• 제목/요약/키워드: Blast furnace dust

검색결과 42건 처리시간 0.023초

CBS-dust 치환에 따른 고로슬래그 다량치환 시멘트 벽돌 품질에 미치는 영향 (Effect of CBS-dust replacement rate on the Qualities of High Volume GGBFS Cement Bricks)

  • 한준희;한수환;김수호;윤치환;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 가을 학술논문 발표대회
    • /
    • pp.105-106
    • /
    • 2021
  • This study examines the performance of CBS-Dust for the utilization of cement bricks as alkali stimulants for furnace slag replacement binders. It converts the CBS-Dust substitution rate and the excess slag substitution rate. According to the analysis, when replacing CBS-Dust with 65~70 % of BS substitution rate and 7.5~10 % of CBS-Dust, it shows excellent performance as an alkali stimulant of BS' potential hydrophobic reaction, and it is expected to be effective for secondary products of BS replaced in large quantities.

  • PDF

환경 친화형 투수성 폴리머 콘크리트의 특성 (Properties of ECO-permeable Polymer Concrete)

  • 박필우;윤준노;성찬용
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2002년도 학술발표회 발표논문집
    • /
    • pp.149-152
    • /
    • 2002
  • This study is performed to evaluate the properties of ECO-permeable polymer concrete with blast furnace slag powder and stone dust. The unit weight is in the range of $1,821kg/m^3{\sim}1,955kg/m^3$, the unit weights of those concrete are decreased $15%{\sim}20.8%$ than that of the normal cement concrete. The highest strength is achieved by ECO-permeable polymer concrete filled blast furnace slag powder 50% and stone dust 50%, it is increased 36% by compressive strength, 119% by tensile strength and 217% by bending strength than that of the normal cement concrete, respectively. The coefficient of permeability is in the range of $5.6{\times}10^{-2}cm/s{\sim}8.1{\times}10^{-2}cm/s$, and it is largely dependent upon the mix design.

  • PDF

EAF Dust Treatment at Miike Smelting CO., LTD.

  • Noda, Shinji;Tatehana, Yoshikazu
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.375-380
    • /
    • 2001
  • MF is a half shaft blast furnace which has been developed at Mitsui Miike Smelter in the 1960’s to treat vertical retort residue. The MF has also been tested for treatment of various recycling materials and wastes. Now various secondaries and wastes (EAF dust, zinc leaching residue, Cu sludge, etc ) are mainly treated. Powder materials are briquetted with reductant before being fed to the furnace. Products are crude zinc oxide, matte, non-hazardous slag and steam. Zinc and lead are recovered in oxide dust, and copper and silver are recovered in matte. The MF can be widely applied to many kinds of materials which contain such non-ferrous metal-valuables. In addition, the improvement in operation and technology has effectively made the unit capacity much larger. The MF now has many advantages for these treatment processes.

  • PDF

고로 급냉슬래그를 첨가한 비소성 펠릿의 강도거동 (Influence of Blast Furnace Slag Addition on the Strength of Cold Bonded Pellet)

  • 피용진;반봉찬;김태동
    • 자원리싸이클링
    • /
    • 제8권1호
    • /
    • pp.29-36
    • /
    • 1999
  • 비소성 펠릿법은 종래의 소성 펠릿법의 대체 공정으로, 함철더스트류를 고로에서 재활용하기 위한 괴상화공정이다. 비소성 펠릿의 결합제로 사용되는 시멘트를 저가의 소재로 대체함으로서 펠릿의 제조원가절감을 목적으로 하였다. 본 논문에서는 결합제로서 고로 슬래그를이 용한 비소성 펠릿의 강도변화를 고찰하였다. 비소성 펠릿의 결합제인 고로 슬래그를사용함에 따라 종래의 시멘트 첨가량의 약 절반으로서 강도는 150kgf에 도달하는 것을 확인하였으며, 그에 따른 결합제들의 물리화학적인 특성에 대하여도 조사하였다.

  • PDF

벤토나이트를 활용한 고로슬래그 기반 미세먼지 흡착형 경화체의 특성 (Properties of Fine Dust Adsorption Matrix Based Blast Furnace Slag using Bentonite)

  • 김연호;경인수;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 춘계 학술논문 발표대회
    • /
    • pp.40-41
    • /
    • 2019
  • Fine dust, which is emerging as a global problem, attracted much attention recently in Korea. One of the reasons is that recent factory relocation and expansion in China affected the increase of domestic fine dust concentration due to the influence of the Yangtze river battalion and westerlies. Fine dust is a big problem not only in outdoor but also indoors. The room requires periodic ventilation and is also essential for improving indoor air quality. The fine dusts are designated as Group 1 carcinogens in WHO and the risk of fine dusts on the human body due to respiratory diseases is also increasing. In this study, the characteristics of the fine dust adsorption matrix are examined and the actual application direction is derived.

  • PDF

CBS Dust를 시멘트 대체재로 활용하는 모르타르의 경화 특성 (Properties of Hardened Mortar Using Chlorine By-pass System Dust a Cement Substitution of Cement)

  • 이영준;이혁주;현승용;김민상;이동주;한민철
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 추계 학술논문 발표대회
    • /
    • pp.167-168
    • /
    • 2018
  • In this study, use to CBS Dust as substitution of cement was explored. And the CBS Dust was intended to be used as a cement substitute, and the possibility as a potential water hardness stimulant for BS was investigated. Test results indicated that it can be used in with BS for a potential hydroponic stimulant.

  • PDF

Recent Improvements in Integrated Zinc Control and Dust/Sludge Recycling at China Steel

  • Liu, Kuo-chung;Chiang, Shyh-yi
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.437-442
    • /
    • 2001
  • In an integrated steel mill, zinc (Zn) inputs from raw materials and steel scrap are enriched in the dusts and sludges collected from gas and water cleaning systems. The reuse of these dusts and sludges must be controlled within certain limit to avoid Zn accumulation and related operational problems in blast furnace. An integrated system has been established at China Steel Corporation (CSC) to enhance the internal reuse of Zn-containing dust/sludge while keeping Zn input within control lim it. However. the performance of this system has not been very satisfactory until one and half years ago when a rationalization process was initiated. The essence of this rationalization process, the recent improvements in Zn control and dust and sludge reuse are reported and discussed.

  • PDF

함철 더스트를 원료로 한 고로용 비소성 펠릿의 강도 및 환원거동 (Strength and Reduction Behaviour of Cold-bonded Pellet for Blast Furnace Burden using Iron-bearing Dust)

  • 김태동;백찬영;조종민
    • 자원리싸이클링
    • /
    • 제4권1호
    • /
    • pp.60-68
    • /
    • 1995
  • 철강공정에서 발생하는 함철더스트에 시멘트를 첨가한 비소성 더스트 펠릿을 제조하여 고로용으로서의 특성을 평가하였다. 시멘트를 10wt.% 첨가한 펠릿은 적절한 양생조건하에서 150kg/p 이상의 압축강도에 도달하였다. 더스트 펠릿은 특히 $900^{\circ}C$에서의 환원성이 우수하였는데, 이는 비소성 펠릿 중에 함유된 탄소의 직접환원 반응과 고온에서 증가된 기공 때문이다. 이외에 비소성 펠릿의 회전강도, 환원분화성 및 환원 팽창성도 철광석 소결광 및 소성 펠릿에 비교하여 우수하거나 대등한 성상을 나타내는 것을 확인하였다.

  • PDF

혼화재 종류가 콘크리트의 공학적 특성 및 건조수축에 미치는 영향 (Effect of Mineral Admixture Types on the Engineering Properties and the Drying Shrinkage of the Concrete)

  • 한민철
    • 한국건축시공학회지
    • /
    • 제9권5호
    • /
    • pp.119-125
    • /
    • 2009
  • 본 연구에서는 실무에서 주로 사용되고 있는 FA, 35 및 CKD 치환률에 따른 콘크리트의 기초적 물성 및 건조수축에 미치는 영향을 분석하고 이를 토대로 건조수축 해석을 실시하여 혼화재가 콘크리트의 건조수축에 미치는 영향을 정량적으로 평가하고자 한다. 실험변수로서 혼화재 치환률은 $0{\sim}20%$ 수준으로 결정하였고, W/B는 $40{\sim}50%$의 수준으로 결정하였다. 건조수축해석을 위해 지수함수모델을 적용하였다. 연구결과에 따르면, 혼화재 치환율이 증가함에 따라 유동성 및 공기량이 감소하였으며 초기압축 강도가 저하됨을 확인 하였다. 건조수축 특성으로 혼화재 치환률이 증가함에 따라 건조수축은 증가하는 경향을 보였으며, 건조수축 해석결과 지수함수 모델이 측정치를 양호하게 추정함을 알 수 있었고, 혼화재의 영향을 고려할 필요성이 제기되었다.