• 품질경영학회지
• /
• 제40권3호
• /
• pp.347-358
• /
• 2012

Purpose: Given the mixture components - process variables experimental data, we propose the strategy to find the proper combined model. Methods: Process variables are factors in an experiment that are not mixture components but could affect the blending properties of the mixture ingredients. For example, the effectiveness of an etching solution which is measured as an etch rate is not only a function of the proportions of the three acids that are combined to form the mixture, but also depends on the temperature of the solution and the agitation rate. Efficient designs for the mixture components - process variables experiments depend on the mixture components - process variables model which is called a combined model. We often use the product model between the canonical polynomial model for the mixture and process variables model as a combined model. Results: First we choose the reasonable starting models among the class of admissible product models and practical combined models suggested by Lim(2011) based on the model selection criteria and then, search for candidate models which are subset models of the starting model by the sequential variables selection method or all possible regressions procedure. Conclusion: Good candidate models are screened by the evaluation of model selection criteria and checking the residual plots for the validity of the model assumption. The strategy to find the proper combined model is illustrated with examples in this paper.

• Journal of Welding and Joining
• /
• 제32권5호
• /
• pp.65-71
• /
• 2014

Atmospheric plasma spraying (APS) is world-widely used process in the automotive industry as a method to provide wear resistance coatings for engine cylinder bore, using various materials. The weight of engine blocks can be considerably decreased by removing cast iron liners, which can finally result in the improvement of fuel efficiency. In this study, five kinds of powder materials, 1.2C steel powder and 1.2C steel powder mixed with 5, 10, 15, 20 wt.%. molybdenum powder, were deposited by atmospheric plasma spraying in order to investigate the effect of molybdenum on the wear resistance of coatings. Microstructural analysis showed that molybdenum splats were well distributed in 1.2C steel matrix with intimate bonding. The molybdenum added coatings showed better tribological properties than 1.2C steel coating. However, above the 15 wt.%. blending fraction, wear resistance was somewhat degraded with poor roughness of worn surface due to the brittle fracture occurred in molybdenum splats. Consequently, compared to conventional liner material, gray cast iron, 10 wt. pct. molybdenum blended 1.2C steel coating showed much better tribological properties and therefore it looks very feasible to replace gray cast iron liner.

• 폴리머
• /
• 제27권5호
• /
• pp.405-412
• /
• 2003

수용성 고분자인 폴리(비닐 알코올) (PVA)과 키토산에 제 4급 암모늄염을 도입하여 합성한 수용성 키토산 유도체인 N-(2-하이드록시)프로필-3-트리메틸 키토산 클로라이드 (HTCC)를 수용액 상태로 하여 용액 블렌딩하고 이를 캐스팅하여 PVA/HTCC 블렌드 필름을 제조한 후 두 고분자 사이의 혼화성과 블렌드 필름의 특성을 FT-IR, DSC, DMA 및 TGA를 사용하여 검토하였다. HTCC 함량을 50%까지 변화시킨 본 연구의 혼합 범위에서 블렌드 필름들은 모두 투명한 상태를 나타내었으며, T$_{g}$와 T$_{m}$ 이 하나로 나타나 두 고분자 사이에 혼화성이 있음을 확인하였다. 또, HTCC의 우수한 항미생물성 때문에 HTCC가 1%만 포함되더라도 블렌드 필름은 우수한 항미생물성을 나타내었다.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.332-340
• /
• 2008

Two component polyurethane (PU) flame retardant coatings were prepared by blending trichloro modified polyesters (TCMPs) and isophorone diisocyanate isocyanurate. TCMPs were synthesized by polycondensation of trichlorobenzoic acid (TCBA), a flame retardant component, with adipic acid, 1,4 butanediol, and trimethylolpropane. The content of TCBA was varied in 10, 20, and 30 wt% for the reaction. Theses new flame retardant coatings showed various properties comparable to other non flame retardant coatings. Moreover, we carried out the combustion test and the flammability test for our flame retardant coatings. The results of vertical burning test for the coatings containing more than 20 wt% of TCBA were determined as no burn. The results of flammability test for the coatings with 20 wt% and 30 wt% of TCBA contents indicated the limiting oxygen index (LOI) values of 26% and 29% respectively, which implied relatively good flame retardancy.

• 패션비즈니스
• /
• 제3권3호
• /
• pp.69-78
• /
• 1999

The purpose of this thesis is to investigate of fabric characteristics in women's wear as reviewing the fabric trends in 1990's domestic fashion. As a method to accomplish this research, I have examined the articles related to fashion fabric and fashion trend magerzines. This study considered women's wear relatively used diverse fabrics, there was not previous study regarding the fabrics used in domestic, since the 1990's. The social fators for the 1990's fashion were the influence of the informed, the increased concern for the ecological environment, the sattlement of young popular culture, the increase of resonable consume and social anxiety. To understand the fashion trends of the 1990's women's wear, it is divided three periods. The traditional period is from 1991 to 1993, the mixed period of the naturalism and the technology is from 1994 to 1995, the retro period is from 1996 to 1999. The charateristics of the fabrics used in 1990's women's wear were the appearance of various functional fabrics, the development of new synthetic fabric with high sensitivity, the popularization of circular knit, the fabrics with a retro mood toward traditional feminine mood and the blending of fabrics. The fashion of 1990 have had the characteristics of various utilization of the materials on the base of reasonable and practical trends than the changes of design and detail.

• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.90-96
• /
• 1999

Biodegradable films were prepared by solution blending method in the weight ratio of Chitosan and Algin for the purpose of useful bioimplants. The possibility of bioimplants, which prepared from natural polymers as a skin substitute and food wrapping materials were evaluated by measuring the biodegradability. these biodegradable films were inserted in the back of rats and their biodegradability was investigated by hematological change as a function of time. Rats study showed that low-Chitosan induced increments of monocyte and basophil after 48 hours of implantation. And medium-Chitosan showed increase of lymphocyte and decreased neutrophil counts after 48 hours of implantation. Low, medium Chitosan showed high hemoglobin contents, medium and high Chitosan showed high hematocrit value after 48 hours of implantation. As a result, medium, high-Chitosan induced potential incompatibility in the tissue after 48 hours, but there was little effects to the skin inflammation. The values of biodegradable films, which prepared from natural polymers measured in this study were some satisfiable results at short period with those of ideal skin bioimplants and artificial skin.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.128-134
• /
• 2005

This study was performed to evaluate the strength and durability properties of recycled concrete containing water - redispersible copolymer powder(WRP) and blast furnace slag powder(BSP) [RCWS]. Material used were cemente, recycled coarse aggregare, natural fine aggregate, water-redispersible copolymer powder, blast-furnace slag powder. Especially, Water-redispersible powder was used for blending with Inorganic binders such as cemente, gypsum and hydrated lime etc. First of all, Mixed ratio method of RCWS made Two Type. One was called type-1 which used to BSP content 5% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. Another was called Type-2 which used to BSP(blast furnace slag powder)content 10% and WRP(Water-redispersible powder) content 0%, 1%, 2%, 3%, 4%, 5%, 6%. respectively. According to the experimental results of (RCWS), Incase Type-2 at curing age 28days, Compressive strength, pulse velocity and dynamic modulous of elasticity were shown higher than Type-1 and The more WRP content increasing($0%{\sim}6%$) was the lower Compressive strength, Pulse velocity and Dynamic modulous of elasticity. Water absorption ratio was in the range of $3.85%\;{\sim}\;3.23%$, it was almost equal to Type-1, 2 but Increasing the WRP content($0%{\sim}6%$), The water absorption ratio is decreased.

• 공업화학
• /
• 제10권2호
• /
• pp.287-292
• /
• 1999

Polycarbonate (PC)를 matrix로 사용하여 전도성 고분자인 polyaniline (PANI)과의 복합체를 블렌딩 방법에 의하여 제조하였다. 용매로는 chloroform을 사용하였으며 PANI는 전하수송을 가능하게 하고 유기용매에 잘 용해될 수 있도록 camphorsulfonic acid (CSA) 혹은 dodecylbenzenesulfonic acid (DBSA)와 같은 알킬 벤젠 술폰산으로 양성화시켰다. 또한, 전도성 복합체의 전기전도성은 압축성형이 아닌 solution casting법에 의하여 향상시켰다. 아울러 양성화제 유무, PANI의 함량 또는 온도에 따라 전기전도도, 몰포로지 및 인장강도 등을 측정 분석하였다. PANI 착체의 함량이 많을수록 전기전도도는 증가하였으며 알킬사슬이 긴 DBSA로 양성화된 25 wt % PANI 착체의 전도성 복합체의 전기전도도는 3.18 S/cm까지 향상되었다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.134-139
• /
• 2008

This research investigated variations of the engine performance and the exhaust emission characteristic of a direct injection diesel engine by fueling a commercial diesel fuel, which was blended with the di-ether group (butyl-ether: BE). The smoke emission reduced to 26% from the diesel engine with the blending fuel (diesel fuel 80 vol-% + BE 20 vol-%)at the full engine load of 2500 rpm compared to it with the diesel fuel only. The power, torque and brake specific energy consumption of the diesel engine showed very slight differences. The NOx emission from the diesel engine, however, with the blended fuel was higher than with the commercial diesel fuel only. By applying EGR method, as a counter plan of the NOx reduction, this research obtained reductions of the smoke and NOx emission at the same time from the diesel engine with the BE blended diesel fuel.

• 복식문화연구
• /
• 제19권5호
• /
• pp.1061-1074
• /
• 2011

This study was conducted based on a comparative analysis of design-specific features prevalent in the Women's Wear Collection S/S 2011. As the method of this study, the denim styles were classified by various fashion design factors consisting of silhouette, fit, color, and textile fabric, which were extracted from an image database. The properties of denim fabrics associated with each fashion image were investigated to inform fabric development and washing. The results of the study show that the dense and glossy surface of the denim fabric represent a modern trend, which can be achieved by blending lyocell, tencel and rayon or by using different textiles, such as lightweight plain weave and satin instead of twill. For casual look, various washing effects were utilized jean's casual feeling like freedom and activities, while in a modern image, washing effects was restricted. And a glossy textile offers a simple modern look. The Modern image represents a simple H-silhouette and wide or straight fit in bottoms as well. Brightness can be adjusted by washing-induced bleaching. High brightness gives an elegant image, while low brightness makes a casual image. The purpose of this study is to configure a database for the development of design in the growing women's casual wear market. In addition, This study, in which the elements for specific fashion image-making were analyzed, can be used as a reference for developing denim style and fabric.