• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.3
• /
• pp.79-90
• /
• 2020

This study traces the flow of modern museum architecture from the 18th to 19th century when the rationalist architectural spirit influenced the museum architecture to the 1930s, before the museums of the modern architectural masters appeared. With early modern museums until the 1930s as a target, which had long been enshrined in classicality, finally contributed to narrowing the gap with the times, but did not receive the right evaluation, this study examines their different architectural styles from previous museums and reveals that they have a significance to announce the departure of modern museums beyond classical ones. The three museums, built in the 1930s, will be identified as respectable early modern museums that will fill the remaining blank space of the history of museum architecture. In this study, modern museums are asymmetric, non-centre oriented, and non decorative. They have multi-directional circulation, and a neutral, open and flexible exhibition space. They also try to align themselves with the modern architectural tendency of the day.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.405-408
• /
• 2004

The sheet parts are formed with dies conventionally. But this conventional forming process is not suited to small volume and varied production for the reason of high cost. For the solution of this problem, a new forming process, which is called CNC incremental sheet forming, is being introduced. This process can form sheet parts without die, and is very well suited to small volume and varied production in space flight and automobile. In this paper, dieless CNC forming system based on a machining center is developed. A special device to grasp and pull the blank sheet built in the machining center and tool path generation S/W from STL file of 3-D model are developed. Several sheet parts are incrementally formed to verify the effectiveness of the developed system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.184-187
• /
• 2004

The sheet parts are formed with dies conventionally. But this conventional forming process is not suited to small volume and varied production for the reason of high cost. For the solution of this problem, a new forming process, which is called CNC incremental sheet forming, is being introduced. This process can form sheet parts without die, and is very well suited to small volume and varied production in space flight and automobile. In this paper, dieless CNC forming system based on a machining center is developed. A special device to grasp and pull the blank sheet built in the machining center and tool path generation S/W from STL file of 3-D model are developed. Several sheet parts are incrementally formed to verify the effectiveness of the developed system.

• Journal for History of Mathematics
• /
• v.20 no.2
• /
• pp.19-32
• /
• 2007

This Paper aims to introduce Euler's life, works and thoughts, to show that it is his Christian worldview that enables his achievements. His life teaches us the lesson that examining philosophical base and historical background is crucial to understand mathematics or mathematicians, and that it is necessary to overcome given conditions and environments rather than expect better environments to reach meaningful achievements.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.47
• /
• pp.181-191
• /
• 1998

Bevel gears are suitable for transmitting power between shafts at practically any angle or speed. However, the particular type of gear best suited for a specific application is depends upon the mountings, available space, and operating conditions. Therefore it is important in any general design imploying gears to first make a study of all the conditions under which the gear must operate. Presented in this paper is a S/W calculating design parameters automatically for bevel gears. This S/W provides the Standards for the design of straight bevel, zerol bevel, spiral bevel and hypoid gears. Topics include preliminary design parameters, blank design including standard taper, uniform depth, duplex taper and tilted root so that Gleason, Klingelnberg and Oerlikon machine tools are covered.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.04b
• /
• pp.7-7
• /
• 2002

Recently social demand to achieve low fuel consumption and clean emission requires the development of new generation vehicle beyond the conventional vehicle concept. In this point, new generation vehicle is newly designed as electric vehicle, hybrid electric vehicle, fuel cell electric vehicle or 3 liter car etc. In order to develop new generation vehicle, it is very important to develop new materials and process technologies now. In this paper these new technologies are presented focusing on weight reduction specially. Steel body can be achieved 20-25% weight reduction by adoption of high strength steel and new process technologies, i.e tailored blank and hydroforming. Aluminium body can be achieved 40-50% weigt down by use of all aluminium monocoque body or aluminium space frame with aluminium panel. Plasitic composite body can be achieved 30% weight reduction comparing with conventional steel body.

• Structural Engineering and Mechanics
• /
• v.6 no.2
• /
• pp.217-227
• /
• 1998

An elasto-plastic finite element procedure using degenerated shell element with assumed strain field technique considering both material and geometric nonlinearities has been developed. This assumes von-Mises yield criterion, von-Karman strain displacement relations and isotropic hardening. A few numerical examples are presented to demonstrate the correctness and applicability of the method to different kinds of engineering problems. From present study, it is seen that there is a considerable improvement in the displacement valuse when both material and geometric nonlinearities are considered. An example of the spread of plastic zones for isotropic and anisotropic materials has been illustrated.

• Korean Journal of Plant Resources
• /
• v.24 no.6
• /
• pp.729-732
• /
• 2011

This experiment was conducted to clarify the antitussive effect of Fritillaria unibracteata Hsiao et K. C. Hsia. The antitussive effect in ethanol (75, 50, 30%) extracts from F. unibracteata was relatively high. The ethanol extracts of 20, 40 mg/kg concentrations were especially good antitussive effect. The ethanol extracts of F. unibracteata showed lower antitussive activities of 20~30% than sodium chloride injection used as a blank space control.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.2
• /
• pp.125-135
• /
• 2010

To discover the main characteristics of Korean traditional flower arrangement, they were compared with different articles and old paintings used in royal court ceremonies. The primary research involved principle of design. The times periods used were the Joseon Dynasty era of Korea, the Ming era of China, and the Edo eras of Japan. The result, which shows both the similarities and differences, of the research is summarized as follows. The similarities were that they all respect the features of nature, and their image expresses their creator's thinking. There was one technique, called 'Suje', in which a part of the stem is coming out from one branch. Also, each three eras preferred flowering trees and ornamental trees more than annuals or foliage plants. one of the differences was that korea used a simple number of materials. The work had volume and appeared mild by using a soft curved line which was repetitive and massive. The Joseon Dynasty era advanced a sense of beauty with artistic symmetry and balance. The work seemed soft and natural because of the little change in blank space, with almost no angle of line. The form had a characteristic preference of being taller than the typical Japanese arrangement. It appeared simple, calm, and rustic by using only one kind of material. In contrast, the Chinese style was gorgeous and displayed volume in a non-symmetrical tripodal form, which incorporated various colors and materials. Also, they avoided processing the materials in order to emphasize the original beauty of nature. Chinese flower arts did not become formalized because they did not consider the formality seriously the formal. The Japanese style was also gorgeous because it incorporated various materials and angles. It included an extreme technique in which an artificial line divided the blank space delicately. The line was both strong and delicate in an established form. The restriction of the main branch gave a light feeling, as well as more strain as in a balance sense. The Japanese eras emphasized more the use of line and a sense of blank space.

• Journal of the Korean earth science society
• /
• v.30 no.1
• /
• pp.141-151
• /
• 2009

Inquiry has been emphasized in science classrooms, but the problems shown in the inquiry are somewhat different with ones that students usually meet and experience in everyday life. The purpose of this study is to investigate how attitudes toward the task and thinking skills affect students' problem solving process, especially, the way of creating a problem space and elaborating problem solving strategies when they have little schema. The difference in students' problem solving strategies of Lego Robotics class, one of the summer programs for $4^{th}-6^{th}$ grade gifted students, which is new to them, was investigated. The results are as follows: (1) The difference in attitudes toward the task, or selection and identification of the missions, and the perception of operators, affected creating a different problem space. (2) Different level of thinking skills, or analytical and flexible thinking, efficient elaborative skill, and application of schema affected a different level of elaboration of the problem space and resulted in asuccess rate of problem solving. (3) Different initial problem space resulted in different problem solving strategies. But without thinking skills, students could not elaborate problem solving strategies efficiently. Several instructional recommendations to promote scientific inquiry were suggested based on the results.