• 제목/요약/키워드: Blending Process

검색결과 186건 처리시간 0.027초

회수수가 응집공정의 오염물질 제거 및 입자특성에 미치는 영향 (Effects of Recycled Washwater on Pollutant Removal and Particle Characteristics during Coagulation)

  • 문병현;김승현;박미선;이향인;이강춘
    • 한국환경과학회지
    • /
    • 제11권9호
    • /
    • pp.955-960
    • /
    • 2002
  • The recycled washwater, which has different water quality and is produced about 5 to 20% of the total water volume treated, affects the unit operation of water treatment, especially coagulation process. However, the effects of recycled washwater on unit operation of water treatment have not been fully investigated. In this study, effects of recycled washwater on coagulation process were investigated to find the optimum coagulation condition by analyzing turbidity, $UV_{254}$, TOC removal efficiencies. In addition, effects of recycled washwater on residual Al after coagulation were studied by analyzing soluble and particulate Al. The size distribution and fractal dimension of coagulated also analyzed. The recycled washwater was lower pH than the raw water. And the recycled washwater had higher $UV_{254}$, TOC and residual Al concentration than the raw water. Residual Al concentration of recycled washwater was about 50 times higher than that of raw water. Optimum coagulant dosages on the blending recycled washwater and the raw water for turbidity, $UV_{254}$ and Al removal were lower than that on the raw water. However, TOC removal increased by increasing coagulant dosage. The size and fractal dimension of coagulated particle produced in the blending recycled washwater were larger, which imply faster settling velocity, than those produced in the raw water only.

도시철도 전차의 정위치 정차 제어에 관한 연구 (A Study on the precious stopping control for the automatic electric rail cars)

  • 박문규;김규식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
    • /
    • pp.228-230
    • /
    • 2006
  • While trains perform a complete precision stopping control at stop point, it is essential to keep better commuters comfort in prompt. Because a train's brake force tends to increase a brake effort in a low speed and a low brake effort, a brake force in motor cars must be increased to keep better passenger comfort, to control the special braking qua1ities and to prevent the impact of the automatic coupler rather than trailer's, Rail cars must have a special braking process for the train stopping control. In the train stop mode, the train stopping control is designed to start at 20km/h. It starts by Dynamic brake blending, and then finally stops by only the friction. If these process are not exactly activated, the train may fail a complete precision stop. In this report, it studied the electric and friction brake processing during the precious stopping control. To achieve exact test results, the speed reference has to be reduced the calculated difference. In the precision stopping control. the ways of the keeping brake force in motor car was analyzed and some solutions of controling air pressure was brought up by means of direct test in main line, This study was based on line 5 in Seoul Metropolitan subway.

  • PDF

피혁 제조 공정 중 발생하는 폐돈지를 이용한 음이온성 계면활성제 제조 및 특성 (Preparation and Characteristics of Anionic Surfactant Using Waste Fleshing Scrap)

  • 신수범;민병욱;양승훈;박민석;원기천;백두현
    • 한국염색가공학회지
    • /
    • 제18권6호
    • /
    • pp.31-36
    • /
    • 2006
  • Study has been made for producing anionic surfactant using waste fleshing scraps from the leather making process through refining, esterification, sulfonation and blending processes. As a most optimum lard oil refining method, refining was carried out for 4 hours under temperature of $120^{\circ}C$ and approximately 200 mbar vacuum, which gave a recovery of more than 80% lard oil. Refined lard oil obtained thus was undergone methlyl-esterification, then sulfonated to make a degreasing agent. By methyl-esterification using lard oil, more than 85% of fatty acid and $12{\sim}13%$ of glycerine were extracted from the oil. Sulfonation of the extracted fatty acid ester lard oil has shown most optimum at $15{\sim}20%$ chlorosulfonic acid content, and the content of bonding sulfate at this time was higher than 3.5%. Finally the followed anionic surfactant having degreasing force of 80% and higher could be made by blending process.

Use of Binder Treatment to Enhance Properties of Premixes

  • Gelinas, Claude;St-Laurent, Sylvain
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.706-707
    • /
    • 2006
  • Premixes treated with a binder, such as in the FLOMET process, exhibit better flow, reduced dusting and segregation and improved productivity and part consistency compared to conventional premixes. The binder treatment is highly suitable for high performance P/M applications which often require premixes containing very fine alloying additives and excellent die filling characteristics. With this process, various binders and lubricants can be utilized in order to make premixes with unique properties. In this paper, the characteristics and performances of bonded premixes are reported.

  • PDF

INLINE NEAR INFRARED (NIR) SPECTROSCOPY FOR PROCESS CONTROL IN POLYMER EXTRUSION

  • Rohe, Thomas;Koelle, Sabine;Becker, Wolfgang;Eisenreich, Norbert;Eyerer, Peter
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1082-1082
    • /
    • 2001
  • Extrusion is one of the most important processes in polymer industry. The characterization of the polymer melt during processing will improve this process noticeably, One possibility of characterizing the actual processed polymer melt is the inline near infrared (NIR) spectroscopy, With this method several polymer properties can be observed during processing, e.g. composition, moisture ormechanical properties of the melt. For this purpose probes for transmission and reflection measurements have been developed, withstanding the high temperatures and pressures appearing during extrusion process (tested up to 300$^{\circ}C$ and 10 ㎫). For the transmission system an optical bypass was developed to eliminate disturbing spectral influences and hence increase the long term stability, which is the prerequisite for an industrial application. Measurements in transmission and reflection produced comparable results (or blending processes, where the prediction error was less than 1%. An optimum RMSEP of only 0.24% was found for preprocessed polymer blends measured in transmission on a laboratory extruder. A transflection measurement allowed for the first time the recording of relevant NIR-spectra in the screw area of an extruder. The application to a (PE+PP) blending process delivered promising results. This new measurement mode allows the observation of the ongoing processes within the screw area, which is of maximum Interest for reactive extrusion processes. Due to economic reasons the calibration transfer between different extrusion systems is also of high importance. Investigations on simulated and real-world spectra showed that a calibration transfer is possible. A new method alternatively to the well-known direct standardization procedures was developed, which is based on an automatic data pretreatment. This procedure delivers comparable results for the calibration transfer. Overall this paper presents concepts, components and algorithms for the inline near infrared (NIR) spectroscopy for polymer extrusion, which allows the use of it in a real industrial extrusion process.

  • PDF

제지식 판상엽의 공정 개선 연구 (A study on the Process Improvement of Papermade Reconstituted Tobacco)

  • 김영호;한영림;김근수;김대종
    • 한국연초학회지
    • /
    • 제22권2호
    • /
    • pp.164-169
    • /
    • 2000
  • The reconstituted tobacco leaves(RTL) playa major part in the control of the low density and tar cigarette. Reconstituted tobacco manufactured by the papermaking process has much higher filling power than homogenized tobacco manufactured by slurry and rolling process. Fragile reconstituted tobaccos are liable to lead to small particles detrimental for filling power so they must be properly flexible. This work was conducted to determine the effect of CaCO$_3$ addition in paper-making process on the filling power and the flexibility of the reconstituted tobacco and to obtain the fundamental informations for improving the quality of domestic reconstituted tobacco. We analyzed the wood fiber species, the filler level, the fiber length, the fineness level and observed the surface of the RTL. From the obtained results, we could determine that foreign reconstituted tobacco was manufactured by blending softwood with hardwood and over 8% of calcium carbonate at the addition level. The domestic RTL has much higher fine fiber level by 23.2 % than that of foreign, so the refining treatment process and the condition must be reoptimized for the improvement of RTL quality.

  • PDF

반고형 사과 이유보충식의 제조 (Preparation of Semi-Solid Apple-Based Baby Food)

  • 손경희;김미란;임성경;박현경;박옥진
    • 한국식품과학회지
    • /
    • 제34권1호
    • /
    • pp.43-50
    • /
    • 2002
  • 사과를 이용한 반고형 이유보충식을 개발하고자 사과퓨레의 다양한 제조조건에 따른 갈변정도와 이화학적 특성, ascorbic acid 첨가에 의한 갈변억제 효과를 살펴보고, 레토르트 이유보충식의 제조 가능성을 알아보았다. 사과퓨레의 점도는 $2,600{\sim}5,856\;cp$였으며, 펙틴의 주골격인 무수갈락투론산은 $4.15{\sim}11.92\;mg%$이고 측쇄인 중성당은 $6.18{\sim}10.65\;mg%$였다. 유리당은 fructose$(5.43{\sim}8.87%)$, glucose$(2.11{\sim}4.23%)$, sucrose$(1.64{\sim}2.94%)$을 함유하고 있었다. Ascorbic acid 함량은 $1.54{\sim}1.83\;mg%$로 퓨레 제조과정에서 열처리에 의해 상당량이 파괴된 것으로 생각된다. 사과퓨레 제조시 열처리를 하지 않고 blending 후 가열하는 방법(A)은 상대적으로 L값이 낮고 적색도 a값이 높고 외관상으로도 갈변이 많이 진행되었지만 관능특성과 이화학적 특성면에서는 높은 평가를 받아 갈변현상을 효과적으로 억제할 필요성이 대두되었다. Steaming 후 blending하여 가열하는 방법(B)은 전체적인 선호도에서 높은 평가를 받았다. Blanching 후 blending하여 가열하는 방법(C)는 영양소 함량과 질감 및 맛에 대한 관능평가에서 상대적으로 떨어져서 다음 단계의 실험에서 제외되었다. 이를 보완하기 위해 갈변억제제로 sodium ascorbic acid를 사과퓨레의 제조시 침지과정(1), blending 과정(2), 가열 과정(3), blending 및 가열 과정(4)에 각각 첨가하였을 때, 사과퓨레 제조방법 A와 B 모두에서 첨가방법 2가 상대적으로 갈변억제 효과가 컸다. 색의 선호도 조사에서 가장 높은 평가를 받은 제조방법 B-첨가방법 2를 사과 이유보충식의 제조법으로 채택하고 살균 전후의 이화학적 특성과 관능특성을 비교하였다. 레토르트 살균 후 점도는 3,477 cp에서 2,294 cp로 감소하였고, 수용성 비타민에서 thiamin은 완전히 파괴되었으며 riboflavin은 41%, ascorbic acid는 21% 감소하였다. 그러나 레토르트 살균이 유리당과 유리 아미노산의 함량 그리고 관능특성에는 큰 영향을 주지 않아 사과를 steaming하고, sodium ascorbic acid를 blending 과정에서 첨가하는 방법이 레토르트 사과 이유보충식의 제조법으로 적합한 것으로 평가되었다.

저가 탄소섬유용 Lignin/Chlorinated Polyvinyl Chloride 블렌딩 섬유의 제조 및 특성 (Preparation and Characterization of Lignin/Chlorinated Polyvinyl Chloride Blended Fibers for Low-cost Carbon Fiber)

  • 조채현;이상오;강다경;홍성화;강찬규;이재웅
    • 한국염색가공학회지
    • /
    • 제32권2호
    • /
    • pp.111-120
    • /
    • 2020
  • In this study, lignin/chlorinated poly(vinyl chloride)(CPVC) blended fibers have been produced for the development of low-cost carbon fiber. Carbon fiber manufacturing was accomplished through stabilization and carbonization process. The lignin/CPVC blended fibers were prepared by wet spinning method. Dimethylacetamid e(DMAc) and cychlohexanone in a ratio of 5:1(wt%) was employed as co-solvent. The ratio of lignin/CPVC was prepared at 0/10, 1/9, 2/8, 3/7, 4/6, and 5/5(wt%). The spinning solution was extruded at a rate of 0.1 to 0.4ml/min according to the blending ratio. The speed of the rollers was the same for all ratios(draw ratio=1). Analysis of fiber cross-section by scanning eletron microscopy(SEM) showed that as the lignin ratio increased in the same coagulation bath and distilled water, the pore size of the spinning fiber decreased. Therefore, the highest tensile strength of the blending fibers was 6.3±1.2MPa at the 5/5 ratio. The carbon fiber also showed the best tensile strength of 120.78±2.43MPa at 5/5 ratio.

사출 블렌드 저밀도 폴리에틸렌의 절연파괴 특성 (Electrical Breakdown Properties of Extrusion Blended Low Density Polyethylene)

  • 조돈찬;김형주;신현택;이충호;이수원;홍진웅
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.593-596
    • /
    • 2001
  • In the previous work, the effect of blending with two kinds of low density polyethylene (LDPE) on physical and electrical properties have been investigated. From the results, blending with two kinds of LDPE was effective method on changing the morphology of LDPE and improving the high-field characteristics in high temperature region. Especially, it suggested that the F$\_$BImp/ was associated with the changes of the crystal size. In this work, the relationship between the morphology and the high-field characteristics of blended LDPE was discussed. In addition, the physical and electrical properties of blended LDPE with extrusion treatment were investigated. The two groups of specimen were prepared; Group 1 was prepared by passing 1 time through the extruder included in the film-blowing process, and Group 2 was prepared by passing 2 times through the extruder. From the relation between the crystal size which was perpendicular to the (020) plane and the F$\_$BImp/ of blended LDPE, it was confirmed that the F$\_$BImp/ was associated with the changes of crystal size due to the blending. Moreover, the F$\_$BImp/ of blended LDPE in Group 2 was higher than that of blended LDPE in Group 1. The crystal size of the (020) plane became smaller according to the extrusion treatment. These results suggest that the uniform distribution and dispersion of crystalline occurred due to the extrusion treatment and the morphological change due to the extrusion treatment influenced on the electrical properties of blended LDPE.

  • PDF

Chloride Meter(CL-2Z형)를 이용한 담배잎 중 chloride의 신속한 검정방법 (Rapid Quantification of Chloride in Tobacco Leaves by a Chloride Meter (Model: CL-2Z))

  • 이미경;정훈채;김용연;윤연현
    • 한국연초학회지
    • /
    • 제28권2호
    • /
    • pp.83-93
    • /
    • 2006
  • The aim of this study is to develop a simple and rapid field method for the determination of chloride content in tobacco green or cured leaves. To set up a practical process, several factors such as the proper sampling position of each leaf, the size of leaf lamina pieces for blending, the substitution of deionized water fur the extracting solution, 0.1N $HNO_3$, the submerging durations before blending, and the standing times before measuring were studied using flue-cured and burley tobacco with a stable and reproducible Chloride Meter, KRK CL-2Z. From the results, chloride contents of tobacco leaves could be analyzed with the Chloride Meter(CL-2Z) using the suspension of 14 mm diameter leaf disks after soaking in distilled water for 30 min., blending with a mini-blender for 30 seconds. The chloride contents measured in this way showed highly significant correlations with ones by the conventional potentiometric method using an ion meter-chloride electrode and $AgNO_3$ titration. In our method, the procedures such as drying, powdering and weighing samples, and using chemical reagents for extraction (0.1N $HNO_3$) and titration(0.028N $AgNO_3$) could be eliminated. These results suggest that the newly constructed method using the Chloride Meter is more efficient to determine the chloride content of tobacco leave in comparison with the one by the Ion $Meter:AgNO_3$ titration.