• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.2
• /
• pp.185-191
• /
• 1981

The purpose of this paper is to define and describe a series of growth stages for maize. cv. MTC-l (early) and Suweon No. 19 (late) that are easily identifiable by both professional agronomists and farmers. Plants were grown at a density of 60cm row with plant spacing of 15cm at six different seeding times in 1980. Leaf development indices with ten grades (LDI) were identified and defined in accordance with the development of a leaf blade. Leaf appearance rate (LAR) was ca. 3 days and it was not influenced by the variety or seeding time. The elongation of the first internode above the ground level began in a month after emergence and it corresponded to the 8th or 9th leaf stage. Internodes elongated in regular sequence of node position. The morphological change of silks related closely with the development of kernel. The duration of generative development was not influenced by varieties and seeding time but that of vegetative growth was influenced. A new scheme for the maize which was made by the developed leaves, visible nodes above ground level, morphological change of silks and development of kernel was proposed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.29-38
• /
• 2015

In this study, 3-dimensional URANS simulation was performed to analyze the effect of the nozzle-rotor axial gap spacing of a supersonic impulse turbine on turbine performance. The computations were conducted for four different axial gap cases corresponding to about 6%, 10%, 20% and 30% of the blade height, respectively. The results show a good agreement with previous studies and the turbine efficiency decreases drastically in certain range. It is examined that the turbine performance characteristics could change depending on the influence of leading edge shock to the nozzle outlet. It is also found that the entropy rise distributions along the span differ from each other.

• Ocean Systems Engineering
• /
• v.1 no.4
• /
• pp.285-296
• /
• 2011

Spar platforms have several advantages for deploying wind turbines in offshore for depth beyond 120 m. The merit of spar platform is large range of topside payloads, favourable motions compared to other floating structures and minimum hull/deck interface. The main objective of this paper is to present the response analysis of the slack moored spar platform supporting 5MW wind turbine with bottom keel plates in regular and random waves, studied experimentally and numerically. A 1:100 scale model of the spar with sparD, sparCD and sparSD configuration was studied in the wave basin ($30{\times}30{\times}3m$) in Ocean engineering department in IIT Madras. In present study the effect of wind loading, blade dynamics and control, and tower elasticity are not considered. This paper presents the details of the studies carried out on a 16 m diameter and 100 m long spar buoy supporting a 90 m tall 5 MW wind turbine with 3600 kN weight of Nacelle and Rotor and 3500 kN weight of tower. The weight of the ballast and the draft of the spar are adjusted in such a way to keep the centre of gravity below the centre of buoyancy. The mooring lines are divided into four groups, each of which has four lines. The studies were carried out in regular and random waves. The operational significant wave height of 2.5 m and 10 s wave period and survival significant wave height of 6 m and 18 s wave period in 300 m water depth are considered. The wind speed corresponding to the operational wave height is about 22 knots and this wind speed is considered to be operating wind speed for turbines. The heave and surge accelerations at the top of spar platform were measured and are used for calculating the response. The geometric modeling of spar was carried out using Multisurf and this was directly exported to WAMIT for subsequent hydrodynamic and mooring system analysis. The numerical results were compared with experimental results and the comparison was found to be good. Parametric study was carried out to find out the effect of shape, size and spacing of keel plate and from the results obtained from present work ,it is recommended to use circular keel plate instead of square plate.

• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.155-159
• /
• 2005

This study was carried out to investigate the effects of cultivars and to establish the hydroponic cultivation method of spinach (Spinacia oleracea L.) f3r autumn season. Considering the rate of germination, plant height is 25 cm interior and exterior and leaf blade and petiole attitude is erect the best two cultivars 'Artlars', 'Dimple' were selected among the 19 cultivars tested. Seed germination was more than $90{\%}$ in both cultivars of 'Artlars', 'Dimple'. Seed rate of germination drops more or less, but it was cultivar that 'Mahoroba' cultivars is becoming in export standard production, and 'Premium', 'Platon' cultivar which plant height of leaf blade and petiole attitude is erect is about 20 cm was thought by suitable cultivars to domestic. Plant height relationship difference that follow to planting distances decreased according as planting distances growth than $12{\times}11$ cm to $12{\times}15$ cm. In the meantime, the increase of leaf area and fresh weight was increasing transplanting distance. The yield per ha of 14,890 kg in the $12{\times}11$ cm was $67{\%}$ increased than that in the $12{\times}9$ cm. Therefore, $12{\times}11$ cm spacing is considered optimum planting distance for spinach hydroponic cultivation in autumn season.

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.334-342
• /
• 2016

In order to evaluate the modified installation methods of roof ventilation devices, derived from the previous experiment ('investigation into the optimum capacity of roof ventilation devices and their deployment'), the conventional and modified (improved) roof ventilation systems were installed in the single-span plastic greenhouse for growing oriental melons. The roof vents ($60{\varphi}$) and roof fans (maximum air capacity of $38m^3/min$) were installed in the spacing of 15m (FT, modified 'side vent+roof fan' ventilation) and 6m (TT, modified 'side vent+roof vent' ventilation) respectively on the roof of greenhouses for the modified roof ventilation treatments, and 20m (FC, conventional 'side vent+roof fan' ventilation) and 8m (TC, conventional 'side vent+roof vent' ventilation) for the conventional ones. The stem diameter, leaf blade lengh, petiole length, and leaf width were lower in the FT and TT treatments than those in the conventional treatments, FC and TC. Although the fruit weight and total yields were slightly lower in the FT and TT treatments, the marketable fruit ratio (%) were higher, as a result of increased fruiting ratio (%) in these treatments, than those of FC and TC. The marketable yields (kg/10a) in the FT and TT treatments were 8,391 kg/10a and 7,283 kg/10a, which were respectively 661 kg/10a and 487 kg/10a higher than those in the treatments of FC and TC. The modified installation methods of roof fan resulted in production of more female flowers and lower fruit drop ratio (%) compared to conventional meathods. In the treatment of the conventional ventilation with roof vent, the fruit weight, fruit length & width, and flesh thickness were higher than in other treatments, but there were no significant differences in the fruit width and flesh thickness among the treatments.

• Asian Journal of Turfgrass Science
• /
• v.1 no.1
• /
• pp.7-17
• /
• 1987

The experiment with two levels of nitrogen (0. and 300kg / ha / year) and two levels of clipping height (1.5cm and 4cm) was conducted on the field during the period 3 June to 23 October 1985. Clonal lines of korean lawngrass ( Zoysia japonica Steud.) and manilagrass ( Zoysia matrella ( L.) Merr.)of Daejon origin were established in June, as individual clone in rows 30cm apart with a 40cm spacing between clones, actually 4 clones each plot. The results obtained were as follows : 1. When no nitrogen was applied to korean lawngrass, leaf blade which appeared during the August / early September period remained green for a period of about 10 weeks and even leaves emerged in late September lived for 42 days. However, leaf longevity did not exceed 8 weeks as nitrogen was applied. In contrast the leaf longevity of manilagrass which emerged during the mid - August / early September period was 11 weeks and, under the nitrogen applied, 9 weeks, indicating that the life - saen of individual leaf of manilagrass may be longer than that of korean lawngrass. Meanwhile, clipping height had no effect on the leaf longevity in both grasses. 2. During the July / August period, tiller number, green leaf number and DM weight of korean lawngrass were increased significantly with fertilizer nitrogen, but were not with two levels of clipping height. This trend was reversed after late September : no effect of nitrogen was appeared. Instead, lax clipping increased tiller number, green leaf number and DM weight. Green leaves stimulated by lax clipping resulted in the occurrance of more dead leaves in late October. 3. The increase of tiller number, green leaf number, and DM weight of korean lawngrass due to nitrogen application appeared to be of significance in early September. Unlike korean lawngrass, however, this significant increase was maintained to late October when new green leaves still emerge. Clipping height had little effect on the growth of manilagrass by early September, but since then, lax clipping stimulated leaf appearance, possibly resulting in a remained green color of manilagrass turf. 4. Among the stolons outgrown until early September, the primary stolon was not influenced by nitrogen and clipping treatments to produce only 2 - 3 stolons. However, 1st branch stolon as affected by nitrogen increased significantly, so most of stolons which occurred consisted of 1st branch stolon. 5. Until early September, stolon length obtained at nil nitrogen level was chiefly caused by lengthening the primary stolons. By applying nitrogen the primary stolons of korean lawngrass was longer than 1st branch stolons when severe clipping was involved and in turn, shorter than 1st branch stolons when lax clipping was concerned. In manilagrass, 1st branch stolons were much longer than the primary stolons when turf was clipped severely but in conditions of lax clipping, there was little difference in length between primary and 1st branch stolons. 6. Stolon nodes of both korean lawngrass and manilagrass were positively influenced by nitrogen, but no particular increases by imposing clipping height treatment was marked in manilagrass. Although the stolon of korean lawngrass was grown until late october, the growth stimulated by nitrogen was not so remarkable as to exceed that a by nil N. 7. The thickness of korean lawngrass and manilagrass was greatest in late September, but that of manilagrass did not differ significantly from that in late October. 8. The response of stolon length of korean lawngrass to lax clippings was not so great in late October as to that to severe clippings. On the other hand, the positive effect of lax clippings to stolon length in m anilagrass was confirmed even in late October.