• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1848-1856
• /
• 2013

This study is designed to examine the change in physical properties of extruded brown rice-vegetable mix at different temperatures and $CO_2$ gas injections. Moisture content and screw speed were fixed to 27% and 100 rpm respectively. Die temperatures and $CO_2$ gas injections were adjusted to 60, 80, $100^{\circ}C$ and 0, 150 mL/min, respectively. The ratio of ${\alpha}$-brown rice, brown rice and sugars (oligosaccharides and palatinose) was fixed to 25, 50 and 16%, respectively. Green tea, tomato and pumpkin powder were blended individually at 9%. Specific mechanical energy (SME) input decreased as die temperature for each vegetable addition increased. All extrudates decreased in density and breaking strength, but increased in specific length and water soluble index as $CO_2$ gas injection increased. Elastic modulus decreased as the die temperature and $CO_2$ gas injection increased. Extruded green tea mix with $CO_2$ gas injection at 150 mL/min was larger pore size and higher amount of pore than the tomato and pumpkin extrudates with $CO_2$ gas injection. Cold extrusion with $CO_2$ gas injection at $60^{\circ}C$ die temperature could be applicable for making Saengsik (uncooked food).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.886-897
• /
• 2016

The physical properties of rooting media for the establishment of plugs in a greenhouse are modified according to variations in the greenhouse environment throughout the season. In this study, we established a standard for rooting media for the production of plug seedlings for each growing season (summer, winter and spring fall). Eight types of peatmoss (PM) and 4 types of perlite (PL) commonly used in Korea were collected and blended with the ratio of 7 parts PM to 3 parts PL (v/v) to make 32 different rooting media blends. We determined the total porosity (TP), container capacity (CC), air-filled porosity (AFP), pH, and electrical conductivity (EC) of the 32 media blends, and 6 media blends were selected for seasonal use. We also conducted additional analyses for plant easily available water (EAW), buffering water (BW), cation exchange capacity (CEC), and nutrient contents in the 6 media blends. The TP, CC, and AFP of the 32 media blends ranged from 64.7 to 96.0%, 42.9 to 90.1%, and 1.3 to 27.8%, respectively, indicating that the physical properties were strongly influenced by the type of PM and PL. The pH and EC of the PMs ranged from 2.96 to 3.81 and 0.08 to $0.47dS{\cdot}m^{-1}$, respectively. However, after blending the PM with the PL the pH was raised and the EC was lowered The media blends selected for the summer growing season were Blonde Golden peatmoss (BG) + No. 1 perlite size < 1 mm (PE1) and Latagro 0-10 mm (L1) + No. 2 perlite size 1-2 mm (PE2). These two media blends had 89.8-90.9% of TP, 80.8-81.3% of CC, and 9.0-9.7% of AFP. The media blends selected for the winter growing season were Sfagnumi Turvas (ST) + PE2 and Latagro 20-40 mm (L3) + PE2. These media blends had 79.9-86.7% of TP, 60.4-74.9% of CC, and 11.8-19.6% of AFP. The TP, CC, and AFP of two media blends, BG + No.3 perlite 2-5 mm (PE3) and Orange peatmoss (O) + PE3, selected for the spring and fall growing seasons, respectively, were 85.2-87.3%, 77.9%, and 7.4-9.4%, respectively. The percentage of EAW of the media blends selected for the spring, summer, and winter growing seasons ranged from 24.2-24.9%, 22.0-28.6%, and 18.0-21.8%, respectively, but the percentages of BW were not significantly different among the selected root media blends. The pH, EC, and CEC of the 6 selected media blends ranged from 3.11-3.97, $0.06-0.26dS{\cdot}m^{-1}$, and $97-119meq{\cdot}100g^{-1}$, respectively.