• Journal of Environmental Science International
• /
• v.11 no.9
• /
• pp.955-960
• /
• 2002

The recycled washwater, which has different water quality and is produced about 5 to 20% of the total water volume treated, affects the unit operation of water treatment, especially coagulation process. However, the effects of recycled washwater on unit operation of water treatment have not been fully investigated. In this study, effects of recycled washwater on coagulation process were investigated to find the optimum coagulation condition by analyzing turbidity, $UV_{254}$, TOC removal efficiencies. In addition, effects of recycled washwater on residual Al after coagulation were studied by analyzing soluble and particulate Al. The size distribution and fractal dimension of coagulated also analyzed. The recycled washwater was lower pH than the raw water. And the recycled washwater had higher $UV_{254}$, TOC and residual Al concentration than the raw water. Residual Al concentration of recycled washwater was about 50 times higher than that of raw water. Optimum coagulant dosages on the blending recycled washwater and the raw water for turbidity, $UV_{254}$ and Al removal were lower than that on the raw water. However, TOC removal increased by increasing coagulant dosage. The size and fractal dimension of coagulated particle produced in the blending recycled washwater were larger, which imply faster settling velocity, than those produced in the raw water only.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.228-230
• /
• 2006

While trains perform a complete precision stopping control at stop point, it is essential to keep better commuters comfort in prompt. Because a train's brake force tends to increase a brake effort in a low speed and a low brake effort, a brake force in motor cars must be increased to keep better passenger comfort, to control the special braking qua1ities and to prevent the impact of the automatic coupler rather than trailer's, Rail cars must have a special braking process for the train stopping control. In the train stop mode, the train stopping control is designed to start at 20km/h. It starts by Dynamic brake blending, and then finally stops by only the friction. If these process are not exactly activated, the train may fail a complete precision stop. In this report, it studied the electric and friction brake processing during the precious stopping control. To achieve exact test results, the speed reference has to be reduced the calculated difference. In the precision stopping control. the ways of the keeping brake force in motor car was analyzed and some solutions of controling air pressure was brought up by means of direct test in main line, This study was based on line 5 in Seoul Metropolitan subway.

• Textile Coloration and Finishing
• /
• v.18 no.6 s.91
• /
• pp.31-36
• /
• 2006

Study has been made for producing anionic surfactant using waste fleshing scraps from the leather making process through refining, esterification, sulfonation and blending processes. As a most optimum lard oil refining method, refining was carried out for 4 hours under temperature of $120^{\circ}C$ and approximately 200 mbar vacuum, which gave a recovery of more than 80% lard oil. Refined lard oil obtained thus was undergone methlyl-esterification, then sulfonated to make a degreasing agent. By methyl-esterification using lard oil, more than 85% of fatty acid and $12{\sim}13%$ of glycerine were extracted from the oil. Sulfonation of the extracted fatty acid ester lard oil has shown most optimum at $15{\sim}20%$ chlorosulfonic acid content, and the content of bonding sulfate at this time was higher than 3.5%. Finally the followed anionic surfactant having degreasing force of 80% and higher could be made by blending process.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.706-707
• /
• 2006

Premixes treated with a binder, such as in the FLOMET process, exhibit better flow, reduced dusting and segregation and improved productivity and part consistency compared to conventional premixes. The binder treatment is highly suitable for high performance P/M applications which often require premixes containing very fine alloying additives and excellent die filling characteristics. With this process, various binders and lubricants can be utilized in order to make premixes with unique properties. In this paper, the characteristics and performances of bonded premixes are reported.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1082-1082
• /
• 2001

Extrusion is one of the most important processes in polymer industry. The characterization of the polymer melt during processing will improve this process noticeably, One possibility of characterizing the actual processed polymer melt is the inline near infrared (NIR) spectroscopy, With this method several polymer properties can be observed during processing, e.g. composition, moisture ormechanical properties of the melt. For this purpose probes for transmission and reflection measurements have been developed, withstanding the high temperatures and pressures appearing during extrusion process (tested up to 300$^{\circ}C$ and 10 ㎫). For the transmission system an optical bypass was developed to eliminate disturbing spectral influences and hence increase the long term stability, which is the prerequisite for an industrial application. Measurements in transmission and reflection produced comparable results (or blending processes, where the prediction error was less than 1%. An optimum RMSEP of only 0.24% was found for preprocessed polymer blends measured in transmission on a laboratory extruder. A transflection measurement allowed for the first time the recording of relevant NIR-spectra in the screw area of an extruder. The application to a (PE+PP) blending process delivered promising results. This new measurement mode allows the observation of the ongoing processes within the screw area, which is of maximum Interest for reactive extrusion processes. Due to economic reasons the calibration transfer between different extrusion systems is also of high importance. Investigations on simulated and real-world spectra showed that a calibration transfer is possible. A new method alternatively to the well-known direct standardization procedures was developed, which is based on an automatic data pretreatment. This procedure delivers comparable results for the calibration transfer. Overall this paper presents concepts, components and algorithms for the inline near infrared (NIR) spectroscopy for polymer extrusion, which allows the use of it in a real industrial extrusion process.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.164-169
• /
• 2000

The reconstituted tobacco leaves(RTL) playa major part in the control of the low density and tar cigarette. Reconstituted tobacco manufactured by the papermaking process has much higher filling power than homogenized tobacco manufactured by slurry and rolling process. Fragile reconstituted tobaccos are liable to lead to small particles detrimental for filling power so they must be properly flexible. This work was conducted to determine the effect of CaCO$_3$ addition in paper-making process on the filling power and the flexibility of the reconstituted tobacco and to obtain the fundamental informations for improving the quality of domestic reconstituted tobacco. We analyzed the wood fiber species, the filler level, the fiber length, the fineness level and observed the surface of the RTL. From the obtained results, we could determine that foreign reconstituted tobacco was manufactured by blending softwood with hardwood and over 8% of calcium carbonate at the addition level. The domestic RTL has much higher fine fiber level by 23.2 % than that of foreign, so the refining treatment process and the condition must be reoptimized for the improvement of RTL quality.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.43-50
• /
• 2002

To develop commercial semi-solid apple baby food, the physicochemical characteristics of apple puree in relation to different preparing methods and the effect of the addition methods of ascorbic acid on browning reaction were investigated. The preparing methods were classified into 3 groups by initial heating treatment: no heating (A), steaming at $120^{\circ}C$ (B), and blancing at $100^{\circ}C$ (C). The viscosity of tested apple puree was $2,600{\sim}5,856\;cp$, and contents of anhydrogalaturonic acid (AGA) and neutral sugar ranged $4.15{\sim}11.92\;mg%$ and $6.18{\sim}10.65\;mg%$, respectively. Among free sugars tested, level of fructose was the highest $(5.43{\sim}8.87%)$, followed by glucose $(2.11{\sim}4.23%)$, sucrose $(1.64{\sim}2.94%)$, in that order. Since small amounts of ascorbic acid were detected $(1.54{\sim}1.83\;mg%)$, it seemed to be lost by heating process in preparing of apple puree. For apple puree A, its lightness was lower and redness was higher than those of apple puree B and C. Its degree of browning of apple puree was so high that sodium ascorbic acid was added as a antibrowning agent. Puree had low sensory score and nutrient quality. The adding methods of ascorbic acid were classified into 4 groups by adding time: dipping, blending (2), heating (3), and blending + heating (4). Considering color and preference evaluation, preparing method B and adding method 2 showed the highest inhibitory activity on apple puree browning and desirable color for retort baby food. After retort sterilization, the viscosity of apple baby food was decreased from 3,477 cp to 2,294 cp, thiamin was destroyed completely, and the contents of riboflavin and ascorbic acid were decreased 41% and 21%, respectively. However, contents of free sugar and free amino acid and sensory parameter were not influenced by retort sterilization. In overall, the preparing method B-adding method 2 was a good processing condition for the retort apple baby food.

• Textile Coloration and Finishing
• /
• v.32 no.2
• /
• pp.111-120
• /
• 2020

In this study, lignin/chlorinated poly(vinyl chloride)(CPVC) blended fibers have been produced for the development of low-cost carbon fiber. Carbon fiber manufacturing was accomplished through stabilization and carbonization process. The lignin/CPVC blended fibers were prepared by wet spinning method. Dimethylacetamid e(DMAc) and cychlohexanone in a ratio of 5:1(wt%) was employed as co-solvent. The ratio of lignin/CPVC was prepared at 0/10, 1/9, 2/8, 3/7, 4/6, and 5/5(wt%). The spinning solution was extruded at a rate of 0.1 to 0.4ml/min according to the blending ratio. The speed of the rollers was the same for all ratios(draw ratio=1). Analysis of fiber cross-section by scanning eletron microscopy(SEM) showed that as the lignin ratio increased in the same coagulation bath and distilled water, the pore size of the spinning fiber decreased. Therefore, the highest tensile strength of the blending fibers was 6.3±1.2MPa at the 5/5 ratio. The carbon fiber also showed the best tensile strength of 120.78±2.43MPa at 5/5 ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.593-596
• /
• 2001

In the previous work, the effect of blending with two kinds of low density polyethylene (LDPE) on physical and electrical properties have been investigated. From the results, blending with two kinds of LDPE was effective method on changing the morphology of LDPE and improving the high-field characteristics in high temperature region. Especially, it suggested that the F$\_$BImp/ was associated with the changes of the crystal size. In this work, the relationship between the morphology and the high-field characteristics of blended LDPE was discussed. In addition, the physical and electrical properties of blended LDPE with extrusion treatment were investigated. The two groups of specimen were prepared; Group 1 was prepared by passing 1 time through the extruder included in the film-blowing process, and Group 2 was prepared by passing 2 times through the extruder. From the relation between the crystal size which was perpendicular to the (020) plane and the F$\_$BImp/ of blended LDPE, it was confirmed that the F$\_$BImp/ was associated with the changes of crystal size due to the blending. Moreover, the F$\_$BImp/ of blended LDPE in Group 2 was higher than that of blended LDPE in Group 1. The crystal size of the (020) plane became smaller according to the extrusion treatment. These results suggest that the uniform distribution and dispersion of crystalline occurred due to the extrusion treatment and the morphological change due to the extrusion treatment influenced on the electrical properties of blended LDPE.

• Journal of the Korean Society of Tobacco Science
• /
• v.28 no.2
• /
• pp.83-93
• /
• 2006

The aim of this study is to develop a simple and rapid field method for the determination of chloride content in tobacco green or cured leaves. To set up a practical process, several factors such as the proper sampling position of each leaf, the size of leaf lamina pieces for blending, the substitution of deionized water fur the extracting solution, 0.1N $HNO_3$, the submerging durations before blending, and the standing times before measuring were studied using flue-cured and burley tobacco with a stable and reproducible Chloride Meter, KRK CL-2Z. From the results, chloride contents of tobacco leaves could be analyzed with the Chloride Meter(CL-2Z) using the suspension of 14 mm diameter leaf disks after soaking in distilled water for 30 min., blending with a mini-blender for 30 seconds. The chloride contents measured in this way showed highly significant correlations with ones by the conventional potentiometric method using an ion meter-chloride electrode and $AgNO_3$ titration. In our method, the procedures such as drying, powdering and weighing samples, and using chemical reagents for extraction (0.1N $HNO_3$) and titration(0.028N $AgNO_3$) could be eliminated. These results suggest that the newly constructed method using the Chloride Meter is more efficient to determine the chloride content of tobacco leave in comparison with the one by the Ion $Meter:AgNO_3$ titration.