• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.469-477
• /
• 2008

Physically-based rendering is an image synthesis technique based on simulation of physical interactions between light and surface materials. Since generated images are highly photorealistic, physically-based rendering has become an indispensable tool in advanced design visualization for manufacturing and architecture as well as in film VFX and animations. Especially, BRDF (bidirectional reflectance distribution function) is critical in realistic visualization of materials since it models how an incoming light is reflected on the surface in terms of intensity and outgoing angles. In this paper, we introduce techniques to represent BRDF as B-spline volumes and to utilize them in physically-based rendering. We show that B-spline volume BRDF (BVB) representation is suitable for measured BRDFs due to its compact size without quality loss in rendering. Moreover, various CAGD techniques can be applied to B-spline volume BRDFs for further controls such as refinement and blending.

• 한국연초학회지
• /
• 제11권2호
• /
• pp.211-224
• /
• 1989

10. Three major factors, freeness, filler and blend ratio that exercised considerable influence on physical properties of cigarette papers were chosen for the sake of their optimization at this experiment. An optimization of those above factors in paper manufacturing was investigated using response surface analysis. Optimum beating degree for Kenaf, Flax and NBKP showed around 72。SR, 68。SR and 85 SR, respectively, in considering of five quality index such as porosity, tensile strength, stretch, whiteness and opacity. The best blending ration of reciprocal pulps treated under optimum beating degree were diversified and combination scope of the bast fiber (Kenaf, Flax) to the NBKP was range from 30% to 65% in case of the Kenaf, from 25 to 40% in Flax at the same receipe. The optimum range of calcium carbonate content revealed 25%~30% in Kenaf mixed NBKP and 24%~31% in Flax mixed NBKP.

• 한국식품영양학회지
• /
• 제31권1호
• /
• pp.109-116
• /
• 2018

Onion vinegar, which has an undesirable flavor and taste formed through alcohol and acetic acid fermentation, possesses additives that can improve sensory quality. Thus, the objective of this study was to present an optimized blending ratio using response surface methods for an onion vinegar beverage by adding Omija extracts. This study was performed to formulate an Omija-onion vinegar beverage (OOVB) and investigate its antioxidant properties and antimicrobiological effects. The experimental design was conducted using an optimal mixture model of response surface methodology which generated eighteen experimental trials with overall acceptance as the responses. According to the statistical analyses, OOVB demonstrated a ratio containing onion vinegar, water, brown sugar, apple extracts and Omija extracts of 10, 72.3, 4.4, 12.2 and 1.1 (weight ratio), respectively. The OOVB revealed desirable nutrition values (phenolics compounds 19.3 mg/100 g, total flavonoids 3.1 mg/100 g, quercetin 1.9 mg/100). The OOVB displayed antibacterial effects in Gram negative Enterobacter aerogenes, Escherichia coli, Salmonella typhimurium and Gram positive Staphylococcus aureus. The findings revealed that OOVB was 18% in DPPH radical inhibitionand 11% in superoxide dismutase-like activity thus, OOVB has nutritional value and good quality as well as potential biological activities for functional beverages.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.134-135
• /
• 2013

이 연구에서는 해양생물 부착 방지 도료를 만들기 위해 표면장력이 낮은 실리콘계 폴리머를 합성하여 도료를 제조하고 물리적인 특성 및 방오성을 고찰하였다. 도장 시스템은 하도/중도로 방청도료를 적용하고 상도로 제조한 도료를 사용하여 도막물성을 평가하였다. 평가결과 도막이 평활하고 낮은 표면장력과 탄력성을 지녀 해양생물의 고착 및 기계적 접착을 저해하여 우수한 방오성능을 나타냄을 확인하였다.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.61-67
• /
• 2016

This study was carried out in order to investigate the effect of pigment properties in a pre-coating layer on the characteristics of a top-coating layer and the print mottle of the coated paper. Five different pigments were applied for this study as raw materials for the pre-coating layer. The properties and print mottle of the coated paper samples were evaluated according to the coating color formulation. Type of pigments appliied in a pre-coating layer was one of the most important factor to control the properties of pre and top coating layer. Surface properties of pre and top coated paper were improved by blending GCC which had smaller particle size, with clay. Properties of a top-coating layer was affected by the pigment properties used in the pre-coating layer. It was found that print mottle of coated paper can be improved by replacing part of GCC with smaller particle size GCC or clay in pre-coating layer.

• 한국의류학회지
• /
• 제23권8호
• /
• pp.1194-1205
• /
• 1999

The hand characteristics of bast blended fabrics are studied by a subective evaluation method. To offer basic data for development of better hand of bast fiber fabrics customer's hand preference surveys are executed as well. IN this study 51 varieties of linen or ramie blended fabrics of various blending ratio density and thickness and Hansan ramie Chinese ramie and a Shingosen fabics of various blending ratio density and thickness and Hansan ramie Chinese ramie and a Shingosen farbic and used. To evaluate the hand of the fabrics subjectively nine ranks' semantic differential scale questions of 26 items are developed with adjective pairs. A seven ranks' scale is also developed to evaluate hand preferences in blouse and jacket cloths, Through subjective evaluation of bast blended fabrics the 26 items could be classified into seven kinds of hand classification : surface characteristics extensibility/drapability felling of heaviness stiffness resilience moisture property and feeling of density. The cumulative variance value explained by these seven factors is 67.18% According to the results of fabrics' preference by age groups no significant differences are found in blouse cloths but a few significant differences are found among different age groups in jacket clothes. However experts and non-experts show considerable differences on preference It can be concluded that fabrics' preference I more dependent on professionality than on age. In the survey experts. However more drapery cloths are preferred by experts and cloths with drier touch are preferred by non-experts. Experts prefer rougher less even less winding heavier and sparser fabrics but non-experts prefer rougher lighter thinner and stiffer fabrics as jacket cloths.

• International Journal of CAD/CAM
• /
• 제13권1호
• /
• pp.1-11
• /
• 2013

Just by adjusting the control points iteratively, progressive iterative approximation (PIA) presents an intuitive and straightforward scheme such that the resulting limit curve (surface) can interpolate the original data points. In order to obtain more flexibility, adjusting only a subset of the control points, a new method called local progressive iterative approximation (LPIA) has also been proposed. But to this day, there are two problems about PIA and LPIA: (1) Only an approximation process is discussed, but the accurate convergence curves (surfaces) are not given. (2) In order to obtain an interpolating curve (surface) with high accuracy, recursion computations are needed time after time, which result in a large workload. To overcome these limitations, this paper gives an explicit matrix expression of the control points of the limit curve (surface) by the PIA or LPIA method, and proves that the column vector consisting of the control points of the PIA's limit curve (or surface) can be obtained by multiplying the column vector consisting of the original data points on the left by the inverse matrix of the collocation matrix (or the Kronecker product of the collocation matrices in two direction) of the blending basis at the parametric values chosen by the original data points. Analogously, the control points of the LPIA's limit curve (or surface) can also be calculated by one-step. Furthermore, the $G^1$ joining conditions between two adjacent limit curves obtained from two neighboring data points sets are derived. Finally, a simple LPIA method is given to make the given tangential conditions at the endpoints can be satisfied by the limit curve.

• 한국항공우주학회지
• /
• 제41권6호
• /
• pp.448-457
• /
• 2013

본 논문에서는 항공기 유연날개의 플러터 억제를 위한 능동 제어시스템을 슬라이딩 모드 제어기법을 이용해 설계하였다. 제어력으로는 유연날개 뒷전 조종면 움직임으로 발생하는 공기력을 이용하였으며, 이를 위해 공탄성 모델, 조종면 작동기 모델, 돌풍 모델로 구성되는 서보 공탄성 모델링을 수행하였다. 플러터 억제를 위한 조종면 제어시스템은 슬라이딩 모드 제어기와 측정값을 이용해 상태 변수를 추정하는 칼만 필터를 조합해 구성하였으며, 수치 시뮬레이션을 통해 유연날개 모델에 대한 플러터 억제 효과를 확인하였다.

• 신재생에너지
• /
• 제8권1호
• /
• pp.18-23
• /
• 2012

The screen printing has been widely used to form silver electrodes in solar cell device due to their simplicity of process. However, the wavy and irregular surface which is believed to be originated from a screen mask mesh and thixotropic characteristics of paste on screen printing process is well-known to give a negative effect on solar cell efficiency. The dispensing method that the silver paste is extruded through micro nozzle under a moderate pressure and coated on substrate can form the silver electrode without any wavy surface. In this study, we optimize the composition of silver paste and develop paste blending condition based on the thixotropic behavior of paste. The optimized paste shows a large thixotropic loop area which is related to an aspect ratio of electrode line and has the viscosity of 40 $Pa{\cdot}s$ at 40 s-1. The electrode line we finally obtainis 67.2 ${\mu}m$ in width and has an aspect ratio of 0.277.

• Membrane and Water Treatment
• /
• 제11권4호
• /
• pp.237-245
• /
• 2020

The effects of the mixed two solvents, Dimethylacetamide (DMAc) and Dimethylformamide (DMF), and Polyethylene glycol (PEG) and Polyvinylpyrrolidone (PVP) as additives on performance of Polyvinylidene fluoride (PVDF) membranes were studied. Initially, PEG200 was used as a primary additive at fixed percentage of 5% wt. PVP was then blended with PEG200 in different concentrations. PVDF and DMAc were used as polymer and solvent in the casting solutions, respectively. To control the diffusion rate of PVP in the presence of PEG200 and PVP blend, mixtures of DMAc and DMF were used as the mixed solvent in the casting solutions. Asymmetric PVDF membranes were prepared via phase inversion process in a water bath and the effects of two additives and two solvents on the membrane morphology, pure water flux (PWF), hydrophilicity and rejection (R) were investigated. Attenuated Total Reflection Fourier Transform Infrared Spectra (ATR-FTIR) analysis was used to show the residual PVP on the surface of the membranes. Atomic Force Microscopy (AFM) was utilized to determine roughness of membrane surface. The use of mixed solvents in the casting solution resulted in reduction of PVP diffusion rate and increment of PEG diffusion rate. Eventually, PWF and R values reduced, while porosity and hydrophilicity increased.