• Structural Engineering and Mechanics
• /
• v.51 no.5
• /
• pp.755-771
• /
• 2014

Environmental changes, especially global climate change, are creating new challenges to the development of the Arctic regions, which have substantial energy resources. And attention to offshore structures has increased with oil and gas development. The structural impact response of an explosion-resistant profiled blast walls normally changes when it operates in low temperatures. The main objectives of this study are to investigate the structural response of blast walls in low temperature and suggest useful guidelines for understanding the characteristics of the structural impact response of blast walls subjected to hydrocarbon explosions in Arctic conditions. The target temperatures were based on the average summer temperature ($-20^{\circ}C$), the average winter temperature ($-40^{\circ}C$) and the coldest temperature recorded (approximately $-68^{\circ}C$) in the Arctic. The nonlinear finite element analysis was performed to design an explosion-resistant profiled blast wall for use in Arctic conditions based on the behaviour of material properties at low temperatures established by performing a tensile test. The conclusions and implications of the findings are discussed.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.3
• /
• pp.205-214
• /
• 2008

Blast disease caused by the fungal pathogen, Magnaporthe oryzae, is one of the most damaging diseases in rice. The use of resistant varieties is an effective measure to control the disease, however, many resistant varieties were broken down to their resistance effects by the differentiating of new virulent isolates. This study was done to analyze the haplotypes of 31 microsatellite markers linked to five major R genes and two QTLs and to identify the alleles for the putatively novel genes related to durable resistance to blast in 56 Korean japonica and four indica varieties. The 31 microsatellite markers produced 2 to 13 alleles(mean = 5.4) and had PICi values ranging from 0.065 to 0.860(mean=0.563) among the 60 rice accessions. Cluster analysis based on allele diversities of 31 microsatellite markers grouped into 60 haplotypes and ten major clusters in 0.810 genetic similarity. A subcluster IV-1 grouped of early flowering varieties harboring Piz and/or Pi9(t) on chromosome 6 and Pita/Pita-2 gene on chromosome 12. The other subcluster V-1 consisted of four stable resistance varieties Donghae, Seomjin, Palgong and Milyang20. The analysis of putative QTLs associated with seven blast resistance genes using ANOVA and linear regression showed high significance to blast resistance across regions and isolates in the markers of two genes Piz and/or Pi9(t) and Pita/Pita-2. These results illustrate the utility of microsatellite markers to identify rice varieties is likely carrying the same R genes and QTLs and rice lines with potentially novel resistant gene.

• Journal of the Korean Professional Engineers Association
• /
• v.44 no.5
• /
• pp.36-41
• /
• 2011

Design of blast resistant structures (protective structures) require the adequate design and construction practices as well as the knowledge of characteristics of the blast loads, behavior of structures and their components under these loads. This paper focuses on how to design and evaluate the structures for blast resistance, and provides principles and discussion on analysis and design capability in protective technology and recommendations.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.64.2-64
• /
• 2003

Twenty-seven monogenic rice lines harboring major resistant gene for blast were screened to analyze their resistance spectrum to Korean blast fungus population using 190 isolates collected from 1985 to 2002. Especially, the monogenic line containing Pi-9 gene was screened using 320 isolates. Based on the monogenic lines-blast isolate interactions, the 27 rice lines were classified into 9 groups. The chinese rice cultivar LTH showed susceptible to all the tested isolates. Those lines IRBLz-Fu, ERBL5-M and IRBL9-W harboring Pi-z, Pi-5, and Pi-9, respectively showed broader spectrum of resistance than those rice lines having Pi-19, Pi-7 etc. Interestingly, the Pi-9 gene(IRBL9-W) showed resistance to most isolates collected before 2000, but it showed susceptible reactions to 5％ and 20％ of blast fungus population in 2001 and 2002, respectively. Population of virulent isolates to Pi-ta, Pi-b, and Pi-7 also were increased in 2002 compared to those before 2000.

• Korean Journal Plant Pathology
• /
• v.14 no.5
• /
• pp.496-501
• /
• 1998

Incidence of rice blast on new rice cultivars and elite lines was observed from 1995 to 1997 in Icheon, Chuncheon, Jecheon and Naju areas. The observation was made in the nurseries and fields. In the nurseries, three cultivars Grubyeo, Sangjuchalbyeo and Suwon 414 showed moderate levels of resistance to leaf blast, with the disease index 0 to 5. From the field observation, it was found that cultivars Heugjinjubyeo and Unbong 18 were highly resistant to leaf blast, but susceptible to neck blast. In general, there was a great variation yearly and regionally in the incidence of neck blast within the same cultivar, ranging from 0 to 100%. However, the range of neck blast infection was relatively narrower in the cultivars Yunghaebyeo (0∼2.4%) and Suwon 414 (0∼2.2%) during observation period. Races of rice blast fungus were variable at different areas. Among them dominant races were KI-409, KJ-201 and KJ-301.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.4
• /
• pp.10-16
• /
• 2012

This study presents the effectiveness of a composite structure at improving blast resistance. The proposed composite structure consists of carbon fiber reinforced polymer (CFRP) and steel layers. While CFRP layer is used for blast energy reflection due to its high strength, steel layer is used for blast energy absorption due to its high ductility. A dynamic model is used to simulate the elastoplastic behavior of the proposed composite structure subject to blast load. Considering the magnitude variations of a blast event, the probability of failure of each layer is evaluated using reliability analysis. By assigning design probability of failure of each layer in the composite structure, the thickness of layers is optimized. A case study for the design of CFRP-steel composite structure subjected to an uncertain blast event is also presented.

• Structural Engineering and Mechanics
• /
• v.39 no.2
• /
• pp.287-301
• /
• 2011

This paper is focused on the residual capacity of steel columns, as a damage criterion. Load-Impulse (P-I) diagrams are frequently used for analysis, design, or assessment of blast resistant structures. The residual load carrying capacity of a simply supported steel column was derived as a damage criterion based on a SDOF computational approach. Dimensionless P-I diagrams were generated numerically with this quantitative damage criterion. These numerical P-I diagrams were used to show that traditional constant ductility ratios adopted as damage criteria are not appropriate for either the design or damage assessment of blast resistant steel columns, and that the current approach could be a much more appropriate alternative.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.68.1-68
• /
• 2003

When plants are infected by plant pathogens, typical disease symptom termed lesion, appears in compatible interaction. Whereas, in incompatible interactions, only small speck of lesions are visible on the leaf surfaces. Hypersensitive response (HR) of plant which is the result of infection by incompatible pathogens, is a well known defense response inducing rapid cell death resulting in complete resistance. However, some rice mutants show spontaneous disease symptoms during the growth stages without interaction with pathogens. We investigated the spontaneous cell death mutant called Blast Lesion Mimic(BLM) generated by EMS mutation, on the relationship with the hypersensitive response as well as resistant characteristics. Accumulation of phenolic compounds were detected around the lesions as lesions develop on leaf surface. Activation of PR gene was detected before the lesion appeared, and that result indicates the defense-related response are started earlier than lesion formation. The BLM mutant showed resistant response to inoculation of Magnaporthe grisea KJ201 with which the wild type Hwacheong is totally susceptible. Informations on the formation of spontaneous lesions and detail analysis of lesion mimic mutants and related genes are very limited to date. It is really important to understand the phenomenon of the defense-related lesion formation for developing resistant cultivar for rice blast pathogens

• Journal of the Society of Disaster Information
• /
• v.12 no.4
• /
• pp.432-439
• /
• 2016

To make a model of a Impact/Blast resistant composite material and perform the analysis, material properties of the composite material are required. In order to obtain such a property value, it is necessary to input the result obtained by performing a lot of material tests by the calculation formula of the situation, and there is a lot of difficulty in the case of a special purpose material which is not a general material. In this study, modeling and structural analysis of composite fiber panels for protection and explosion - proofing were performed in ACP(ANSYS Composite PrePost) and AUTODYN by applying the application properties of composites provided in Ansys Workbench environment.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.136-137
• /
• 2010