• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.161-169
• /
• 2009

The objective of this study was to investigate stability of Korean Paper(Hanji) which is being sold in the Korean markets according to aging treatment. In order to know the aging characteristics, the optical and mechanical properties of before and after wet and dry-heat aging treatment were examined. The optical and mechanical properties were shown higher reduction in the dry-heat aging treatment compared to the wet-heat aging treatment. The Soonji (pure mulberry Hanji) made from black mulberry bast pulp was shown a great reduction of the brightness and whiteness, and increase of the opacity in the aging treatment. On the other hand, in case of mechanical properties, the breaking length of Soonji made from white mulberry bast pulp was significantly higher than that of the others, and the tensile strength was shown drastic reduction in according to Soonji made from black mulberry bast pulp in the aging treatment. The burst strength of Soonji made from black and white mulberry bast pulp was shown the similar value in the wet-heat aging treatment. The folding endurance of Soonji made from white mulberry bast pulp was significantly higher than that of others before and after aging treatment. Consequently, Hanji was affected sensitive in the temperature compared to the humidity. Meanwhile, the density and color of the chinese ink was no significant changes before and after wet and dry-heat aging treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.59-66
• /
• 2011

This study was carried out to develop the automation bark peeling process of paper mulberry for making Hanji. Nowadays, almost raw material has been imported from south-east asia for making Hanji. Raw material dependence is very high for Hanji-making by low productivity in korea. This study is focused on the resolution for problem of bark peeling automation. Water and sand jet of compressed air was possible bark peeling for black bast fiber. The effect of removing black bast fiber increased the longer the steaming time. Also using drum of bark peeling showed that results under temperature $80^{\circ}C$ and Rpm 50/min were best bark peeling and separating bast fiber from stem. The contents of holocellulose, lignin, ethanol-benzene extractives, and ash were 91.63~95.55%, 1.4~2.0%, 1.12~1.65%, and 1.4~4.3%, respectively. Chemical characteristics are similar between imported raw-material with drum bark.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.1
• /
• pp.74-82
• /
• 2011

The bast fiber of Paper mulberry has been generally used as a fibrous raw material in traditional Hanji-making. Nowadays, its uses is expanded to different special purposes such as paper mulberry yarn, laminated paper, antimicrobial paper depending on its application. Despite the wide array of the use of mulberry fibers, it is still limited due to some difficulties in the automation process of manufacturing works. This study is focused on the analysis of chemical components and morphological properties of paper mulberry bark for the automation of bark peeling process. The bast tissue of paper mulberry was separated in three plies; black outer layer, green inner layer, and white inner layer. The total lignin content, holocelluloses, extractives and ashes, and the anatomical structure of the three layers in mulberry bark tissue were investigated. The analysis showed that the black outer layer is composed of about 50% of total lignin content, whereas the white inner layer is composed of about 90% of holocellulose content.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.36-44
• /
• 2013

This study is focused on the debarking and xylem separation yield of Paper Mulberry. We investigated the most efficient manual on the automatic debarking and xylem separator machine. The bast tissues of Paper Mulberry were separated in three layers including black outer layer, green inner layer, and white inner layer. A target is to save the white inner layer of these three layers as much as possible. The experimental machine most characterize xylem separation and debarking by frictional force between the bulges and Paper Mulberry by the drum rotation. It is possible automatically to operate the machine by controlling the temperature sensor and the time. Debarking process can be know that removed black outer layer has beem accumulate and measured the weight. The content of the extract, holocellulose, lignin and ashes of the white inner layer was analyzed. It is result that conditions of optimum process of the experimental machine is 45 RPM, temperature at $60^{\circ}C$(60 min.) and $80^{\circ}C$(60 min.), mixing bulge of 10 mm(120ea) and 30 mm(120ea) and capacity of Paper Mulberry 10 kg.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.121-124
• /
• 2011

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.213-216
• /
• 2011

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.6-11
• /
• 2001

In order to use bast fibers of mulberry tree at a pulp source of Hanji, the bast fibers were microbiologically treated with several wood rot fungi, and the microscopic characteristics of bast fibers depending on treatment days were evaluated. By wood rot fungi, Phanerochaete chrysosporium and Trametes versicolor, the weight reduction ratio was approximately 50 percent within incubation for 20 days. occurring together with decomposition of useful fibers. However, Hwterobasidion insularis and Stereum hirsutum have completely decomposed the utmost layer of black blue colored bast fibers, and not caused the damage if fibers. Until incubation for 10 days, the cellulose content of vast fibers by Stereum hirsutum was 78.9 percent with lignin content of 7.2 percent, showing an appropriate decomposition for useful fibers. By microscopic observation, the bundled fibers were separated to single fiber within treatement days 30 by Pleurotus ostreatus, and there were no damage on the surface of fiber by treatment days 50.