• 제목/요약/키워드: Blast furnace slag concrete(BFSC)

검색결과 3건 처리시간 0.017초

양생온도가 고로슬래그 콘크리트의 강도발현에 미치는 영향분석 (Effect of curing temperature and blast furnace slag concrete on concrete strength development)

  • 이규동;전명일;이창수;김동식
    • 한국재난정보학회 논문집
    • /
    • 제2권1호
    • /
    • pp.129-137
    • /
    • 2006
  • The present work is attempt to evaluate the temperature dependence of blast furnace slag concrete(BFSC) based on the concrete strength cured with different curing temperatures and ages. A equivalent substitution index(ESI) was induced to explain temperature dependence of concrete quantitatively as well as concrete strength. The results from compressive strength showed substantial crossover effect. which is the phenomenon that the compressive strength cured at low temperature becomes stronger than the one cured at high temperature. The crossover effect found more definitely on BFSC than plain concrete.. The ESI became 1.1 and 1.0 for the BFSC cured at $20^{\circ}C$ and $30^{\circ}C$ after age of 56 days, respectively. Which means that the contribution to strength development of blast furnace slag per unit mass is stronger than that of the Portland cement. It was considered therefore that the optimum curing temperature for BFSC is $20^{\circ}C$.

  • PDF

해수를 사용한 알칼리 활성화 결합재의 미세구조 및 강도 특성 (Microstructure and Strength Properties of Alkali-activated Binder mixed with Sea Water)

  • 전유빈;오재은
    • 콘크리트학회논문집
    • /
    • 제28권3호
    • /
    • pp.299-308
    • /
    • 2016
  • 본 연구에서는 플라이애시와 고로슬래그시멘트를 혼합한 결합재에 알칼리 활성화제와 해수 및 증류수를 사용하여 제작한 경화된 시편에 대해 물리적 및 미세구조 특성을 분석하였다. 플라이애시와 고로슬래그시멘트의 결합재 혼합 중량비는 6:4, 7:3 및 8:2로 하였으며, 수산화나트륨과 규산나트륨을 결합재의 각각 5wt%로 하여 활성화제로 사용하였다. 재령 3, 7 및 28일에 대해 압축강도 및 흡수율을 측정하였으며, 재령 28일에 XRD, TGA 및 MIP 시험을 실시하였다. 배합수의 종류와 관계없이, 알칼리 활성화된 결합재는 고로슬래그시멘트 혼합비가 증가할수록 ettringite 및 C-S-H의 생성량이 많아졌으며, 또한 50 nm 보다 큰 공극들이 줄어듦에 따라 압축강도가 높아지는 결과를 보여주었다. 본 연구의 모든 배합에 대해서 공통적으로 확인된 반응생성물로는 C-S-H, $Ca(OH)_2$ 및 calcite인 것으로 나타났다. 해수를 사용한 시편들과 증류수를 사용한 시편들 내에 생성된 주요 반응생성물의 차이는 hydrocalumite인 것으로 나타났다. 각각의 결합재 혼합 중량비에 대해서 증류수 및 해수 사용에 따른 시편들의 압축강도에서는 배합수로 해수가 사용되더라도 증류수가 사용된 시편과 대체적으로 유사한 강도발현을 나타내었으며, 또한 재령에 따른 강도증진율이 증류수가 사용된 시편보다 뛰어난 경우도 확인되었다. 배합수로서의 해수 사용은 해수에 함유되어 있는 염화 이온(Cl-)이 결합되면서 생성된 hydrocalumite가 공극을 매우면서 시편 내의 총공극용적을 감소시키는 것으로 나타났다.

비소성 시멘트 경화체의 공극구조 (Pore Structure of Non-Sintered Cement Matrix)

  • 문경주;박원춘;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.329-332
    • /
    • 2004
  • This study aims to manufacture non-sintering cement(NSC) by adding phosphogypsum(PG) and waste lime(WL) to granulated blast furnace slag(GBFS) as sulfate and alkali activators. This study also investigates the pore structure of NSC Matrix. The result of experiment of pore structure properties, showed no considerable difference for total pore volume by cement mixing ratio but shows a large distinction in distribution of pore diameter. On the whole, pore-diameter of paste of NSC show that occupation ratio of pore diameter below 10mm is larger and is smaller than OPC and BFSC at pore diameter of over 10nm. Such a reason is that the hydrate like CSH gel and ettringite formed dense pore structure of NSC matrix.

  • PDF