• Design & Manufacturing
• /
• 제2권3호
• /
• pp.32-39
• /
• 2008

after using dom die, this sheet pressed from a variation condition of size, of die holder power,of rpm speed, accordingly the kind of material, the conditionof deformation movement between both sheets is analyzed, is investigated in the Press machine. even if the change quantity which formed raises a blank holder pressure, the change quantity which is special is not visible from the segment where there is not a bead, the segment where there is a bead to the other side does change quantity schedule to initially and the features of press holding power which the change quantity diminishes is showed consequently from pressurization change quantity it is visible but until a rupture territory from the rpm, it goes but the features where the change quantity does not change a lot is observationd, from the CR2-sheet the quality comes out though well but a possibility of getting a result under same conditions of AL-sheet does not become the formation which stands is. It is like that though press-die which uses the drawing-sheet it exchanges the sheets, when AL-sheet with doing, the conclusion for maintain which have a formation sincerity healthy characteristic is same with afterwords.

• 소성∙가공
• /
• 제22권2호
• /
• pp.86-92
• /
• 2013

When stamping ultra-high-strength steel (UHSS), the phenomenon of galling, which corresponds to a transfer of material from the sheet to the tool surface, occurs because of the high contact pressure between tool and workpiece. Galling leads to increased friction, unstable interface conditions, scratches on the sheet and the tool surfaces and, eventually, premature tool surface failures. Therefore, a simple and accurate evaluation method for tool scratching is necessary for the selection of tool material and coating, as well as for a better optimization of process conditions such as blank holder force and die radius. In this study, the pin-on-disc (PODT) and pin-on-flat surface (POFST) tests are conducted to quantitatively evaluate scratch-related tool life for stamping of UHSS. The variation of the friction coefficient is used as an indicator of scratch resulted from galling. The U-channel ironing test (UCIT) is performed in order to validate the results of the friction tests. This study shows that the POFST test provides a good quantitative estimation of tool life based on the occurrence of scratch.

• 대한기계학회논문집A
• /
• 제40권10호
• /
• pp.879-886
• /
• 2016

CNG 압력용기 제조를 위한 딥드로잉 공정에 사용되는 트랙트릭스 다이는 블랭크 홀더 없이 성형을 가능하게 한다. 기존의 연구에서는 D.D.I. 공정의 1차 딥드로잉 공정에 트랙트릭스 곡선을 다이에 적용하였을 뿐, 다이의 수명향상 및 제조원가 절감을 위한 형상 최적화에 관한 연구는 전무한 실정이다. 이에 본 논문에서는 트랙트릭스 곡선의 점근선 이동을 통하여 다이의 높이에 따른 딥드로잉 공정의 유한요소해석을 수행하였다. 또한 펀치의 성형하중에 따른 다이 응력집중부의 Von-Mises 응력을 분석하여 최적의 트랙트릭스 다이 형상을 제시하였다.