• 공업화학
• /
• 제7권3호
• /
• pp.504-510
• /
• 1996

새로운 상용성 조절 기법인 compositional quenching 공정을 이용하여 LDPE(Low-density polyethylene)/LLDPE(Linear low-density polyethylene) 블렌드를 제조하고, 기존의 mechanical blending과 solution blending 방법으로 제조한 블렌드와 물성 등을 비교 고찰하였다. DSC thermogram에서는 $T_m$ peak와 $T_c$ peak가 세 가지 블렌드 방법에 따라 변하였다. Compositional quenching 공정에 의한 블렌드의 열적 성질은 solution blending에 의한 블렌드와 거의 유사하였으나 mechanical blending에 의한 블렌드와는 서로 다른 경향을 보였다. 이러한 결과는 matrix 내에 분산된 domain 크기에 의한 것으로 생각된다. 인장실험에서는 compositional quenching 공정과 solution blending에 의한 블렌드의 파괴신율이 mechanical blending방법에 의한 것에 비해 상대적으로 컸으며, Young's modulus는 mechanical blending에 의한 결과가 상대적으로 컸다. 또한 compositional quenching 공정과 solution blending에 의한 블렌드의 인장강도가 mechanical blending에 의한 것보다 큰 경향을 보였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.488-492
• /
• 1993

This paper proposes a new approach to the optimization method of a blending process with neural network. The method is based on the error backpropagation learning algorithm for neural network. Since the neural network can model an arbitrary nonlinear mapping, it is used as a system solver. A fuzzy membership function is used in parallel with the neural network to minimize the difference between measurement value and input value of neural network. As a result, we can guarantee the reliability and stability of blending process by the help of neural network and fuzzy membership function.

• Journal of Pharmaceutical Investigation
• /
• 제39권1호
• /
• pp.29-36
• /
• 2009

Since the quality of final products is significantly affected by the homogeneity of powder mixture, the powder blending process has been regarded as one of the critical pharmaceutical unit processes, especially for solid dosage forms. Accordingly, the monitoring to determine a blending process' end-point based on a faster and more accurate in-line/on-line analysis has attracted enormous attentions recently. Among various analytical tools, NIR (near-infrared) spectroscopy has been extensively studied for PAT (process analytical technology) system due to its many advantages. In this study, NIR spectroscopy was employed with an optical fiber probe for the in-line monitoring of fluid-bed blending process. The position of the probe, the ratio of binary powder mixture, the powder size differential and the back-flush period of the shaking bag were examined as principal process parameters. During the blending process of lactose and mannitol powders, NIR spectra were collected, corrected, calibrated and analyzed using MSC and PLS method, respectively. The probe position was optimized. A reasonable end-point was predicted as 1,500 seconds based on 5% RSD value. As a consequence, it was demonstrated that the blending process using a fluid-bed processor has several advantages over other methods, and the application of NIRS with an optical fiber probe as PAT system for a fluid-bed blending process could be high feasible.

• 방사성폐기물학회지
• /
• 제16권1호
• /
• pp.65-82
• /
• 2018

With the significant increase in spent ion-exchange resin generation, to meet the requirements of Waste Acceptance Criteria (WAC) of the Wolsong disposal facility in Korea, blending is considered as a method for enhancing disposal options for intermediate level waste from nuclear reactors. A mass balance formula approach was used to enable blending process with an appropriate mixing ratio. As a result, it is estimated around 44.3% of high activity spent resins can be blended with the overall volume of low activity spent resins at a 1:7.18 conservative blending ratio. In contrast, the reduction of high activity spent resins is considered a positive solution in reducing the amount of spent resins stored. In an economic study, the blending process has been proven to lower the disposal cost by 10% compared to current APR1400 treatment. Prior to commencing use of this blending method in Korea, coordinated discussion, and safety and health assessment should be undertaken to investigate the feasibility of fitting this blending method to national policy as a means of waste predisposal processing and management in the future.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.40-50
• /
• 2007

The present contribution describes the application of elliptic-blending second moment closure to predict the gas cooling process of turbulent super-critical carbon dioxide flow in a square cross-sectioned duct. The gas cooling process under super-critical state experiences a drastic change in thermodynamic and transport properties. Redistributive terms in the Reynolds stress and turbulent heat flux equations are modeled by an elliptic-blending second moment closure in order to represent strongly non-homogeneous effects produced by the presence of walls. The main feature of Durbin's elliptic relaxation second moment closure that accounts for the nonlocal character of pressure-velocity gradient correlation and the near-wall inhomogeneity guaranteed by the elliptic blending second moment closure.

• 펄프종이기술
• /
• 제45권2호
• /
• pp.27-32
• /
• 2013

To improve the physical properties, such as swelling and flexibility, of the cotton fiber, sodium hydroxide or cellulase was used for pretreatment before the beating process. Titanium dioxide was blended during beating process to improve the fibrillation of cotton fibers and even distribution of fillers to cotton fibers. Blending with titanium dioxide during beating process, led to improve the tensile strength and beating degree This treatment also improved the opacity, resulted by well dispersed titanium dioxide during blending. By the blending of titanium dioxide during beating process, similar impact of cotton fiber with cellulase or sodium hydroxide pretreatment was achieved. To improve the tensile strength and opacity of cotton paper simultaneously, titanium dioxide blending in during beating process was found as effective treatment.

• 에너지공학
• /
• 제6권2호
• /
• pp.152-161
• /
• 1997

석탄을 건류하여 코크스를 제조 시, 사용되는 석탄의 특성에 따른 적정 노온 관리를 통해서 에너지비용을 절감할 수 있을 뿐만 아니라 코크스로의 수명을 연장시킬 수 있다. 따라서 본 연구에서는 원료탄의 배합과 성상에 따른 코크스로 내의 열전달 및 온도 분포를 예측하기 위해서 Merrick의 모델을 배경으로 수학적 모델과 프로그램을 개발하였다. 본 연구에서 개발한 전산 모델을 광양 제철소의 코크스로에 적용하여 신뢰성을 확인함으로써 실제 공정의 조업 기준 설정과 기존 시설에 대한 개선 가능성을 판단할 수 있을 것으로 기대된다.

• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.231-237
• /
• 2020

본 논문에서는 포아송 방정식을 기반으로 하는 영상 합성에 있어서 합성된 영상의 자연성을 향상시키기 위한 효율적인 동영상 혼합 블랜딩 기법을 제안한다. 영상 블랜딩 과정에서는 영상 합성의 목적에 따라 포아송 블랜딩과 알파 브랜딩 등 다양한 방법이 사용되고 있다. 본 논문에서 제안하는 혼합 블랜딩 방식은 포아송 블랜딩과 알파 블랜딩의 장점들을 조합함으로써 합성 영상에서 이음매가 없고 또한 객체의 색상 왜곡이 감소되는 특징을 갖는다. 먼저 소스 영상의 객체를 포아송 블랜딩 방법으로 합성한 후, 블랜딩 된 객체와 원래의 객체의 색차를 비교한다. 그리고 색차값이 임계값 이상인 경우, 소스 영상의 객체에 대해 알파 블랜딩을 수행하고 이를 포아송 블랜딩 된 객체와 가중치를 부여하여 합산한다. 모의실험과 분석을 통해 제안된 방법이 포아송 블랜딩과 알파 블랜딩에 비해 합성 영역의 자연성이 우수할 뿐 아니라 요구되는 계산량도 비교적 적다는 것을 볼 수 있다.

• 상하수도학회지
• /
• 제33권4호
• /
• pp.281-289
• /
• 2019

Desalination plants are generally studied with higher operating costs compared to water supply facilities. This study was conducted to reduce the cost of water production and to preserve existing water resources. Therefore, the purpose of this study was to utilize the control valves to increase maximum efficiency, thereby reducing the power of the pumps and operating costs. Specific energy consumption was shown to reduce the process operating power by up to 1.7 times from 6.17 to $3.55kWh/m^3$ based on seawater reverse osmosis 60 bar. In addition, the water intake process was divided into pre, inter, and post-according to the use method of blasting, and the water treatment process was divided into pre, inter, and post blending. In order to reduce power consumption, the blending process was combined to operate the facility, which resulted in the reduction of power consumption in the order post > pre-inter> inter blending.

• 한국식품조리과학회지
• /
• 제15권3호
• /
• pp.238-243
• /
• 1999

보리로부터 전분을 분리하는 공정을 개발하기 위해 blending 처리, ${eta}$-glucanase 처리 및 alkali 처리를 병행한 최적조건을 검토하였다. Blending 처리에 의한 전처리 효과를 조사한 결과 blending 처리를 6회 했을 경우에 전분수율이 29.7%로 나타냈으며 단백질 3.2%, 지방0.7%, 섬유소 0.4%, 회분 0.4%, ${eta}$-glucan 2.8%를 함유한 전분을 분리하였다 단백질과 ${eta}$-glucan의 용출효과를 조사하기 위해 $eta$-glucanase 처리의 최적조건을 검토한 결과 ${eta}$-glucanase 첨가량 60,000 unit, 맥분과 물의 양1/2, 반응온도 $45^{\circ}C$, pH6.5, 침지 6시간 때에 효과적인 용출을 보였다. 전분의 수율증대와 순도를 높이기 위해 0.2% NaOH 용액을 사용한 alkali 처리조건을 조사한 결과 침지 2시간 때에 전분함량은 ${eta}$-glucanase 처리 후의 전분함량과 비교하여 볼 때 25%가 증가한 76.7%(w/w)로 나타났으며 단백질 0.2%, ${eta}$-glucan 0.1%의 최종 전분을 분리하였다.