• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.15.2-15.2
• /
• 2009

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1234-1240
• /
• 2004

We studied on the electro-optic characteristics and dynamic stability according to an undesirably defined pretilt angle induced in high step coverage of pixel area for the Twisted Nematic (TN) / Fringe-Field Switching (FFS) mode. In case of the TN mode, LC directors twist reversely near the edges of thin-film-transistor and black matrix where the pretilt angle of the LC is not well defined. Therefore, the voltage-dependent dynamics of the LC in TN mode is unstable and shows the bad electro-optic characteristics. On the other hand, in case of the FFS mode, the LCs are twisted parallel to the bottom substrate by fringe electric field and the electro-optic characteristic is not influenced by the pretilt angle of the LC which is not well defined.

• Advances in materials Research
• /
• 제2권4호
• /
• pp.181-193
• /
• 2013

Description and theory of spin coating technique has been elaborately outlined and a spin coating machine designed and fabricated using affordable components. The system was easily built with interdisciplinary knowledge of mechanics, fluid mechanics and electronics. This equipment employs majorly three basic components and two circuit units in its operation. These include a high speed dc motor, a proximity sensor mounted at a distance of about 15 mm from a reflective metal attached to the spindle of the motor to detect every passage of the reflective metal at its front and generate pulses. The pulses are transmitted to a micro-controller which process them into rotational speed (revolution per minute) and displays it on a lead crystal display (LCD) which is also a component of the micro-controller. The circuit units are a dc power supply unit and a PWM motor speed controlling unit. The various components and circuit units of this equipment are housed in a metal casing made of an 18 gauge black metal sheet designed with a total area of 1, $529.2cm^2$. To illustrate the use of the spin-coating system, ZnO sol-gel films were prepared and characterized using SEM, XRD, UV-vis, FT-IR and RBS and the result agrees well with that obtained from standard equipment and a speed of up to 9000 RPM has been achieved.

• Journal of Electrochemical Science and Technology
• /
• 제9권4호
• /
• pp.330-338
• /
• 2018

The adhesion strength as well as the electrochemical properties of $LiNi_{0.4}Mn_{0.4}Co_{0.2}O_2$ electrodes containing various conductive carbons (CC) such as fiber-like carbon, vapor-grown carbon fiber, carbon nanotubes, particle-like carbon, Super P, and Ketjen black is compared. The morphological properties is investigated using scanning electron microscope to reveal the interaction between the different CC and the active material. The surface and interfacial cutting analysis system is also used to measure the adhesion strength between the aluminum current collector and the composite film, and the adhesion strength between the active material and the CC of the electrodes. The results obtained from the measured adhesion strength points to the fact that the structure and the particle size of CC additives have tremendous influence on the binding property of the composite electrodes, and this in turn affects the electrochemical property of the configured electrodes.

• 한국자원식물학회지
• /
• 제27권1호
• /
• pp.102-109
• /
• 2014

본 연구는 태양초 생산시 전처리와 산광 재료가 상품성과 건조 효율에 미치는 효과를 구명하기 위하여 실시하였다. 벌크, 하우스 밀폐, PE비닐밀봉 처리 등 전처리를 하였으며, 산광 재료로 대조구, 차광망 35%, 천막지, 백색부직포, 흑색부직포 등을 사용하였다. 벌크 후숙 처리구의 상품 수량이 300 g으로 가장 많았으며, 하우스 건조가 275 g이었으며, PE 밀봉 처리구가 112 g으로 가장 적었다. 적색도는 PE 밀봉 처리시 17.85로 가장 높았고 벌크 후숙 처리에서 가장 낮았으며, 각각의 처리 간에 유의성이 인정되었다. 고추의 수분 감모 속도는 대조구가 가장 빨랐으며, 차광망 처리구가 가장 늦었다. 상품 수량지수는 백색부직포가 대조구 100%에 비해 114%로 가장 높았다. 적색도는 흑색부직포와 천막지가 15.65로 다른 처리와 유의성을 나타냈다. 캡사이신 함량은 흑색부직포에서 $160mg{\cdot}100g^{-1}$로 가장 높았다. 비닐하우스 이용 태양초 생산시 비닐하우스 밀폐 전처리를 하고 백색부직포로 산광하면 대조구보다 건조기간은 2일 정도 지연되었으나 상품 수량은 14% 증가하였다. 본 실험에서 얻어진 결과는 태양초 생산 효율 증진뿐만 아니라 향후 연구에 도움이 되리라 기대된다.

• 한국환경농학회지
• /
• 제35권3호
• /
• pp.202-210
• /
• 2016

BACKGROUND: This study was conducted to determine effects of ridging systems and plastic film mulch types on growth, yield, and profitability of potato (Solanum tuberosum L.) in spring cropping using paddy field and to suggest profitable ridging system and plastic mulch type.METHODS AND RESULTS: Two potato cultivars ('Goun', and 'Atlantic') were grown at paddy field located in Gangneung in spring. For treatments, ridging systems were one-row ridge (OR) and two-row ridge (TR). Mulch types were no-mulch (NM), black plastic film mulch (BPM), and transparent plastic film mulch (TPM). Emergence of sprout was affected by the mulch types and the fastest level was shown at TPM treatment. Accumulative soil temperature during sprouting was 16.2℃ higher at TR than at OR and also higher at TPM than at BPM or NM. Stem length was not affected by ridging systems or mulch types. Leaf area index (LAI) was influenced by mulch types, while not by ridging systems. The highest LAI was shown at TR with TPM and OR of BPM. There was no significant difference in specific gravity or dry matter rate by ridging systems and mulch types. Tuber yield was significantly influenced by ridging systems and mulch types. Mean tuber weight was heavier at OR treatment than at TR and also the heaviest at TPM among mulch types. The highest marketable yield was found at OR with BPM. Based on marketable tuber yield and market price, the highest income ratio in two cultivars was found at OR with BPM and it was 20~82% higher than the ratio at TR with TPM.CONCLUSION: In spring potato cropping using paddy field, OR with BPM is better for high yield and is more profitable for farmer's income than the conventional cultivation method, TR with TPM.

• Journal of Periodontal and Implant Science
• /
• 제30권3호
• /
• pp.619-632
• /
• 2000

This clinical study was designed to determine the clinical and microbiological outcomes and safety of using minocycline loaded polycaprolactone strip for pericoronitis patients. 64 patients showing symptoms and signs of pericoronitis were enrolled according to the inclusion criteria in this double blind study. They were randomly assigned to two groups. 32 patients comprised control group and they received only polycaprolactone films in pericoronal spaces, and another 32 patients comprised experimental group and they received polycaprolactone films loaded with 30% minocycline. Informed consent was obtained from all the participants before beginning the study. At the initial visit, gingival index(GI), papillary bleeding index(PBI), amount of gingival crevicular fluid(GCF) were recorded, and microbiological sampling was done. Then, loaded or unloaded polycaprolactone film was inserted into the pericoronal spaces. No drug was prescribed excepting this film. After one week, clinical and microbiological exam was repeated. Presence of any side effects or inconveniences were checked. Chi-square test and t-test was performed to compare outcomes. At baseline, there were no significant differences in all the criteria between experimental group and control group. Experimental group showed significant improvement compared with control group both in GI(p<0.01) and PBI(p<0.01). The amount of GCF of the experimental group was significantly decreased compared with the control group(p<0.01) and baseline(p<0.01). In microbiological study, percentage of motile rod was prominently decreased in the experimental group. Also, aerobic(p<0.001), anaerobic(p<0.001) and black pigmented(p<0.01) bacteria were significantly decreased from the baseline. Furthermore, no side effects or inconveniences was reported in the experimental group. From this study, it was concluded that insertion of polycaprolactone film with 30% minocycline into the pericoronal spaces would be effective and safe treatment for pericoronitis.

• 생물환경조절학회지
• /
• 제7권3호
• /
• pp.259-267
• /
• 1998

하우스 밀감의 품질을 향상시키고자 궁천조생을 공시하고 중간단수후 10일 후에 유공흑색필름, 부직포, 타이백을 수관하부에 멀칭하고 품질조사를 하였다. 하우스에서 멀칭재료에 따른 산란광의 변화는 타이백, 부직포, 흑색유공필름, 무처리 순으로 증가되는 경향이었다. 2. 과피의 착색도 a는 타이백 처리구가 무처리에 비해 6.39 높아서 타이백 멀칭효과가 매우 높았으며 a/b도 이와 유사한 경향을 나타내었으나 유의차는 없었다. 과즙의 glucose 함량은 무처리에 비해 멀칭처리구에서 많은 경향이었으나 처리간에 유의차가 없었고 fructose 함량은 무처리에 비해 타이백 멀칭구에서 0.31%/mL가 많았다. Sucrose 함량에도 차이가 있어서 무처리에 비해 타이백 멀칭구에서 1.36%/mL가 증가되었으며, 총 당도 sucrose와 유사한 경향이었다. 당은 타이백 멀칭구에서 12.4 $^{\circ}$Brix, 무처리에서 11.5 $_{\circ}$ Brix로 타이백 멀칭구가 무처리에 비해 0.9 $^{\circ}$Brix증가되어 타이백 멀칭효과가 현저하였음을 실증하였으나 산도는 멀칭처리 구간에 큰 차이를 나타내지 않았다

• Journal of the Korean Wood Science and Technology
• /
• 제29권1호
• /
• pp.31-42
• /
• 2001

본 실험은 생산지별 채취시기별 물리적 화학적 성상의 차이를 파악하여, 그 상이성을 최소화하여 비교적 높은 품질의 옻칠을 생산하기 위한 기초자료를 제공하고자 수행하였다. 실험에 사용한 생칠은 국내 원주산 생칠과 중국의 섬서성(陳西省)산 생칠, 귀주성(貴州省)산 생칠, 안휘성(安微省)산 생칠 등이었다. 정제 특성 실험은 실험실용 정제기에 의하여 수행하였으며 이 정제기에 의해서 생산된 옻칠은 도막의 건조시간, 인장강도, 도막의 균일성 등과 같은 기계적 성질을 시험하였다. 도막은 자동 도포기(Film applicator)로 만들었고, 만들어진 도막은 만능재료시험기를 이용하여 인장강도를 시험하였다. 도막의 균일성은 주사전자현미경과 공초점 현미경에 의하여 2차원 및 3차원 화상을 얻어 판정하였다. 채취시기에 따른 정제조건 변이는 없었으나 생산된 옻칠의 점도는 시기에 따라 크게 변함을 알 수 있었다. 흑칠 제조시 철분의 굵기에 따라 혼합시기를 다르게 함으로써 이 흑칠의 점도를 조절할 수 있었다. 정제시간의 길이, 점도, 인장강도 등이 정제조건보다는 산지에 따라서 크게 달라짐을 알 수 있었다.

• 청정기술
• /
• 제19권4호
• /
• pp.410-415
• /
• 2013

폴리이미드(polyimide) 필름 위에 은(Ag) 나노 페이스트(paste)가 인쇄된 집전체 및 활성탄소(activated carbon)를 이용하여 제조한 페이스트와 5% potassium polyacrylate (PAAK) 겔(gel) 전해질을 이용하여 슈퍼캐패시터(supercapacitor) 반쪽전지(half cell)를 제작하였다. 집전체 및 전극은 스크린 인쇄를 이용하여 제작하였으며 인쇄된 집전체의 두께는 $7.3{\mu}m$이고 면저항은 $5{\sim}7m{\Omega}/square$이다. 전극 페이스트는 비표면적 $1,968m^2/g$인 활성탄소이고 도전재는 카본 블랙(carbon black)을 사용하였으며 바인더로는 poly (4-vinylphenol)를 7:1:3 비율로 혼합하고 2-(2-buthoxyethoxy) 에틸아세테이트(BCA)를 주 용매로 사용하여 제조하였다. 전기화학적 분석을 위해 순환-전압 전류법(cyclic voltammetry)을 이용하여 전기화학적 특성과 안정도를 평가하였으며 순환-전압전류법 측정을 위한 인가 전압의 범위는 -0.5 V~0.5 V이고 주사속도(scan rate)의 범위는 10~500 mV/s로 하였다. 제작된 슈퍼캐패시터 반쪽전지의 비축전 용량은 주사속도가 10 mV/s, 500 mV/s일 때 각각 44.04 F/g, 8.62 F/g이었다.