• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.123-128
• /
• 2000

Fundamental and informative data of axi-symmetric stretch-drawing of several sheetmetals with thicknesses of 0.7-1.0mm are presented both for single and double operations. Very small radius is applied to the die profile (or-shoulder) ion all operations. to induce wall-thinning by the effect of bending-under-tension from which the name 'stretch-drawing' comes. It is clearly demonstrated that deeper cups could be formed by single and double stretch-drawings from smaller circular blanks due to such wall-thinning action than in the usual deep-drawing of larger blanks, From this fact it is emphasized that the deep-drawability of a sheet metal is not evaluated simply by the conventional L.D.R (limiting drawing ratio) but the depth of the drawn cup should also be taken into account./ Many experimental data about various metals and thicknesses given in this paper offer a valuable information in this process for more general use which recommends to replace the conventional deep-drawing process by the stretch-drawing process both for single and double operations. In the single stretch-drawing it is also confirmed that a deeper cup can be produced by raising the blank-holding force at later stage of operation.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.276-282
• /
• 2009

Wrinkling in the flange and wall of a deep-drawn part is one of the major defects in sheet metal processes. Wrinkling is influenced by many factors, such as material properties, shape of the body, forming conditions, stress state and thickness, etc. It is difficult to analyze the wrinkling initiation and growth according to the factors because the effects of the factors are very complex and the wrinkling behavior may show wide variation even though small deviation of factors. In this study, the influence of wrinkling parameters, such as material properties (Al1050, Al5052), the blank holding force and the drawing depth on the wrinkling initiation and growth is investigated by using the experimental method and the dynamic explicit finite element analysis. From the results, it is shown that the dynamic explicit finite element method can be used effectively to prevent the wrinkling problems advancely in the deep drawing process. Also, there is a good agreement between the experimental result and the dynamic explicit finite element analysis.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.177-185
• /
• 2001

This study shows the process design and forming analysis of permalloy shielding can that support the automobile multi-display parts to indicate the accurate information of car. This study is particularly important, since the strain and thickness of permalloy shielding can is known to affect the magnetic properties such as coercivity and permeability quite thickness of permalloy shielding can is known to affect the magnetic properties such as coercivity and permeability quite sensitively. The objective functions are strain and thickness deviation. The punch radius, die radius and blank holding force are considered as design parameters. Orthogonal array (OA) table and characteristics are applied to neural network (NN) as train data. After training, the optimal and robust condition of design parameters is selected. This study shows the correlation between the design methodology of NN and the statistical design of experiments (DOE) approach.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.86-91
• /
• 2005

The stack, the core unit of the MCFC system, is composed of the three main parts which are the electrodes, the matrix keeping the electrolyte and the separator. Among these, the separator made of low carbon steel is manufactured by some sheet metal forming processes. The flatness of flange of the mask plate of the separator is crucial not only to enhance the stack performance but also to reduce the production cost. This study has focused on the enhancement of flatness of the mask plate flange by controlling some process parameters like the punch and die comer radii, the blank holding force, the friction coefficient and so on. The springback phenomenon occurring in the flange drawing process has been studied first using the finite element method (FEM) in order to understand what causes the springback. The distribution pattern of local longitudinal stress in the flanged part has been revealed very important in predicting the final shape of the flange. This fact has been backed up by the experimental results carried out with the developed test dies.

• 한국가스학회지
• /
• 제20권4호
• /
• pp.78-84
• /
• 2016

대용량 알루미늄 라이너의 제작을 위해 역 드로잉 공정을 적용하였고, 최적의 역 드로잉 공정 설계에 대한 연구를 수행하였다. $350^{\circ}C$의 어닐링된 Al6061의 인장시험 및 해석을 수행하여 라이너 성형 해석을 위한 대변형률에서의 유동응력 및 연성파괴지수를 구하였다. 역드로잉 공정의 유한요소해석을 수행하여 금형의 형상, 블랭크 홀딩력, 드로잉비, 금형간의 간격, 부분가열영향에 대해 분석하였다. 유한요소해석을 통해 주름 및 파단을 방지하는 최적의 조건을 도출하여 시제품을 제작하였으나, 드로잉된 컵의 끝부분에서 부분적인 파단이 발생하였다. 하지만 후속공정을 적용하기 위한 충분한 길이가 확보되어 플로우 포밍, 스피닝 공정을 적용하여 최종제품을 제작하였다.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.483-490
• /
• 2016

자동차 도어 래치는 스프링, 사출품, 소형 모터 등의 작은 부품들을 조립하여 제조된다. 이를 위해서는 각 부품의 정밀설계 및 조립기술이 요구된다. 도어 래치는 자동차의 문을 열리지 않게 고정시켜 운전자의 안전에 직접적인 영향을 미치는 중요한 역할을 한다. 따라서 본 연구에서는 자동차 도어 래치의 주요 구성요소인 커넥터 단자의 트리밍 시, 롤오버를 저감하고 적합한 유효전단면을 찾기 위한 연구를 수행하였다. 유한요소해석과 실험계획법의 직교배열을 통한 다구찌법을 이용하여 차량용 도어 래치커넥터 단자의 전단면 품질 향상을 위한 최적 설계변수를 설정하였다. 해석에 사용된 설계변수는 클리어런스, 곡률반경, 블랭크 홀딩력이며, 커넥터 단자의 재질은 C2600이다. 해석을 통해 제안된 최적 트리밍 공정 조건은 실험을 통해 검증되었으며, 최종제품의 전단면 형상과 치수가 성형해석 결과와 잘 일치하였다. 이상의 결과로부터 차량용 도어 래치커넥터 단자의 최종 롤오버 및 유효전단면 향상을 위한 최적화에 다구찌법을 유용하게 적용할 수 있음을 알 수 있으며, 트리밍 공정 이외의 다양한 금속성형공정에도 유용하게 적용할 수 있을 것으로 사료된다.