• 한국전기전자재료학회논문지
• /
• 제28권3호
• /
• pp.149-153
• /
• 2015

As the temperature of the panel increases in AC-PDPs, the minimum driving voltage increases. Also, as the more the number of discharge increases in cells, the probability of the strong dark discharge in the reset period increases. In this study, we investigated the relationship between the lag time of the discharge and the mechanism of mis-discharges which are the black noise and bright noise. We conclude that the variation of time lag characterizes the properties of exo-electron emission from MgO. Thus, we found that the main factor of the mis-discharges is the rate of change of the electron emission ability from the MgO surface.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.863-864
• /
• 2008

To predict the iris matching performance and guarantee its reliability, image quality measure prior to matching is desired. An analysis on iris image degradation factors which deteriorate matching performance is a basic step for iris image quality measure. We considered five degradation factors-white-out, black-out, noise, blur, and occlusion by specular reflection-which happen generally during the iris image acquisition process. Experimental results show that noise and white-out degraded the EER most significantly, while others on EER were either insignificant or degradation images resulted in even better performance in some cases of blur. This means that degradation factors that affect the performance can be different from those based on human perception or image degradation evaluation.

• 제어로봇시스템학회논문지
• /
• 제22권4호
• /
• pp.247-252
• /
• 2016

In this paper, we propose a new defect detection technology for micro-defect on the surface of steel products. Due to depth and size of microscopic defect, slop of surface and vibration of strip, the conventional optical method cannot guarantee the detection performance. To solve the above-mentioned problems and increase signal to noise ratio, a novel retro-schlieren method that consists of retro reflector and knife edge is proposed. Moreover dual switching lighting method is also applied to distinguish uneven micro defects and surface noise. In proposed method, defective regions are represented by a black and white pattern. This pattern is detected by a defect detection algorithm with Gabor filter. Experimental results by simulator for sample defects of cold rolled steel show that the proposed method is effective.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권2호
• /
• pp.79-85
• /
• 2020

The influence of metal artifact in CT image depends on the type of metal materialsm, the reconstruction algorithm, and scan parameters. The presence of metal artifacts was quantitatively evaluated by applying the standard and MAR algorithms through the phantom study. In the change of tube voltage applied the standard algorithm, metal artifact decreased to 44.9% for 80 vs 120 kVp, 24% for 100 vs 120 kVp, while the image taken at 140 kVp increased the artifact by 19% compared to 120 kVp. When the tube current was increased from 100 to 300 mA, there was no significant difference in the CT value and noise. Black band and white strike artifacts occurred up to 65.9% in the adjacent ROI of the metal driver, whereas titanium screw produced lesser metal artifact than that of the metal driver. The combination of 120kVp or higher tube voltage-standard algorithm was effective in removing black band artifacts as well as white streak by high density materials. However, MAR reconstruction algorithm was useful in improving image quality under the environment of low kVp and high density materials, without increase of radiation exposure.

• 천문학회보
• /
• 제42권2호
• /
• pp.53.3-53.3
• /
• 2017

The pilot study of SLGT (Superconducting Low-frequency Gravitational-wave Telescope) is being performed by KKN (KASI-KISTI-NIMS) collaboration. In this presentation, we discuss prospectives of detecting GWs in the low-frequency band (0.1-10 Hz), which is a target frequency band of SLGT, but can be hardly observed by advanced LIGO. IMBHBs (Intermediate Mass Black Hole Binaries) and IMRIs (Intermediate Mass Ratio Inspirals) with total masses of O(1000) up to O(10,000) solar masses are most probable sources between 0.1-10 Hz. We estimate horizon distances and signal to noise ratios of IMBHBs and IMRIs for different SLGT design sensitivities. Based on our calculations, detection rates for IMBHBs and IMRIs with SLGT will be discussed.

• 전자공학회논문지
• /
• 제53권5호
• /
• pp.163-167
• /
• 2016

본 논문은 밀리미터파 라디오미터를 이용한 의료응용의 한 분야인 인체 내부의 밝기온도 측정에 관한 연구이다. 밀리미터파 대역 중에서 Ka - band의 주파수 영역에서 동작하는 렌즈, 직접 검출 수신기, 캘리브레이션 소스 등을 설계 제작하여 라디오미터 시스템을 구성하였다. 밀리미터파 렌즈 초점에 수신안테나를 스캔하는 방식을 통하여 미약한 신호를 수신하였으며, 렌즈 수차를 감소시키기 위해 광선 추적 방법을 사용하여 비구면 렌즈를 설계 하였다. 직접 검출 수신기는 Dicke 타입 수신기 형태로 설계되었으며, 제작된 수신기의 잡음지수는 3.3 dB, 온도감도는 0.1 K으로 측정되었다. 라디오미터의 수신기 교정은 밀리미터파 대역에서 사용가능한 새로운 형태의 블랙바디(Black body)를 제작하여 물체의 등가 잡음온도와 출력전압의 관계를 도출하였다. 제작된 시스템을 이용하여 1.7 m 거리에서 인체의 상반신을 측정하여 약 $38^{\circ}$[C]의 밝기온도를 측정하였다. 적외선 영상과 라디오미터 영상의 비교를 통해 상반신의 밝기온도 영상을 통하여 밀리미터파 라디오미터의 의료응용 가능성을 제시하였다.

• 한국항행학회논문지
• /
• 제23권1호
• /
• pp.61-68
• /
• 2019

블랙박스 본체를 회수하지 않고도 블랙박스의 정보나 수중 장비의 기록된 정보 등을 회수할 수 있도록 빛을 이용하는 수중 무선 광 통신 시스템은 매우 요긴하다. 본 논문에서는 탁도가 높은 천해환경에서 수중 가시광 통신시 발생하는 노이즈 원인을 분석하고 이러한 환경에서도 노이즈를 효과적으로 제거하면서도 광 검출신호의 최대 전압 스윙을 향상시킬 수 있는 기준신호 기반의 광 검출 센서 기술을 연구하였다. 그리고 개발한 통신 시스템의 성능을 입증하기 위해 광 무선통신 시스템을 제작하고 탁한 해수가 담긴 수조에서 송수신 시험을 수행하여 개발한 광 무선통신 기법이 실제로 효과가 있음을 검증하였다.

• 대한전자공학회논문지SD
• /
• 제37권2호
• /
• pp.5-12
• /
• 2000

열전퇴의 고온 접합부가 Si/sub 3/N/sub 4//SiO/sub 2//Si/sub 3/N/sub 4/ 멤브레인에 의해 실리콘 기판으로부터 열차단되고, 열전퇴의 저온 접합부는 방열판 역할을 하는 실리콘 림(rim)에 의해 지지되는 멤브레인위에 놓여지며, Au-black이 적외선 흡수체로 사용되는 비냉각 금속 박막형 열전퇴 적외선 검지기를 제작하고, 적외선 검지기의 성능지수에 대해 논의하였다. 3∼14㎛의 파장범위에서 Au-black의 적외선 흡수도는 대개 90%정도였고, Au 증발시의 챔버압력 및 증착된 Au-black의 단위면적당 질량에 크게 의존하였다. 쵸핑 주파수가 5 Hz일 때 Bi-Sb 열전퇴 적외선 검지기의 전압 감응도, 잡음등가전력 및 비검지도는 실온의 공기중에서 각각 약 10.5V/W, 2.3 ㎻/㎐½, 및 1.9×10/sup 7/㎝·㎐½/w였다.

• 한국정보기술학회 영문논문지
• /
• 제9권1호
• /
• pp.115-125
• /
• 2019

In this paper, the image is received from the camera and the lane is sensed. There are various ways to detect lanes. Generally, the method of detecting edges uses a lot of the Sobel edge detection and the Canny edge detection. The minimum use of multiplication and division is used when designing for the hardware configuration. The images are tested using a black box image mounted on the vehicle. Because the top of the image of the used the black box is mostly background, the calculation process is excluded. Also, to speed up, YCbCr is calculated from the image and only the data for the desired color, white and yellow lane, is obtained to detect the lane. The median filter is used to remove noise from images. Intermediate filters excel at noise rejection, but they generally take a long time to compare all values. In this paper, by using addition, the time can be shortened by obtaining and using the result value of the median filter. In case of the Sobel edge detection, the speed is faster and noise sensitive compared to the Canny edge detection. These shortcomings are constructed using complementary algorithms. It also organizes and processes data into parallel processing pipelines. To reduce the size of memory, the system does not use memory to store all data at each step, but stores it using four line buffers. Three line buffers perform mask operations, and one line buffer stores new data at the same time as the operation. Through this work, memory can use six times faster the processing speed and about 33% greater quantity than other methods presented in this paper. The target operating frequency is designed so that the system operates at 50MHz. It is possible to use 2157fps for the images of 640by360 size based on the target operating frequency, 540fps for the HD images and 240fps for the Full HD images, which can be used for most images with 30fps as well as 60fps for the images with 60fps. The maximum operating frequency can be used for larger amounts of the frame processing.

• 한국소음진동공학회논문집
• /
• 제16권2호
• /
• pp.115-123
• /
• 2006

A feasibility of using the topology optimization method for structural damage identification is investigated for the first time. The frequency response functions (FRFs) are assumed to be constructed by the finite element models of damaged and undamaged structures. In addition to commonly used resonances, antiresonances are employed as the damage identifying modal parameters. For the topology optimization formulation, the modal parameters of the undamaged structure are made to approach those of the damaged structure by means of the constraint equations, while the objective function is an explicit penalty function requiring clear black-and-white images. The developed formulation is especially suitable for damage identification problems dealing with many modal parameters. Although relatively simple numerical problems were considered in this investigation, the possibility of using the topology optimization method for structural damage identification is suggested through this research.