• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.4
• /
• pp.221-228
• /
• 2019

Experimental investigation was performed to analyze the flow field characteristics and power generation performance for a shroud tidal power generation system. Electrical power output was compared with the rotational speed of the turbine blade and electric load connected to the generator for various flow velocity. As the electrical load decreased, the speed of the turbine increased rapidly and reached by about 2 times. The power output also increased remarkably with the decrease of load, and then decreased after maximum power point. In addition, the maximum power point appeared at high electrical loads as the experimental flow velocity increased. These results of the flow field characteristics and power generation performance analysis of the shroud tidal power generation system variation with the flow velocity conditions and electrical load are expected to be the basic data necessary for the development of efficient shroud tidal power generation system.

• Journal of Aerospace System Engineering
• /
• v.12 no.6
• /
• pp.23-31
• /
• 2018

In the present work, the thrust and torque of multicopter propellers in hovering are predicted based on BET method. The geometry information of the propellers is obtained using a three dimensional scanner and the airfoil section is extracted using CATIA. EDISON CFD is adopted to calculate the drag and lift of airfoil at a given geometry and flow conditions and then thrust is calculated with respect to a given RPMs based on BET. Two simulations with laminar and turbulent flows are considered. The predicted value is compared with the performance data from the Product Company and results from JavaProp software, which is used in the design and prediction of propellers. In the case of a 9-inch propeller, the thrust from the product company is corresponding to the results between the laminar and turbulent flow conditions. In the 16-inch case, the predicted thrust at turbulent flow conditions conformed well with reference one. The predicted torque shows a big difference with the reference data.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.94-99
• /
• 2021

It was found that mixing patterns suddenly changed at an impeller rotation speed in a dished bottom vessel with dual Rushton turbines. Two isolated mixing regions like doughnuts rings generated at a low rotational speed and three isolated mixing regions generated at a higher speed. This phenomenon was observed at the mixing condition in transition area, where the power number with baffle was the same as that without baffle. We found a phenomenon in which the flow state in a dish-bottom agitation tank equipped with a two-stage Rushton turbine blade changes at a certain rotational speed. In the laminar flow region, the isolated stable donut rings were formed even when the rotational speed was changed, and no specific variation in the mixing pattern was observed. In the transition region, the two isolated thick unmixed donut rings do not change even if the rotation speed is changed in the flat bottom vessel, whereas in the dished bottom vessel, when the rotation speed is 450 rpm, the two isolated thick unmixed donut rings are changed to three isolated thin donut rings and then improved mixing. In the dished bottom vessel, in the range of Re=138~178, the isolated ring-shaped unmixed region appeared in three places and the size was also large. But in the flat bottom vessel, the isolated thick ring-shaped unmixed region appeared in two places in Re=116~176 and the size was also small. It appeared in two places, and the size was also small. The condition in which this phenomenon is observed is a transition region, and it was found that when the baffle plate is attached, the power number starts to increase compared to when the baffle plate is not present. In addition, when the mixing Reynolds number exceeded 300 and a slight turbulence was mixed in the flow state, the disconnection of these flow pattern was resolved and the mixture was completely mixed.

• Journal of Animal Science and Technology
• /
• v.66 no.4
• /
• pp.834-845
• /
• 2024

Currently, in pork auctions in Korea, only carcass weight and backfat thickness provide information on meat quantity, while the production volume of primal cuts and fat contents remains largely unknown. This study aims to predict the production of primal cuts in pigs and investigate how these carcass traits affect pricing. Using the VCS2000, the production of shoulder blade, loin, belly, shoulder picnic, and ham was measured for gilts (17,257 pigs) and barrows (16,365 pigs) of LYD (Landrace × Yorkshire × Duroc) pigs. Single and multiple regression analysis were conducted to analyze the relationship between the primal cuts and carcass weight. The study also examined the correlation between each primal cut, backfat thickness (1st thoracic vertebra backfat thickness, grading backfat thickness, and Multi-brached muscle middle backfat thickness), pork belly fat percentage, total fat yield, and auction price. A multiple regression analysis was conducted between the carcass traits that showed a high correlation and the auction price. After conducting a single regression analysis on the primal cuts of gilt and barrow, all coefficients of determination (R²) were 0.77 or higher. In the multiple regression analysis, the R² value was 0.98 or higher. The correlation coefficient between the carcass weights and the auction price exceeded 0.70, while the correlation coefficients between the primal cuts and the auction prices were above 0.65. In terms of fat content, the backfat thickness of gilt exhibited a correlation coefficient of 0.70, and all other items had a correlation coefficient of 0.47 or higher. The correlation coefficients between the Forequarter, Middle, and Hindquarter and the auction price were 0.62 or higher. The R² values of the multiple regression analysis between carcass traits and auction price were 0.5 or higher for gilts and 0.4 or higher for barrows. The regression equations between carcass weight and primal cuts derived in this study exhibited high determination coefficients, suggesting that they could serve as reliable means to predict primal cut production from pig carcasses. Elucidating the correlation between primal cuts, fat contents and auction prices can provide economic indicators for pork and assist in guiding the direction of pig farming.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.362-366
• /
• 2012

To explore on the defense strategies against hervivory of five Viburnum species, morphological characteristics of the leaf, leaf domatia structure and the number, herbivores insects and mites on the leaves, collected from the trees growing in Wonju-si, Pyeungchang-gun, Taebaek-si, Taean-gun, Bonghwa-gun, Sancheung-gun and Jinju-si were investigated from May 2009 to October 2011. Domatia of V. carlesii reveals pocket type, these of V. burejaeticum, V. dilatatum and V. wrightii reveal tuft type, and that of V. odoratissimum var. awabuki reveals pouch type. Domatia number per leaf proves the highest figures, 24.0/leaf for V. burejaeticum, and the lowest, 4.9/leaf for V. carlesii. Leaf surface trichomes of four Viburnum species except for V. odoratissimum var. awabuki are mainly stellate and hispid on the leaf-blade and veins, and dense stellate trichomes on the upper leaf surface of V. carlesii, V. burejaeticum, and V. dilatatum are observed till late growing season. Extrafloral nectaries(EFN) on the terminal veins of five Viburnum species are observed. Pellucid dots on the lower leaf surface of V. dilatatum and V. wrightii might be a good defense strategies against herbivores. We observe many predatory mites eating nectar on large pellucid dots of V. dilatatum. Predatory mites number per leaf proved highly significant differences among tree species, and mean of mites number was highest values 8.1/leaf for V. burejaeticum, and the lowest 2.6/leaf for V. odoratissimum var. awabuki. These results indicate that temperate broadleave trees develop various defense strategies against herbivores for survival. The more studies on the defense strategies against herbivores of tree species might be needed for sustainable forest ecosystem.

• Korean Journal of Plant Taxonomy
• /
• v.31 no.4
• /
• pp.321-341
• /
• 2001

Phytoliths of leaf blades of Oryza were studied by light and scanning electron microscopy in order to assign the diagnostic character and taxonomic key for the genus. Some phytoliths such as stomatal apparatus, long-cell and short-cell, existing at the same position on the abaxial side of leaf blade, were intensively investigated because of their various forms documented in a previous study. These characters have value either for testing infrageneric classification or for identifying taxa within the genus. Stomatal phytolith is formed by integration of several kinds of sources, such as the guard and subsidiary cell and the papillae. The stomatal phytolith, characterized by not only the absence and presence of phytolith originated by the papillae developed on the guard and subsidiary cell but also their pattern of arrangement, shows various morphologies, and these features have congruent with the infrageneric classification such as section and/or series. Long-cell phytolith is characterized by the absence/presence, arrangement and morphology of phytoliths originated by the papillae on the cell surface. These features may hardly have any systematic relevance within the genus, but contain some informations for identifying of species. All of short-cell phytoliths found are silica body. They form various shapes like cross, bilobate, saddlelike and trilobate, and these features are consistent with infrageneric classification such as section and/or series. Also, some characters, the absence/presence of band of short cell phytolith within costal strip, the absence/presence of saddlelike phytolith within intercostal strip and the number of band of short cell phytolith within costal strip are various according to taxa, but these features do not fall into infrageneric classification. Some taxonomic keys on the phytoliths of stomatal, long-cell and short-cell were developed by their features, and the agreement between these characters and infrageneric classifications was also discussed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.99-104
• /
• 1985

To evaluate the effect of organic matter on phytotoxicity and uptake of Cd by rice plant, paddy rice was cultivated by pot test under the flooded condition by treating a sing concentration of 25ppm Cd and different amounts of leaf mold. The phytotoxicity of rice plant by Cd and the content of Cd in the vegetative rice plant reduced by increasing the content of organic matter. The content of Cd in the vegetative parts of rice plant decreased in the order of sheath, stem, leaf blade, and brown rice. The content of Cd in brown rice was 0.59 ppm below 1 ppm, a criterion level of contaminated rice, when paddy rice was cultivated under the condition flooded condition through the whole period of cultivation. And that of Cd in brown rice could be controlled until 0.14ppm such as the similar level producing at non-contaminated paddy soil when applied 200g of lead mold/8kg of dried soil and 25ppm of Cd to the flooded paddy soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.2
• /
• pp.187-202
• /
• 1976

Experiment were conducted to study the photosynthetic ability of several rice varieties and the influence of the drymatter production on the yield components of the rice plant, especially in ripening period. The photosynthetic ability at the ripening period, the varieties were classified into two groups as relatively high capacity and low capacity. With the earlier the transplanting date and the higher the N-content leaf blade, the greater the ratio of reserved assimilates befere heading time to the ear. This could be support the fact that the rate of full-ripened grains or grain yield of 'Tongil' variety may increased by the change of environment condition.condition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.13
• /
• pp.69-72
• /
• 1973

To find the varietal differences of the protein accumulation in rice kernel. three rice varieties were planted under the conditions of different planting dates and different nitrogen levels. Samples of leaf blade, culm and rice grain were obtained at 10 day intervals during grain development period, and analyzed by the kjeldahl method for nitrogen content. The results are summarized as follows; 1. The nitrogen contents in leaf and culm were decreased as the grain development progresses. Varietal differences were found in the change of the nitrogen contents in leaf and culm. IR lines, high protein lines, reduced rapidly as the grain development progresses, but Jinheung, a leading variety in central region of Korea, showed slow decline. 2. Heavy nitrogen fertilizer application increased the nitrogen contents in the leaf and culm. Varietal differences were also found. IR lines showed higher increase than the Jinheung. 3. The protein content in brown rice were decreased as the ripening progresses to the maturity. Varietal differences were noticed in the declining trend of the protein content in brown rice. IR lines showed less changes than Jinheung and finally Jinheung showed low protein content than IR lines at maturity stage. 4. Increased nitrogen fortilizer application raised strikingly the protein content of brown rice in the IR lines but much less in the Jinheung.

• Journal of Aquaculture
• /
• v.18 no.4
• /
• pp.299-304
• /
• 2005

Laboratory culture of the native kelp Kjelimaniella crassifolia and the introduced species Laminaria japonica in east coast of Korea were compared at each stage of their life cycles. In the zoospore stage, L. japonica grows optimally at a water temperature of $15{\~}20^{\circ}C$ achieving $95\%$ spore release in 24 hours, whereas K. crassifolia requires 48 hours to achieve $90\%$ spore release in these conditions. Good growth of gametophytes occurred at $10^{\circ}C$ and $15^{\circ}C$ in both species. L. japonica grows optimally under high light intensity ($80{\~}120{\mu}mol{\cdot}m^{-2}s^{-1}$) while K. crassifolia grows best under low light intensity ($40{\~}60{\mu}mol{\cdot}m^{-2}s^{-1}$). Growth of juvenile sporophytes of L. japonica was good in various water temperatures ($10{\~}20^{\circ}C$) and light levels ($40{\~}120{\mu}mol{\cdot}m^{-2}s^{-1}$) while K. crassifolia grew to optimal blade length only under specific conditions ($10{\~}40{\mu}mol{\cdot}m^{-2}s^{-1}$). While the optimal culture conditions for K. crassifolia were more constrained than those of L. japonica which tolerated a wide range of water temperatures and light intensities, the laboratory culture conditions for both of these species reflect the natural environment in which these species are found.