedonal: 150, 300, Simazin: 100, 200g/10 a) on change in the botanical composition and dry matter productivity of ladino clover (Trifolium repens L.) dominated pasture mixtures. The experiment was laid down as a randomized block design with 4 replications at experimental field of Livestock Experiment Station in Suweon from 1983 to 1985. The results obtained are summarized as follows: 1. Against ladino clover in mixie grass-clover swards Banvel, U-46 and Hedonal gave good control. The percentage of ladino clover under herbicide tratment decreased to about 1-2%(Banvel), 11-18%(U-46) and 22-31%(Hedonal), respectively, while it increased to 71% in untreated pastures. However, in the second year this trend stated to reverse and occurred clover dominance again in U-46 and Hedonal application, while those remained approximately constant until end of the years under Banvel treatment. Simazin is to be not recommended. 2. The best time for herbicide treatment was found to be late summer before autumn sown 20-25 days. When it applied in early summer weed infestigation by Digitaria spp., Echinochloa spp. and other species was a severe problem. 3. Emergence and early development of introduced pastures were less satisfactory, if it oversown immediatley after herbicide treatments due to its phytotoxical damage. Residual chemicals remained about 7-10 days in topsoils. Perennial ryegrass and orchardgrass were slightly less tolerant than the other species. 4. In dry matter, taken as average of three year results, Banvel applied pastures produced the remarkably high yield of 1023 kg/10 a, which is as much as 44% higher than that of untreated plot. Dry matter yields under U-46 and Hedonal treatment were 842 and 811 kg/10 a, respectively. 5. Weender components and net energy concentration were affected by change in the botanical composition. Crude protein and NEL value were slightly higher in clover dominance than those in herbicide treatments. Total yields of net energy lactation, however, were the highest in Banvel application with 5401 MJ and the lowest in untreatment with 3889 MJ-NEL/10 a DM.

• Applied Biological Chemistry
• /
• v.10
• /
• pp.107-112
• /
• 1968

In order to study the effect of potash on the growth and yields of Soybean at different level of soil fertility and application of fertilizer (nitrogen, phosphate and calcium), $2^3$factorical experiment was carried out by pat culture with variety 'Chang-dan-baec-muc' which is most spreaded variety in Korea. The experiment consisted of five replications in a randomized block experiment with three factors (soil, fertilization and potash). Treatment were at two levels; infertile and fertile soil, none and some of fertilization and potash. Thus, the experiment comprised eight treatment combinations which consisted of all combinations. The results of this experiment are as follows: 1. No effect of each of three factors on flowering date was found. 2. Leaf-yellowing and maturing date was quickened on the fertile soil but no effect of fertilization and potash was found. 3. More premature leaf-yellowing was found on the fertile soil. 4. Deeper leaf colour cuss showed on the fertile soil and in the case of fertilization but no effect of potash was found. 5. Increasing tendency of following character: length and width of leaf, height and dia of stem, number of branches and pods; was most remarkable on the fertile soil. Application of fertilizer showed also remarkable tendency of increasing, while increasing tendency of potash was the least. 6. Same tendency was found with following charactors; weight of total plant. stem and shell, and commercial grains, weight of 100 grain and number of commercial grains. 7. As the results of analysis of variance for weight of commercial grain it, was found the teach of the three factors increased soybean yields significantly (weight of commercial grain) but the effect of potash was less than the other two factors. No significant interaction was found among three factors. 8. Greater effect of potash on increasing soybean yields was found on the fertile soil, and in the case of fertilization.

• Progress in Medical Physics
• /
• v.5 no.1
• /
• pp.87-99
• /
• 1994

Purpose : The determination of electron beam output factor was investigated from individual applicator for various energy of ML-15MDX linear accelerator. The output factor of electron beam was extended from square to rectangular field in individual applicator size through with a least-square fit to a polynomial expression. Materials : In this experiments. the measurement of output was obtained from 2${\times}$cm$^2$ to 20${\times}$20cm$^2$ of field size in different applicator size for 4 to 15 MaV electron beam energy. The output factor was defined as the ratio of maximum dose output on the central axis of the field of individual applicator size to that of a given field size. Applicator factors were derived from comparing with the output dose of reference field size 10${\times}$10cm$^2$. The thickness of block was specially designed as 10mm in thickness of Lipowitz metal for field shaping in all electron energy. Two types of output curves are included as output factors versus side of square fields and that of variable side length for X and Y in one-dimensional to compare the expected values to that of experiments. Results : Expected output factors of rectangular which was derived from that of square fields in individual applicator size from 2${\times}$2cm$^2$ to 20${\times}$20cm$^2$ in different electron energy was very closed to that of experimental measurements within 2% uncertainty. However 1D method showed a 3% discrepancy in small rectangular field for low energy electron beam. Conclusion : Emperical non-linear polynomial regressions of square root and 1D method were performed to determin the output factor in various field size and electron energy. The expected output of electron beam of square root method for square field and 1D method for rectangular field were very closed to that of measurement in all selected electron beam energy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.29-35
• /
• 2012

Purpose: The purpose of this study was to analyze temperature change along the implant-bone interface induced by grinding the occlusal surface of implant gold prosthesis and to compare the temperature generated by grinding of prosthesis with different cooling methods. Materials and methods: The experimental gold prostheses were fabricated with dental gold alloy and castable abutment. The prostheses had 3 cylindrical protrusions on the occlusal surface with 1mm in height. Temperature was measured using 16 thermocouple wires attached to the implant fixture surface and the fixture was embedded in an acrylic resin block inside the $37^{\circ}C$ water bath. Cylinders were grinded for a period of 30 second with a low-speed handpiece with green stone point. One cylindrical protrusion was grinded without cooling, the second one was grinded with air blow, and the third one was grinded with water-spray. Results: The mean maximum temperature was measured more than $47^{\circ}C$ of the implant and the maximum temperature was measured at the cervical portion of the implant in the group without cooling. There was statistically significant difference between the group without cooling and the groups with cooling (P<.05). However, there was no significant difference at all portion of implant in the groups with cooling (P>.05). Conclusion: The results of this study support that the grinding of implant gold prosthesis without cooling may damage the peri-implant tissue. The continuous use of air blow and water-spray adjacent to prosthesis during the grinding of implant gold prosthesis may prove to be beneficial for cooling of the implant.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.6
• /
• pp.836-842
• /
• 2009

The objectives of this study were to evaluate potential benefits of intercropping of corn with runner bean for a smallsized farming system, based on land equivalent ratio (LER) and silage yield and quality of corn intercropped with runner bean (Phaseolus vulgaris L.), in arid conditions of Turkey under an irrigation system. This experiment was established as a split-plot design in a randomized complete block, with three replications and carried out over two (consecutive) years in 2006 and 2007. Seven different mixtures (runner bean, B and silage corn sole crop, C, 10% B+90% C, 20% B+80% C, 30% B+70% C, 40% B+60%C, and 50% B+50%C) of silage corn-runner bean were intercropped. All of the mixtures were grown under irrigation. The corn-runner bean fields were planted in the second week of May and harvested in the first week of September in both years. Green beans were harvested three times each year and green bean yields were recorded each time. After the 3rd harvest of green bean, residues of bean and corn together were randomly harvested from a 1 $m^{2}$ area by hand using a clipper when the bean started to dry and corn was at the dough stage. Green mass yields of each plot were recorded. Silages were prepared from each plot (triplicate) in 1 L mini-silos. After 60 d ensiling, subsamples were taken from this material for determination of dry matter (DM), pH, organic acids, chemical composition, and in vitro DM digestibility of silages. The LER index was also calculated to evaluate intercrop efficiencies with respect to sole crops. Average pH, acetic, propionic and butyric acid concentrations were similar but lactic acid and ammonia-N levels were significantly different (p<0.05) among different mixtures of bean intercropped with corn. Ammonia-N levels linearly increased from 0.90% to 2.218 as the percentage of bean increased in the mixtures up to a 50:50 seeding ratio. While average CP content increased linearly from 6.47 to 12.45%, and average NDF and ADF contents decreased linearly from 56.17 to 44.88 and from 34.92 to 33.51%, respectively, (p<0.05) as the percentage of bean increased in the mixtures up to a 50:50 seeding ratio, but DM and OM contents did not differ among different mixtures of bean intercropped with corn (p>0.05). In vitro OM digestibility values differed significantly among bean-corn mixture silages (p<0.05). Fresh bean, herbage DM, IVOMD, ME yields, and LER index were significantly influenced by percentage of bean in the mixtures (p<0.01). As the percentage of bean increased in the mixtures up to a 50:50 seeding ratio, yields of fresh bean (from 0 to 24,380 kg/ha) and CP (from 1,258.0 to 1,563.0 kg/ha) and LER values (from 1.0 to 1.775) linearly increased, but yields of herbage DM (from 19,670 to 12,550 kg/ha), IVOMD (from 12,790 to 8,020 kg/ha) and ME (46,230 to 29,000 Mcal/ha) yields decreased (p<0.05). In conclusion, all of the bean-corn mixtures provided a good silage and better CP concentrations. Even though forage yields decreased, the LER index linearly increased as the percentage of bean increased in the mixture up to a 50:50 seeding ratio, which indicates a greater utilization of land. Therefore, a 50:50 seeding ratio seemed to be best for optimal utilization of land in this study and to provide greater financial stability for labor-intensive, small farmers.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.277-289
• /
• 2009

Recently, functional MRI has been used to investigate the neurobiological mechanisms of acupuncture and the specificity of acupoint. The group data tend to be regarded as more important than the individual data in the most of previous studies. This study was designed to investigate the effect of the variability of individual data on the group results. A functional MRI (fMRI) of the whole brain was performed in fifteen healthy subjects during placebo and acupuncture stimulations at the ST36 acupoint. After remaining at rest for 30 seconds, the acupuncture was inserted and twisted at the rate of 2 Hz for 45 seconds and then the acupuncture was removed immediately. This process was repeated three times. Individual and group analyses were performed by voxel-based analyses using SPM2 software. Visual inspections of the activation and deactivation maps from individual sessions have shown the large variability across fifteen subjects. This means that the group data reflected the brain activation responses of only a few subjects. We suggest that the individual data should be presented to demonstrate the effect of acupuncture.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.33-49
• /
• 2016

The study area, located in Sinam-ri, Ulsan, in the southeastern part of the Korean Peninsula, is mainly composed of hornblende granite (ca. 65 Ma). Fracturing and reactivation of a fault striking ENE-WSW was strongly controlled by the intrusion of a mafic dyke (ca. 44 Ma), which behaves as a discontinuity in the mechanically homogeneous pluton, increasing the instability of the basement in this area. A geometric and kinematic study undertaken to interpret the faults and fractures was performed in a trench excavated almost perpendicular to the orientation of the dyke. The analysis of structural elements, such as dykes, veins, and faults, is used to infer the deformation history and to determine the paleostress orientations at the time of formation of the structures. The deformation history established based on this analysis is as follows: (1) NNE-SSW, E-W, ENE-WSW, and NE-SW trending fractures had already developed in the pluton before dyke intrusion; (2) felsic dykes intruded under conditions of σ_Hmax oriented N-S and σ_Hmin oriented E-W; (3) mafic dykes intruded under conditions of σ_Hmax oriented E-W and σ_Hmin oriented N-S; (4) dextral reactivation of the main fault associated with the development of hydrothermal quartz veins under conditions of σ_Hmax oriented E-W and σ_Hmin oriented N-S; (5) sinistral reactivation of the main fault and high-angle normal faults under conditions of σ_Hmax oriented NE-SW and σ_Hmin oriented NW-SE; and (6) dextral reactivation of the main fault and NE-SW low-angle reverse faults under conditions of σ_Hmax oriented NW-SE and σ_Hmin oriented NE-SW. These results are consistent with the tectonic history of the Pohang-Ulsan block in the southeastern part of the Korean Peninsula, and indicates the tectonic deformation of the southern area of the Ulsan fault bounded by Yangsan fault was analogous to that of the Pohang-Ulsan area from the Cenozoic. This work greatly aids the selection of sites for critical facilities to prevent potential earthquake hazards in this area.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.27-37
• /
• 2012

To investigate the effect of aquifer disturbance on hydraulic properties while well drilling at unconsolidated aquifer, the following tests were conducted: the surge block and air-surging methods, which are well development methods used after well drilling; and step-drawdown tests and constant-rate pumping tests, which are used to assess changes in the aquifer after well drilling and development. The result of step-drawdown tests indicated that drawdown for a pumping-rate of $700m^3/day$ was 21.62 m after well development, decreasing 4.39 m from 26.01 m after well drilling. The skin factor used to identify the well properties decreased from 7.92 after well drilling to 5.04 after well development, respectively, which shows the improvement of well. Constant-rate pumping tests revealed a small increase in aquifer transmissivity after well development at MW-2, -3, and -4, centering around pumping well, from $1.684{\times}10^{-3}{\sim}4.490{\times}10^{-3}m^2/sec$ to $4.002{\times}10^{-3}{\sim}4.939{\times}10^{-3}m^2/sec$. MW-1, however, showed decline in hydraulic conductivity from $1.018{\times}10^{-2}m^2/sec$ to $6.988{\times}10^{-3}m^2/sec$, which was caused by a small decrease of aquifer permeability around monitoring well MW-1 due to latent factor of air interception and clogging in aquifer during surging. This finding indicates that fine particles have an effect on hydraulic properties at unconsolidated aquifers during well drilling; therefore, we consider that well drilling and development have an effect on hydraulic properties.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.1
• /
• pp.1-9
• /
• 1999

To find pertinent soil type and maintenance method for artificial planting ground, the effects of soil compositions{sandy loam(S), vermiculite(V), sandy loam+vermiculite+sand(SVS), sandy loam+ carbonized rice husk+sand(SCS), sandy loam+humus sawdust+sand(SHS)}, and fertilizers (organic, chemical) on plant(kentuckyblue grass) growth were measured and compared from the field experiment. The results are summarized as follows 1. the highest germination rate is found from "vermiculite(V)" and the lowest from "sandy loam(S)" among tested 5 soil compositions. 2. "sandy loam+vermiculite+sand(SVS)" composition shows the highest plant height growth effect (5cm growth during tested 3 months) comparing to other 4 compositions. 3. "sandy loam+vermiculite+sand(SYS)" composition shows the highest ground covering rate after first two months, but it concede its order to "sandy loam+humus sawdust+sand(SHS)" composition after next one month growing. 4. the effects of fertilizers are follows 1) Among the blocks where no fertilizer was tried, the predominant height growth was obvious in "sandy loam+carbonized rice husk+sand(SCS)" and "sandy loam+humus sawdust+sand(SHS)" composition. 2) Among the blocks where chemical fertilizer was tried, relatively positive results were found from "vermiculite(V)" and "sandy loam+vermiculite+sand(SYS)" blocks on germination and growth rate. But on the ground coverage ratio, the effect of "sandy loam+carbonized rice husk+sand(SCS)" composite precede that of those 2 composites. 3) Among the blocks where organic fertilizer was tried, "sandy loam+humus sawdust+sand(SHS)" and "vermiculite(V)" blocks show relatively high ground coverage rate, growth rate than others. 4) When compositional differences were not considered, the block where organic fertilizer was tried shows most positive effects on all 3 measurements-germination ratio, height growth and ground covering.

• Economic and Environmental Geology
• /
• v.37 no.4
• /
• pp.413-424
• /
• 2004

A paleomagnetic investigation of the Mesozoic Daedong Supergroup and the Precambrian Seosan Group in the Kyeonggi massif is carried out to elucidate the tectonic evolution of Korea under the effect of the collision between Korea and the North/South China Blocks. For the Daedong Supergroup, the characteristic direction of D/I=74.5$^{\circ}$/36.7$^{\circ}$(k=60.7, $\alpha$=5.1$^{\circ}$) after tilt correction is better clustered than that before tilt correction (D/I=61.9$^{\circ}$/52.8$^{\circ}$, k=4.4,$$\alpha$_{95}$=21.5$^{\circ}$), indi-cating that it is a primary magnetization acquired during the formation of the rock. Paleomagnetic pole position of the formation locates at 208.0$^{\circ}$E, 24.5$^{\circ}$N (n=14, K=67.5, $A_{95}$=4.9$^{\circ}$), statistically similar to those of Middle Triassic period of the SCB, revealing that the two had occupied the same tectonic unit during this period. It is observed that only 6 out of 33 sites of the Seosan Group yield remagnetized paleomagnetic direction. The rest of the sampling sites reveals severe dispersion of magnetic directions presumably due to the consequences of the collision between Korea and the North/South China Blocks. The characteristic direction of the Seosan Group is D/I=45.7$^{\circ}$/60.1$^{\circ}$(k=41.2,$$\alpha$_{95}$=10.6$^{\circ}$) and the corresponding pole is at 195.0$^{\circ}$E, 51.6$^{\circ}$N (n=6, K=20.8, $A_{95}$=12.4$^{\circ}$). Although the pole position is close to those of Jurassic period of the Kyeonggi massif and Early Cretaceous of the Kyeongsang basin. it is interpreted that the Seosan Group was remagnetized by the influence of the emplacement of the Jurassic Daebo Granite after or at the closing stage of the orogenic episode rather than under the direct effect of deformation and/or metamorphism caused by the collision.